[Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix PHY init with partial BIOS config (rev2)

[Imre Deak]

On pe, 2016-04-22 at 07:27 +0000, Patchwork wrote:
> == Series Details ==
> 
> Series: drm/i915/bxt: Fix PHY init with partial BIOS config (rev2)
> URL   : https://patchwork.freedesktop.org/series/6010/
> State : failure
>

Thanks for the review I pushed the patchset to -dinq. Explanation for
the failure below.

> == Summary ==
> 
> Series 6010v2 drm/i915/bxt: Fix PHY init with partial BIOS config
> http://patchwork.freedesktop.org/api/1.0/series/6010/revisions/2/mbox
> /
> 
> Test kms_flip:
>         Subgroup basic-flip-vs-wf_vblank:
>                 fail       -> PASS       (ilk-hp8440p) UNSTABLE
> Test kms_force_connector_basic:
>         Subgroup prune-stale-modes:
>                 pass       -> SKIP       (ilk-hp8440p)

Unrelated platform and I can't find the log for such SKIP results.

> Test kms_pipe_crc_basic:
>         Subgroup read-crc-pipe-c:
>                 pass       -> FAIL       (bdw-nuci7)

Unrelated platform, I contribute it to the other pipe-crc errors where
the HDMI connector vanishes in the middle of the test run, although
here the failure mode is a bit different with timing out during the CRC
read:
 
IGT-Version: 1.14-gde4f3ab (x86_64) (Linux: 4.6.0-rc4-CI-Patchwork_1983+ x86_64)
read-crc-pipe-C: Testing connector HDMI-A-2 using pipe C
Timed out: CRC reading
Subtest read-crc-pipe-C: FAIL (5.091s)

Subtest read-crc-pipe-C failed.
**** DEBUG ****
(kms_pipe_crc_basic:6663) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes)
(kms_pipe_crc_basic:6663) INFO: read-crc-pipe-C: Testing connector HDMI-A-2 using pipe C
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: set_pipe(C)
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: commit {
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display:     HDMI-A-2: Selecting pipe C
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: }
(kms_pipe_crc_basic:6663) DEBUG: Clearing the fb with color (0.00,1.00,0.00)
(kms_pipe_crc_basic:6663) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x0, size=0)
(kms_pipe_crc_basic:6663) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680)
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: C.0: plane_set_fb(67)
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: commit {
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display:     HDMI-A-2: Selecting pipe C
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display:     HDMI-A-2: SetCrtc pipe C, fb 67, panning (0, 0), mode 1920x1080
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: }
(kms_pipe_crc_basic:6663) igt-core-INFO: Timed out: CRC reading

> 
> bdw-
> nuci7        total:193  pass:180  dwarn:0   dfail:0   fail:1   skip:1
> 2 
> bdw-
> ultra        total:193  pass:170  dwarn:0   dfail:0   fail:0   skip:2
> 3 
> bsw-nuc-
> 2        total:192  pass:152  dwarn:0   dfail:0   fail:0   skip:40 
> byt-
> nuc          total:192  pass:154  dwarn:0   dfail:0   fail:0   skip:3
> 8 
> hsw-
> brixbox      total:193  pass:169  dwarn:0   dfail:0   fail:0   skip:2
> 4 
> hsw-
> gt2          total:193  pass:174  dwarn:0   dfail:0   fail:0   skip:1
> 9 
> ilk-
> hp8440p      total:193  pass:135  dwarn:0   dfail:0   fail:0   skip:5
> 8 
> ivb-
> t430s        total:193  pass:165  dwarn:0   dfail:0   fail:0   skip:2
> 8 
> skl-i7k-
> 2        total:193  pass:168  dwarn:0   dfail:0   fail:0   skip:25 
> skl-
> nuci5        total:193  pass:182  dwarn:0   dfail:0   fail:0   skip:1
> 1 
> snb-
> dellxps      total:193  pass:155  dwarn:0   dfail:0   fail:0   skip:3
> 8 
> snb-
> x220t        total:193  pass:155  dwarn:0   dfail:0   fail:1   skip:3
> 7 
> 
> Results at /archive/results/CI_IGT_test/Patchwork_1983/
> 
> d5b5101bd09a7b7e48b1cd78fe8f8a40b21d4deb drm-intel-nightly: 2016y-
> 04m-21d-16h-37m-06s UTC integration manifest
> 76092d6 drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already
> enabled
> 0ed1b74 drm/i915/bxt: Use PHY0 GRC value for HW state verification
>