[Intel-gfx] [PATCH v5 2/3] drm/i915/dsi: add support for gpio elements on CHV

[Ville Syrjälä]

On Tue, Apr 26, 2016 at 01:27:40PM +0300, Jani Nikula wrote:
> Add support for CHV gpio programming in DSI gpio elements.
> 
> v2: Overhaul macros according to Ville's review.
> 
> v3: Address Ville's review:
>  - swap E and SE gpio ranges
>  - add a note about max SE index
>  - use GPO, not HIZ
>  - swap cfg0 and cfg1
> 
> v4: fix port for dsi sequence versions 1 and 2
> 
> [Rewritten by Jani, based on earlier work by Yogesh and Deepak.]
> 
> Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu at intel.com>
> Signed-off-by: Deepak M <m.deepak at intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 70 ++++++++++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index a1cc8533cff5..f122484bedfc 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -95,6 +95,24 @@ static struct gpio_map vlv_gpio_table[] = {
>  	{ VLV_GPIO_NC_11_PANEL1_BKLTCTL },
>  };
>  
> +#define CHV_GPIO_IDX_START_N		0
> +#define CHV_GPIO_IDX_START_E		73
> +#define CHV_GPIO_IDX_START_SW		100
> +#define CHV_GPIO_IDX_START_SE		198
> +
> +#define CHV_VBT_MAX_PINS_PER_FMLY	15
> +
> +#define CHV_GPIO_PAD_CFG0(f, i)		(0x4400 + (f) * 0x400 + (i) * 8)
> +#define  CHV_GPIO_GPIOEN		(1 << 15)
> +#define  CHV_GPIO_GPIOCFG_GPIO		(0 << 8)
> +#define  CHV_GPIO_GPIOCFG_GPO		(1 << 8)
> +#define  CHV_GPIO_GPIOCFG_GPI		(2 << 8)
> +#define  CHV_GPIO_GPIOCFG_HIZ		(3 << 8)
> +#define  CHV_GPIO_GPIOTXSTATE(state)	((!!(state)) << 1)
> +
> +#define CHV_GPIO_PAD_CFG1(f, i)		(0x4400 + (f) * 0x400 + (i) * 8 + 4)
> +#define  CHV_GPIO_CFGLOCK		(1 << 31)
> +
>  static inline enum port intel_dsi_seq_port_to_port(u8 port)
>  {
>  	return port ? PORT_C : PORT_A;
> @@ -232,6 +250,56 @@ static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
>  	mutex_unlock(&dev_priv->sb_lock);
>  }
>  
> +static void chv_exec_gpio(struct drm_i915_private *dev_priv,
> +			  u8 gpio_source, u8 gpio_index, bool value)
> +{
> +	u16 cfg0, cfg1;
> +	u16 family_num;
> +	u8 port;
> +
> +	if (dev_priv->vbt.dsi.seq_version >= 3) {
> +		if (gpio_index >= CHV_GPIO_IDX_START_SE) {
> +			/* XXX: it's unclear whether 255->57 is part of SE. */
> +			gpio_index -= CHV_GPIO_IDX_START_SE;
> +			port = CHV_IOSF_PORT_GPIO_SE;
> +		} else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
> +			gpio_index -= CHV_GPIO_IDX_START_SW;
> +			port = CHV_IOSF_PORT_GPIO_SW;
> +		} else if (gpio_index >= CHV_GPIO_IDX_START_E) {
> +			gpio_index -= CHV_GPIO_IDX_START_E;
> +			port = CHV_IOSF_PORT_GPIO_E;
> +		} else {
> +			port = CHV_IOSF_PORT_GPIO_N;
> +		}
> +	} else {
> +		/* XXX: The spec is unclear about CHV GPIO on seq v2 */
> +		if (gpio_source != 0) {
> +			DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
> +			return;
> +		}
> +
> +		if (gpio_index >= CHV_GPIO_IDX_START_E) {
> +			DRM_DEBUG_KMS("invalid gpio index %u for GPIO N\n",
> +				      gpio_index);
> +			return;
> +		}
> +
> +		port = CHV_IOSF_PORT_GPIO_N;
> +	}
> +
> +	family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
> +	gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
> +
> +	cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
> +	cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
> +
> +	mutex_lock(&dev_priv->sb_lock);
> +	vlv_iosf_sb_write(dev_priv, port, cfg1, 0);
> +	vlv_iosf_sb_write(dev_priv, port, cfg0,
> +			  CHV_GPIO_GPIOCFG_GPO | CHV_GPIO_GPIOTXSTATE(value));
> +	mutex_unlock(&dev_priv->sb_lock);
> +}
> +
>  static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>  {
>  	struct drm_device *dev = intel_dsi->base.base.dev;
> @@ -255,6 +323,8 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>  
>  	if (IS_VALLEYVIEW(dev_priv))
>  		vlv_exec_gpio(dev_priv, gpio_source, gpio_index, value);
> +	else if (IS_CHERRYVIEW(dev_priv))
> +		chv_exec_gpio(dev_priv, gpio_source, gpio_index, value);
>  	else
>  		DRM_DEBUG_KMS("GPIO element not supported on this platform\n");
>  
> -- 
> 2.1.4

-- 
Ville Syrjälä
Intel OTC