[Intel-gfx] [PATCH v4 02/10] drm/i915: Unduplicate CHV signal level code
Ander Conselvan de Oliveira
ander.conselvan.de.oliveira at intel.com
Wed Apr 27 12:44:17 UTC 2016
The code for programming voltage swing and emphasis was duplicated
between DP and HDMI code. Move that to a new file, intel_dpio_phy.c.
v2: Keep the "Use 800mV-0dB" comment in the HDMI code. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
Reviewed-by: Jim Bride <jim.bride at linux.intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/i915_drv.h | 5 ++
drivers/gpu/drm/i915/intel_dp.c | 103 ++--------------------------
drivers/gpu/drm/i915/intel_dpio_phy.c | 122 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_hdmi.c | 70 +------------------
5 files changed, 136 insertions(+), 165 deletions(-)
create mode 100644 drivers/gpu/drm/i915/intel_dpio_phy.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 723c502..63c4d2b 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -59,6 +59,7 @@ i915-y += intel_audio.o \
intel_bios.o \
intel_color.o \
intel_display.o \
+ intel_dpio_phy.o \
intel_dpll_mgr.o \
intel_fbc.o \
intel_fifo_underrun.o \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 32f0597..9760b42 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3577,6 +3577,11 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg);
void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
+/* intel_dpio_phy.c */
+void chv_set_phy_signal_level(struct intel_encoder *encoder,
+ u32 deemph_reg_value, u32 margin_reg_value,
+ bool uniq_trans_scale);
+
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c12c414..bdafd72 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3276,23 +3276,12 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
return 0;
}
-static bool chv_need_uniq_trans_scale(uint8_t train_set)
-{
- return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 &&
- (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
-}
-
static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
- struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
- u32 deemph_reg_value, margin_reg_value, val;
+ struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+ u32 deemph_reg_value, margin_reg_value;
+ bool uniq_trans_scale = false;
uint8_t train_set = intel_dp->train_set[0];
- enum dpio_channel ch = vlv_dport_to_channel(dport);
- enum pipe pipe = intel_crtc->pipe;
- int i;
switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPH_LEVEL_0:
@@ -3312,7 +3301,7 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
deemph_reg_value = 128;
margin_reg_value = 154;
- /* FIXME extra to set for 1200 */
+ uniq_trans_scale = true;
break;
default:
return 0;
@@ -3364,88 +3353,8 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
return 0;
}
- mutex_lock(&dev_priv->sb_lock);
-
- /* Clear calc init */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
- val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
- val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
- val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
- if (intel_crtc->config->lane_count > 2) {
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
- val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
- val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
- val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
- }
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
- val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
- val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
-
- if (intel_crtc->config->lane_count > 2) {
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
- val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
- val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
- }
-
- /* Program swing deemph */
- for (i = 0; i < intel_crtc->config->lane_count; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
- val &= ~DPIO_SWING_DEEMPH9P5_MASK;
- val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
- }
-
- /* Program swing margin */
- for (i = 0; i < intel_crtc->config->lane_count; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-
- val &= ~DPIO_SWING_MARGIN000_MASK;
- val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
-
- /*
- * Supposedly this value shouldn't matter when unique transition
- * scale is disabled, but in fact it does matter. Let's just
- * always program the same value and hope it's OK.
- */
- val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
- val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
-
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
- }
-
- /*
- * The document said it needs to set bit 27 for ch0 and bit 26
- * for ch1. Might be a typo in the doc.
- * For now, for this unique transition scale selection, set bit
- * 27 for ch0 and ch1.
- */
- for (i = 0; i < intel_crtc->config->lane_count; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
- if (chv_need_uniq_trans_scale(train_set))
- val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
- else
- val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
- }
-
- /* Start swing calculation */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
- val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
- if (intel_crtc->config->lane_count > 2) {
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
- val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
- }
-
- mutex_unlock(&dev_priv->sb_lock);
+ chv_set_phy_signal_level(encoder, deemph_reg_value,
+ margin_reg_value, uniq_trans_scale);
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
new file mode 100644
index 0000000..cbe1703d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright © 2014-2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include "intel_drv.h"
+
+void chv_set_phy_signal_level(struct intel_encoder *encoder,
+ u32 deemph_reg_value, u32 margin_reg_value,
+ bool uniq_trans_scale)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
+ enum dpio_channel ch = vlv_dport_to_channel(dport);
+ enum pipe pipe = intel_crtc->pipe;
+ u32 val;
+ int i;
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* Clear calc init */
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
+ val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+ val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+ val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
+
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
+ val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+ val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+ val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+ }
+
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
+ val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+ val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
+
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+ val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+ val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+ }
+
+ /* Program swing deemph */
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
+ val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
+ val &= ~DPIO_SWING_DEEMPH9P5_MASK;
+ val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
+ vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
+ }
+
+ /* Program swing margin */
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
+ val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
+
+ val &= ~DPIO_SWING_MARGIN000_MASK;
+ val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
+
+ /*
+ * Supposedly this value shouldn't matter when unique transition
+ * scale is disabled, but in fact it does matter. Let's just
+ * always program the same value and hope it's OK.
+ */
+ val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
+ val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
+
+ vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
+ }
+
+ /*
+ * The document said it needs to set bit 27 for ch0 and bit 26
+ * for ch1. Might be a typo in the doc.
+ * For now, for this unique transition scale selection, set bit
+ * 27 for ch0 and ch1.
+ */
+ for (i = 0; i < intel_crtc->config->lane_count; i++) {
+ val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
+ if (uniq_trans_scale)
+ val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
+ else
+ val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
+ }
+
+ /* Start swing calculation */
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
+ val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
+
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
+ val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+ }
+
+ mutex_unlock(&dev_priv->sb_lock);
+
+}
+
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 718eba2..494e02e 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1921,77 +1921,11 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
/* Deassert data lane reset */
chv_data_lane_soft_reset(encoder, false);
- /* Clear calc init */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
- val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
- val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
- val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
- val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
- val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
- val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
- val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
- val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
- val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
- val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+ mutex_unlock(&dev_priv->sb_lock);
/* FIXME: Program the support xxx V-dB */
/* Use 800mV-0dB */
- for (i = 0; i < 4; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
- val &= ~DPIO_SWING_DEEMPH9P5_MASK;
- val |= 128 << DPIO_SWING_DEEMPH9P5_SHIFT;
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
- }
-
- for (i = 0; i < 4; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-
- val &= ~DPIO_SWING_MARGIN000_MASK;
- val |= 102 << DPIO_SWING_MARGIN000_SHIFT;
-
- /*
- * Supposedly this value shouldn't matter when unique transition
- * scale is disabled, but in fact it does matter. Let's just
- * always program the same value and hope it's OK.
- */
- val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
- val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
-
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
- }
-
- /*
- * The document said it needs to set bit 27 for ch0 and bit 26
- * for ch1. Might be a typo in the doc.
- * For now, for this unique transition scale selection, set bit
- * 27 for ch0 and ch1.
- */
- for (i = 0; i < 4; i++) {
- val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
- val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
- vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
- }
-
- /* Start swing calculation */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
- val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
- val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-
- mutex_unlock(&dev_priv->sb_lock);
+ chv_set_phy_signal_level(encoder, 128, 102, false);
intel_hdmi->set_infoframes(&encoder->base,
intel_crtc->config->has_hdmi_sink,
--
2.4.11
More information about the Intel-gfx
mailing list