[Intel-gfx] [PATCH v4 08/10] drm/i915: Unduplicate VLV phy pre pll enabling code

Ander Conselvan de Oliveira ander.conselvan.de.oliveira at intel.com
Wed Apr 27 12:44:23 UTC 2016


The code used by the DP and HDMI paths was very similar, so make them
share it. Note that this removes the write to signal level registers
from the HDMI pre pll enable path, but that's OK since those are set
in vlv_hdmi_pre_enable() function.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
Reviewed-by: Jim Bride <jim.bride at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h       |  1 +
 drivers/gpu/drm/i915/intel_dp.c       | 25 +------------------------
 drivers/gpu/drm/i915/intel_dpio_phy.c | 28 ++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_hdmi.c     | 28 +---------------------------
 4 files changed, 31 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8d07f84..8a8a76d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3591,6 +3591,7 @@ void chv_phy_post_pll_disable(struct intel_encoder *encoder);
 void vlv_set_phy_signal_level(struct intel_encoder *encoder,
 			      u32 demph_reg_value, u32 preemph_reg_value,
 			      u32 uniqtranscale_reg_value, u32 tx3_demph);
+void vlv_phy_pre_pll_enable(struct intel_encoder *encoder);
 
 int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
 int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6b953b3..bb26caf 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2791,32 +2791,9 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
 
 static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
 {
-	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(encoder->base.crtc);
-	enum dpio_channel port = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
-
 	intel_dp_prepare(encoder);
 
-	/* Program Tx lane resets to default */
-	mutex_lock(&dev_priv->sb_lock);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
-			 DPIO_PCS_TX_LANE2_RESET |
-			 DPIO_PCS_TX_LANE1_RESET);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
-			 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
-			 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
-			 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
-				 DPIO_PCS_CLK_SOFT_RESET);
-
-	/* Fix up inter-pair skew failure */
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
-	mutex_unlock(&dev_priv->sb_lock);
+	vlv_phy_pre_pll_enable(encoder);
 }
 
 static void chv_pre_enable_dp(struct intel_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
index 8fb4fda..975965a 100644
--- a/drivers/gpu/drm/i915/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -395,3 +395,31 @@ void vlv_set_phy_signal_level(struct intel_encoder *encoder,
 	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
 	mutex_unlock(&dev_priv->sb_lock);
 }
+
+void vlv_phy_pre_pll_enable(struct intel_encoder *encoder)
+{
+	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+	struct drm_device *dev = encoder->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(encoder->base.crtc);
+	enum dpio_channel port = vlv_dport_to_channel(dport);
+	int pipe = intel_crtc->pipe;
+
+	/* Program Tx lane resets to default */
+	mutex_lock(&dev_priv->sb_lock);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
+			 DPIO_PCS_TX_LANE2_RESET |
+			 DPIO_PCS_TX_LANE1_RESET);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
+			 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
+			 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
+			 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
+				 DPIO_PCS_CLK_SOFT_RESET);
+
+	/* Fix up inter-pair skew failure */
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
+	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
+	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
+	mutex_unlock(&dev_priv->sb_lock);
+}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 5c044ce..1a58ba7 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1629,35 +1629,9 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
 
 static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
 {
-	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(encoder->base.crtc);
-	enum dpio_channel port = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
-
 	intel_hdmi_prepare(encoder);
 
-	/* Program Tx lane resets to default */
-	mutex_lock(&dev_priv->sb_lock);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
-			 DPIO_PCS_TX_LANE2_RESET |
-			 DPIO_PCS_TX_LANE1_RESET);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
-			 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
-			 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
-			 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
-			 DPIO_PCS_CLK_SOFT_RESET);
-
-	/* Fix up inter-pair skew failure */
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
-
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
-	mutex_unlock(&dev_priv->sb_lock);
+	vlv_phy_pre_pll_enable(encoder);
 }
 
 static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
-- 
2.4.11



More information about the Intel-gfx mailing list