[Intel-gfx] [PATCH] drm/i915: Update RAWCLK_FREQ register on VLV/CHV

Ville Syrjälä ville.syrjala at linux.intel.com
Wed Apr 27 16:08:46 UTC 2016


On Wed, Apr 27, 2016 at 03:54:12PM +0000, Vivi, Rodrigo wrote:
> On Wed, 2016-04-27 at 17:43 +0300, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > 
> > I just noticed that VLV/CHV have a RAWCLK_FREQ register just like PCH
> > platforms. It lives in the display power well, so we should update it
> > when enabling the power well.
> > 
> > Interestingly the BIOS seems to leave it at the reset value (125)
> > which
> > doesn't match the rawclk frequency on VLV/CHV (200 MHz). As always
> > with
> > these register, the spec is extremely vague what the register does.
> > All
> > it says is: "This is used to generate a divided down clock for
> > miscellaneous timers in display." Based on a quick test, at least AUX
> > and PWM appear to be unaffected by this.
> > 
> > But since the register is there, let's configure it in accordance
> > with
> > the spec.
> > 
> > Note that we have to move intel_update_rawclk() to occur before we
> > touch the power wells, so that the dev_priv->rawclk_freq is already
> > populated when the disp2 enable hook gets called for the first time.
> > I think this should be safe to do on other platforms as well.
> > 
> > Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_dma.c         | 3 +++
> >  drivers/gpu/drm/i915/i915_reg.h         | 2 ++
> >  drivers/gpu/drm/i915/intel_display.c    | 4 ++--
> >  drivers/gpu/drm/i915/intel_drv.h        | 1 +
> >  drivers/gpu/drm/i915/intel_runtime_pm.c | 5 +++++
> >  5 files changed, 13 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_dma.c
> > b/drivers/gpu/drm/i915/i915_dma.c
> > index 5c7615041b31..fd1260d2b6ec 100644
> > --- a/drivers/gpu/drm/i915/i915_dma.c
> > +++ b/drivers/gpu/drm/i915/i915_dma.c
> > @@ -454,6 +454,9 @@ static int i915_load_modeset_init(struct
> > drm_device *dev)
> >  	if (ret)
> >  		goto cleanup_vga_client;
> >  
> > +	/* must happen before intel_power_domains_init_hw() on
> > VLV/CHV */
> > +	intel_update_rawclk(dev_priv);
> 
> separated patches since this affects all platforms?!

I was going to do that originally, but then I thought that if we have to
revert due to some other platform, it's likely VLV/CHV would be
forgotten and only later someone would start to complain about the
WARN_ON() I added. So if this change needs to reverted, the VLV/CHV stuff
needs to be redone anyway, so having it in the same commit seems like
the slightly better option to me.

> 
> anyways I checked CHV spec here so feel free to ignore me and use
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> 
> 
> > +
> >  	intel_power_domains_init_hw(dev_priv, false);
> >  
> >  	intel_csr_ucode_init(dev_priv);
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index 25e229b609a7..0a2fd3000f94 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -2449,6 +2449,8 @@ enum skl_disp_power_wells {
> >  #define   DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
> >  #define   DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
> >  
> > +#define RAWCLK_FREQ_VLV		_MMIO(VLV_DISPLAY_BASE +
> > 0x6024)
> > +
> >  #define _FPA0	0x6040
> >  #define _FPA1	0x6044
> >  #define _FPB0	0x6048
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index b7cb632a2a31..eb7cb9431209 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -185,6 +185,7 @@ intel_pch_rawclk(struct drm_i915_private
> > *dev_priv)
> >  static int
> >  intel_vlv_hrawclk(struct drm_i915_private *dev_priv)
> >  {
> > +	/* RAWCLK_FREQ_VLV register updated from power well code */
> >  	return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
> >  				     
> >  CCK_DISPLAY_REF_CLOCK_CONTROL);
> >  }
> > @@ -218,7 +219,7 @@ intel_g4x_hrawclk(struct drm_i915_private
> > *dev_priv)
> >  	}
> >  }
> >  
> > -static void intel_update_rawclk(struct drm_i915_private *dev_priv)
> > +void intel_update_rawclk(struct drm_i915_private *dev_priv)
> >  {
> >  	if (HAS_PCH_SPLIT(dev_priv))
> >  		dev_priv->rawclk_freq = intel_pch_rawclk(dev_priv);
> > @@ -15455,7 +15456,6 @@ void intel_modeset_init(struct drm_device
> > *dev)
> >  	}
> >  
> >  	intel_update_czclk(dev_priv);
> > -	intel_update_rawclk(dev_priv);
> >  	intel_update_cdclk(dev);
> >  
> >  	intel_shared_dpll_init(dev);
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index cb89a35a6755..ce78afefe3cd 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1110,6 +1110,7 @@ void i915_audio_component_init(struct
> > drm_i915_private *dev_priv);
> >  void i915_audio_component_cleanup(struct drm_i915_private
> > *dev_priv);
> >  
> >  /* intel_display.c */
> > +void intel_update_rawclk(struct drm_i915_private *dev_priv);
> >  int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
> >  		      const char *name, u32 reg, int ref_freq);
> >  extern const struct drm_plane_funcs intel_plane_funcs;
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index 7fb1da4e7fc3..b69b935516fb 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -948,6 +948,11 @@ static void vlv_init_display_clock_gating(struct
> > drm_i915_private *dev_priv)
> >  	 */
> >  	I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
> >  	I915_WRITE(CBR1_VLV, 0);
> > +
> > +	WARN_ON(dev_priv->rawclk_freq == 0);
> > +
> > +	I915_WRITE(RAWCLK_FREQ_VLV,
> > +		   DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 1000));
> >  }
> >  
> >  static void vlv_display_power_well_init(struct drm_i915_private
> > *dev_priv)

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list