[Intel-gfx] [PATCH 3/5] drm/i915: Fixes to support the DP Compliance EDID tests.

Manasi Navare manasi.d.navare at intel.com
Sat Apr 30 01:28:13 UTC 2016


This patch addresses a few issues from the original patch for
DP Compliance EDID test support submitted by
Todd Previte<todd.previte at gmail.com>

Video Mode requested in the EDID test handler for the EDID Read
test (CTS 4.2.2.3) should be set to PREFERRED as per the CTS spec.
Intel connector status should be connected even if detect_edid is
NULL when compliance_test flag is set. This is required to handle
the corrupt EDID (CTS 4.2.2.6) or EDID Read Failure I2C NACK/I2C
DEFER (CTS 4.2.2.4 and 4.2.2.5) tests from CTS spec.

Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0961f22..456fc17 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4023,7 +4023,7 @@ static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 
 static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 {
-	uint8_t test_result = DP_TEST_NAK;
+	uint8_t test_result = DP_TEST_ACK;
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	struct drm_connector *connector = &intel_connector->base;
 
@@ -4058,7 +4058,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
 
 		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
-		intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_STANDARD;
+		intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_PREFERRED;
 	}
 
 	/* Set test active flag here so userspace doesn't interrupt things */
@@ -4650,7 +4650,7 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 
 	intel_dp->detect_done = false;
 
-	if (intel_connector->detect_edid)
+	if (intel_connector->detect_edid || intel_dp->compliance_test_active)
 		return connector_status_connected;
 	else
 		return connector_status_disconnected;
-- 
1.9.1



More information about the Intel-gfx mailing list