[Intel-gfx] [PATCH 13/73] drm/i915: Move the modulus for ring emission to the register write
Chris Wilson
chris at chris-wilson.co.uk
Mon Aug 1 09:10:21 UTC 2016
Space reservation is already safe with respect to the ring->size
modulus, but hardware only expects to see values in the range
0...ring->size-1 (inclusive) and so requires the modulus to prevent us
writing the value ring->size instead of 0. As this is only required for
the register itself, we can defer the modulus to the register update and
not perform it after every command packet. We keep the
intel_ring_advance() around in the code to provide demarcation for the
end-of-packet (which then can be compared against intel_ring_begin() as
the number of dwords emitted must match the reserved space).
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Cc: Dave Gordon <david.s.gordon at intel.com>
---
drivers/gpu/drm/i915/intel_lrc.c | 2 +-
drivers/gpu/drm/i915/intel_ringbuffer.c | 6 ++++--
drivers/gpu/drm/i915/intel_ringbuffer.h | 17 +++++++++++++----
3 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index bf42a66d6624..824f7efe4e64 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -373,7 +373,7 @@ static void execlists_update_context(struct drm_i915_gem_request *rq)
struct i915_hw_ppgtt *ppgtt = rq->ctx->ppgtt;
uint32_t *reg_state = rq->ctx->engine[engine->id].lrc_reg_state;
- reg_state[CTX_RING_TAIL+1] = rq->tail;
+ reg_state[CTX_RING_TAIL+1] = intel_ring_offset(rq->ring, rq->tail);
/* True 32b PPGTT with dynamic page allocation: update PDP
* registers and point the unallocated PDPs to scratch page.
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 3142085b5cc0..21d5e8209400 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1718,7 +1718,8 @@ static void i9xx_submit_request(struct drm_i915_gem_request *request)
{
struct drm_i915_private *dev_priv = request->i915;
- I915_WRITE_TAIL(request->engine, request->tail);
+ I915_WRITE_TAIL(request->engine,
+ intel_ring_offset(request->ring, request->tail));
}
static void
@@ -2505,7 +2506,8 @@ static void gen6_bsd_submit_request(struct drm_i915_gem_request *request)
DRM_ERROR("timed out waiting for the BSD ring to wake up\n");
/* Now that the ring is fully powered up, update the tail */
- I915_WRITE_FW(RING_TAIL(request->engine->mmio_base), request->tail);
+ I915_WRITE_FW(RING_TAIL(request->engine->mmio_base),
+ intel_ring_offset(request->ring, request->tail));
POSTING_READ_FW(RING_TAIL(request->engine->mmio_base));
/* Let the ring send IDLE messages to the GT again,
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 14d2ea36fb88..9ac96ddb01ee 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -460,14 +460,23 @@ static inline void intel_ring_emit_reg(struct intel_ring *ring, i915_reg_t reg)
static inline void intel_ring_advance(struct intel_ring *ring)
{
+ /* Dummy function.
+ *
+ * This serves as a placeholder in the code so that the reader
+ * can compare against the preceding intel_ring_begin() and
+ * check that the number of dwords emitted matches the space
+ * reserved for the command packet (i.e. the value passed to
+ * intel_ring_begin()).
+ */
+}
+
+static inline u32 intel_ring_offset(struct intel_ring *ring, u32 value)
+{
/* The modulus is required so that we avoid writing
* request->tail == ring->size, rather than the expected 0,
* into the RING_TAIL register as that can cause a GPU hang.
- * As this is only strictly required for the request->tail,
- * and only then as we write the value into hardware, we can
- * one day remove the modulus after every command packet.
*/
- ring->tail &= ring->size - 1;
+ return value & (ring->size - 1);
}
int __intel_ring_space(int head, int tail, int size);
--
2.8.1
More information about the Intel-gfx
mailing list