[Intel-gfx] [PATCH 8/9] drm/mediatek: Use drm_plane_helper_check_state()

Bibby Hsieh bibby.hsieh at mediatek.com
Tue Aug 2 05:31:40 UTC 2016


On Tue, 2016-07-26 at 19:07 +0300, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Replace the use of drm_plane_helper_check_update() with
> drm_plane_helper_check_state() since we have a plane state.
> 
> This also eliminates the double clipping the driver was doing
> in both check and commit phases). And it should fix src coordinate
> addr adjustement. Previously the driver was expecting negative dst
> coordinates after clipping, which is not going happen, so any clipping
> induced addr adjustment simply didn't happen. Neither did the driver
> respect any user configured src coordinates, so panning and such would
> have been totally broken. It should be all good now.
> 
> Cc: CK Hu <ck.hu at mediatek.com>
> Cc: linux-mediatek at lists.infradead.org
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

This patch looks fine to me, thanks for your patch.

Reviewed-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
Tested-by: Bibby Hsieh <bibby.hsieh at mediatek.com>

> ---
>  drivers/gpu/drm/mediatek/mtk_drm_plane.c | 72 +++++++++-----------------------
>  1 file changed, 20 insertions(+), 52 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_plane.c b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> index 3995765a90dc..5f2516fca079 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_plane.c
> @@ -30,15 +30,20 @@ static const u32 formats[] = {
>  	DRM_FORMAT_RGB565,
>  };
>  
> -static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane, bool enable,
> -			     dma_addr_t addr, struct drm_rect *dest)
> +static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane,
> +			     dma_addr_t addr)
>  {
>  	struct drm_plane *plane = &mtk_plane->base;
>  	struct mtk_plane_state *state = to_mtk_plane_state(plane->state);
>  	unsigned int pitch, format;
> -	int x, y;
> +	bool enable;
>  
> -	if (WARN_ON(!plane->state || (enable && !plane->state->fb)))
> +	if (WARN_ON(!plane->state))
> +		return;
> +
> +	enable = state->base.visible;
> +
> +	if (WARN_ON(enable && !plane->state->fb))
>  		return;
>  
>  	if (plane->state->fb) {
> @@ -49,27 +54,17 @@ static void mtk_plane_enable(struct mtk_drm_plane *mtk_plane, bool enable,
>  		format = DRM_FORMAT_RGBA8888;
>  	}
>  
> -	x = plane->state->crtc_x;
> -	y = plane->state->crtc_y;
> -
> -	if (x < 0) {
> -		addr -= x * 4;
> -		x = 0;
> -	}
> -
> -	if (y < 0) {
> -		addr -= y * pitch;
> -		y = 0;
> -	}
> +	addr += (state->base.src.x1 >> 16) * 4;
> +	addr += (state->base.src.y1 >> 16) * pitch;
>  
>  	state->pending.enable = enable;
>  	state->pending.pitch = pitch;
>  	state->pending.format = format;
>  	state->pending.addr = addr;
> -	state->pending.x = x;
> -	state->pending.y = y;
> -	state->pending.width = dest->x2 - dest->x1;
> -	state->pending.height = dest->y2 - dest->y1;
> +	state->pending.x = state->base.dst.x1;
> +	state->pending.y = state->base.dst.y1;
> +	state->pending.width = drm_rect_width(&state->base.dst);
> +	state->pending.height = drm_rect_height(&state->base.dst);
>  	wmb(); /* Make sure the above parameters are set before update */
>  	state->pending.dirty = true;
>  }
> @@ -134,20 +129,6 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
>  {
>  	struct drm_framebuffer *fb = state->fb;
>  	struct drm_crtc_state *crtc_state;
> -	bool visible;
> -	struct drm_rect dest = {
> -		.x1 = state->crtc_x,
> -		.y1 = state->crtc_y,
> -		.x2 = state->crtc_x + state->crtc_w,
> -		.y2 = state->crtc_y + state->crtc_h,
> -	};
> -	struct drm_rect src = {
> -		/* 16.16 fixed point */
> -		.x1 = state->src_x,
> -		.y1 = state->src_y,
> -		.x2 = state->src_x + state->src_w,
> -		.y2 = state->src_y + state->src_h,
> -	};
>  	struct drm_rect clip = { 0, };
>  
>  	if (!fb)
> @@ -168,12 +149,10 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
>  	clip.x2 = crtc_state->mode.hdisplay;
>  	clip.y2 = crtc_state->mode.vdisplay;
>  
> -	return drm_plane_helper_check_update(plane, state->crtc, fb,
> -					     &src, &dest, &clip,
> -					     state->rotation,
> -					     DRM_PLANE_HELPER_NO_SCALING,
> -					     DRM_PLANE_HELPER_NO_SCALING,
> -					     true, true, &visible);
> +	return drm_plane_helper_check_state(state, &clip,
> +					    DRM_PLANE_HELPER_NO_SCALING,
> +					    DRM_PLANE_HELPER_NO_SCALING,
> +					    true, true);
>  }
>  
>  static void mtk_plane_atomic_update(struct drm_plane *plane,
> @@ -184,24 +163,13 @@ static void mtk_plane_atomic_update(struct drm_plane *plane,
>  	struct drm_gem_object *gem;
>  	struct mtk_drm_gem_obj *mtk_gem;
>  	struct mtk_drm_plane *mtk_plane = to_mtk_plane(plane);
> -	struct drm_rect dest = {
> -		.x1 = state->base.crtc_x,
> -		.y1 = state->base.crtc_y,
> -		.x2 = state->base.crtc_x + state->base.crtc_w,
> -		.y2 = state->base.crtc_y + state->base.crtc_h,
> -	};
> -	struct drm_rect clip = { 0, };
>  
>  	if (!crtc)
>  		return;
>  
> -	clip.x2 = state->base.crtc->state->mode.hdisplay;
> -	clip.y2 = state->base.crtc->state->mode.vdisplay;
> -	drm_rect_intersect(&dest, &clip);
> -
>  	gem = mtk_fb_get_gem_obj(state->base.fb);
>  	mtk_gem = to_mtk_gem_obj(gem);
> -	mtk_plane_enable(mtk_plane, true, mtk_gem->dma_addr, &dest);
> +	mtk_plane_enable(mtk_plane, mtk_gem->dma_addr);
>  }
>  
>  static void mtk_plane_atomic_disable(struct drm_plane *plane,

-- 
Bibby



More information about the Intel-gfx mailing list