[Intel-gfx] [PATCH] drm/i915: set proper N/M in modeset
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Aug 2 10:47:15 UTC 2016
On Tue, Aug 02, 2016 at 09:35:10AM +0800, libin.yang at linux.intel.com wrote:
> From: Libin Yang <libin.yang at linux.intel.com>
>
> When modeset occurs and the LS_CLK is set to some
> special values in DP mode, the N/M need to be set
> manually if audio is playing.
>
> The relationship of Maud and Naud is expressed in
> the following equation:
> Maud/Naud = 512 * fs / f_LS_Clk
>
> Please refer VESA DisplayPort Standard spec for details.
>
> Also, the patch applies
> commit 7e8275c2f2bb ("drm/i915: set proper N/CTS in modeset")
> to APL platform.
>
> Signed-off-by: Libin Yang <libin.yang at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 6 ++
> drivers/gpu/drm/i915/intel_audio.c | 122 +++++++++++++++++++++++++++++++------
> 2 files changed, 111 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 8bfde75..2f9d00e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7351,6 +7351,12 @@ enum {
> #define _HSW_AUD_CONFIG_B 0x65100
> #define HSW_AUD_CFG(pipe) _MMIO_PIPE(pipe, _HSW_AUD_CONFIG_A, _HSW_AUD_CONFIG_B)
>
> +#define _HSW_AUD_M_CTS_ENABLE_A 0x65028
> +#define _HSW_AUD_M_CTS_ENABLE_B 0x65128
> +#define HSW_AUD_M_CTS_ENABLE(pipe) _MMIO_PIPE(pipe, _HSW_AUD_M_CTS_ENABLE_A, _HSW_AUD_M_CTS_ENABLE_B)
> +#define AUD_M_CTS_M_VALUE_INDEX (1 << 21)
> +#define AUD_M_CTS_M_PROG_ENABLE (1 << 20)
> +
> #define _HSW_AUD_MISC_CTRL_A 0x65010
> #define _HSW_AUD_MISC_CTRL_B 0x65110
> #define HSW_AUD_MISC_CTRL(pipe) _MMIO_PIPE(pipe, _HSW_AUD_MISC_CTRL_A, _HSW_AUD_MISC_CTRL_B)
> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> index 6700a7b..de55ecf 100644
> --- a/drivers/gpu/drm/i915/intel_audio.c
> +++ b/drivers/gpu/drm/i915/intel_audio.c
> @@ -98,6 +98,22 @@ static const struct {
> { 192000, TMDS_297M, 20480, 247500 },
> };
>
> +#define LC_540M 540000
> +#define LC_162M 162000
Do we have some explanation why 2.7 doesn't need M/N programming,
but 1.62 and 5.4 do?
And I see you're only doing this on HSW+. Earlier platforms don't need
this?
> +static const struct {
> + int sample_rate;
> + int clock;
> + int n;
> + int m;
Can save a bit of space by using u16 for m and n.
> +} aud_nm[] = {
> + {48000, LC_540M, 5625, 256},`
> + {44100, LC_540M, 9375, 392},
> + {32000, LC_540M, 16875, 512},
> + {48000, LC_162M, 3375, 512},
> + {44100, LC_162M, 5625, 784},
> + {32000, LC_162M, 10125, 1024
> +};
The numbers look good, but what about other sample rates? For HDMI we go
up to 192kHz, why not for DP?
> +
> /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
> static u32 audio_config_hdmi_pixel_clock(const struct drm_display_mode *adjusted_mode)
> {
> @@ -121,20 +137,50 @@ static u32 audio_config_hdmi_pixel_clock(const struct drm_display_mode *adjusted
> return hdmi_audio_clock[i].config;
> }
>
> -static int audio_config_get_n(const struct drm_display_mode *mode, int rate)
> +static int audio_config_get_n(struct intel_crtc *crtc,
> + const struct drm_display_mode *adjusted_mode,
> + int rate)
> +{
> + int i;
> +
> + if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI)) {
> + for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
> + if ((rate == aud_ncts[i].sample_rate) &&
> + (adjusted_mode->clock == aud_ncts[i].clock)) {
> + return aud_ncts[i].n;
> + }
> + }
> + }
> +
> + if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP)) {
> + for (i = 0; i < ARRAY_SIZE(aud_nm); i++) {
> + if ((rate == aud_nm[i].sample_rate) &&
> + (crtc->config->port_clock == aud_nm[i].clock)) {
> + return aud_nm[i].n;
> + }
> + }
> + }
> + return 0;
> +}
> +
> +static int audio_config_get_m(struct intel_crtc *crtc, int rate)
> {
> int i;
>
> - for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
> - if ((rate == aud_ncts[i].sample_rate) &&
> - (mode->clock == aud_ncts[i].clock)) {
> - return aud_ncts[i].n;
> + if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP)) {
> + for (i = 0; i < ARRAY_SIZE(aud_nm); i++) {
> + if ((rate == aud_nm[i].sample_rate) &&
> + (crtc->config->port_clock == aud_nm[i].clock)) {
> + return aud_nm[i].m;
> + }
> }
> }
> +
> return 0;
> }
>
> -static uint32_t audio_config_setup_n_reg(int n, uint32_t val)
> +static uint32_t audio_config_setup_n_reg(struct intel_crtc *crtc,
> + int n, uint32_t val)
> {
> int n_low, n_up;
> uint32_t tmp = val;
> @@ -145,17 +191,38 @@ static uint32_t audio_config_setup_n_reg(int n, uint32_t val)
> tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
> (n_low << AUD_CONFIG_LOWER_N_SHIFT) |
> AUD_CONFIG_N_PROG_ENABLE);
> + if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP))
> + tmp |= AUD_CONFIG_N_VALUE_INDEX;
> + return tmp;
> +}
> +
> +static uint32_t audio_config_setup_m_reg(struct intel_crtc *crtc,
> + int m, uint32_t val)
> +{
> + uint32_t tmp = val;
> +
> + if (!intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP))
> + return 0;
> +
> + tmp |= m;
> + tmp |= AUD_M_CTS_M_VALUE_INDEX;
> + tmp |= AUD_M_CTS_M_PROG_ENABLE;
> +
> return tmp;
> }
>
> /* check whether N/CTS/M need be set manually */
> static bool audio_rate_need_prog(struct intel_crtc *crtc,
> - const struct drm_display_mode *mode)
> + const struct drm_display_mode *adjusted_mode)
> {
> - if (((mode->clock == TMDS_297M) ||
> - (mode->clock == TMDS_296M)) &&
> + if (((adjusted_mode->clock == TMDS_297M) ||
> + (adjusted_mode->clock == TMDS_296M)) &&
> intel_crtc_has_type(crtc->config, INTEL_OUTPUT_HDMI))
> return true;
> + else if (((crtc->config->port_clock == LC_540M) ||
> + (crtc->config->port_clock == LC_162M)) &&
> + intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP))
> + return true;
> else
> return false;
> }
> @@ -287,7 +354,7 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> struct intel_digital_port *intel_dig_port =
> enc_to_dig_port(&encoder->base);
> enum port port = intel_dig_port->port;
> - uint32_t tmp;
> + uint32_t tmp, m;
> int len, i;
> int n, rate;
>
> @@ -343,15 +410,25 @@ static void hsw_audio_codec_enable(struct drm_connector *connector,
> DRM_ERROR("invalid port: %d\n", port);
> rate = 0;
> }
> - n = audio_config_get_n(adjusted_mode, rate);
> + n = audio_config_get_n(intel_crtc, adjusted_mode, rate);
> if (n != 0)
> - tmp = audio_config_setup_n_reg(n, tmp);
> + tmp = audio_config_setup_n_reg(intel_crtc, n, tmp);
> else
> DRM_DEBUG_KMS("no suitable N value is found\n");
> }
>
> I915_WRITE(HSW_AUD_CFG(pipe), tmp);
>
> + /* setup m value for DP */
> + if (intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DP)) {
> + m = audio_config_get_m(intel_crtc, rate);
> + if (m != 0) {
> + tmp = I915_READ(HSW_AUD_M_CTS_ENABLE(pipe));
> + tmp = audio_config_setup_m_reg(intel_crtc, m, tmp);
> + I915_WRITE(HSW_AUD_M_CTS_ENABLE(pipe), tmp);
> + }
> + }
> +
> mutex_unlock(&dev_priv->av_mutex);
> }
>
> @@ -637,7 +714,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> struct drm_display_mode *mode;
> struct i915_audio_component *acomp = dev_priv->audio_component;
> enum pipe pipe = INVALID_PIPE;
> - u32 tmp;
> + u32 tmp, m;
> int n;
> int err = 0;
>
> @@ -645,7 +722,8 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> if (!IS_SKYLAKE(dev_priv) &&
> !IS_KABYLAKE(dev_priv) &&
> !IS_BROADWELL(dev_priv) &&
> - !IS_HASWELL(dev_priv))
> + !IS_HASWELL(dev_priv) &&
> + !IS_BROXTON(dev_priv))
> return 0;
HAS_DDI perhaps?
>
> mutex_lock(&dev_priv->av_mutex);
> @@ -653,7 +731,8 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> intel_encoder = dev_priv->dig_port_map[port];
> /* intel_encoder might be NULL for DP MST */
> if (!intel_encoder || !intel_encoder->base.crtc ||
> - intel_encoder->type != INTEL_OUTPUT_HDMI) {
> + ((intel_encoder->type != INTEL_OUTPUT_HDMI) &&
> + (intel_encoder->type != INTEL_OUTPUT_DP))) {
> DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
> err = -ENODEV;
> goto unlock;
> @@ -681,7 +760,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> goto unlock;
> }
>
> - n = audio_config_get_n(mode, rate);
> + n = audio_config_get_n(crtc, mode, rate);
> if (n == 0) {
> DRM_DEBUG_KMS("Using automatic mode for N value on port %c\n",
> port_name(port));
> @@ -693,8 +772,17 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
>
> /* 3. set the N/CTS/M */
> tmp = I915_READ(HSW_AUD_CFG(pipe));
> - tmp = audio_config_setup_n_reg(n, tmp);
> + tmp = audio_config_setup_n_reg(crtc, n, tmp);
> I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> + /* setup m value for DP */
> + if (intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP)) {
> + m = audio_config_get_m(crtc, rate);
> + if (m == 0)
> + goto unlock;
> + tmp = I915_READ(HSW_AUD_M_CTS_ENABLE(pipe));
> + tmp = audio_config_setup_m_reg(crtc, m, tmp);
> + I915_WRITE(HSW_AUD_M_CTS_ENABLE(pipe), tmp);
> + }
>
> unlock:
> mutex_unlock(&dev_priv->av_mutex);
> --
> 1.9.1
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list