[Intel-gfx] [PATCH 1/6] drm/i915: Merge the PPS register definitions
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Aug 9 11:53:09 UTC 2016
On Tue, Aug 09, 2016 at 02:34:07PM +0300, Imre Deak wrote:
> The PPS registers are pretty much the same everywhere, the differences
> being:
> - Register fields appearing, disappearing from one platform to the
> next: panel-reset-on-powerdown, backlight-on, panel-port,
> register-unlock
> - Different register base addresses
> - Different number of PPS instances: 2 on VLV/CHV/BXT, 1 everywhere
> else.
>
> We can merge the separate set of PPS definitions by extending the PPS
> instance argument to all platforms and using instance 0 on platforms
> with a single instance. This means we'll need to calculate the register
> addresses dynamically based on the given platform and PPS instance.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 2 +
> drivers/gpu/drm/i915/i915_reg.h | 145 ++++++++++++++---------------------
> drivers/gpu/drm/i915/i915_suspend.c | 30 +++-----
> drivers/gpu/drm/i915/intel_display.c | 22 ++++--
> drivers/gpu/drm/i915/intel_dp.c | 47 +++++-------
> drivers/gpu/drm/i915/intel_lvds.c | 43 +++--------
> 6 files changed, 119 insertions(+), 170 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index c36d176..fddaec6 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1749,6 +1749,8 @@ struct drm_i915_private {
>
> uint32_t psr_mmio_base;
>
> + uint32_t pps_mmio_base;
> +
> wait_queue_head_t gmbus_wait_queue;
>
> struct pci_dev *bridge_dev;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index f38a5e2..b65fe50 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3660,8 +3660,17 @@ enum {
> #define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0)
>
> /* Panel power sequencing */
> -#define PP_STATUS _MMIO(0x61200)
> -#define PP_ON (1 << 31)
> +#define PPS_BASE 0x61200
> +#define VLV_PPS_BASE (VLV_DISPLAY_BASE + PPS_BASE)
> +#define PCH_PPS_BASE 0xC7200
> +
> +#define _MMIO_PPS(pps_idx, reg) _MMIO(dev_priv->pps_mmio_base - \
> + PPS_BASE + (reg) + \
> + (pps_idx) * 0x100)
> +
> +#define _PP_STATUS 0x61200
> +#define PP_STATUS(pps_idx) _MMIO_PPS(pps_idx, _PP_STATUS)
> +#define PP_ON (1 << 31)
> /*
> * Indicates that all dependencies of the panel are on:
> *
> @@ -3669,14 +3678,14 @@ enum {
> * - pipe enabled
> * - LVDS/DVOB/DVOC on
> */
> -#define PP_READY (1 << 30)
> -#define PP_SEQUENCE_NONE (0 << 28)
> -#define PP_SEQUENCE_POWER_UP (1 << 28)
> -#define PP_SEQUENCE_POWER_DOWN (2 << 28)
> -#define PP_SEQUENCE_MASK (3 << 28)
> -#define PP_SEQUENCE_SHIFT 28
> -#define PP_CYCLE_DELAY_ACTIVE (1 << 27)
> -#define PP_SEQUENCE_STATE_MASK 0x0000000f
> +#define PP_READY (1 << 30)
> +#define PP_SEQUENCE_NONE (0 << 28)
> +#define PP_SEQUENCE_POWER_UP (1 << 28)
> +#define PP_SEQUENCE_POWER_DOWN (2 << 28)
> +#define PP_SEQUENCE_MASK (3 << 28)
> +#define PP_SEQUENCE_SHIFT 28
> +#define PP_CYCLE_DELAY_ACTIVE (1 << 27)
> +#define PP_SEQUENCE_STATE_MASK 0x0000000f
> #define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0)
> #define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0)
> #define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0)
> @@ -3686,11 +3695,46 @@ enum {
> #define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0)
> #define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0)
> #define PP_SEQUENCE_STATE_RESET (0xf << 0)
> -#define PP_CONTROL _MMIO(0x61204)
> -#define POWER_TARGET_ON (1 << 0)
> -#define PP_ON_DELAYS _MMIO(0x61208)
> -#define PP_OFF_DELAYS _MMIO(0x6120c)
> -#define PP_DIVISOR _MMIO(0x61210)
> +
> +#define _PP_CONTROL 0x61204
> +#define PP_CONTROL(pps_idx) _MMIO_PPS(pps_idx, _PP_CONTROL)
> +#define PANEL_UNLOCK_REGS (0xabcd << 16)
> +#define PANEL_UNLOCK_MASK (0xffff << 16)
> +#define BXT_POWER_CYCLE_DELAY_MASK 0x1f0
> +#define BXT_POWER_CYCLE_DELAY_SHIFT 4
> +#define EDP_FORCE_VDD (1 << 3)
> +#define EDP_BLC_ENABLE (1 << 2)
> +#define PANEL_POWER_RESET (1 << 1)
> +#define PANEL_POWER_OFF (0 << 0)
> +#define PANEL_POWER_ON (1 << 0)
> +#define POWER_TARGET_ON (1 << 0)
> +
> +#define _PP_ON_DELAYS 0x61208
> +#define PP_ON_DELAYS(pps_idx) _MMIO_PPS(pps_idx, _PP_ON_DELAYS)
> +#define PANEL_PORT_SELECT_MASK (3 << 30)
> +#define PANEL_PORT_SELECT_LVDS (0 << 30)
> +#define PANEL_PORT_SELECT_DPA (1 << 30)
> +#define PANEL_PORT_SELECT_DPC (2 << 30)
> +#define PANEL_PORT_SELECT_DPD (3 << 30)
> +#define PANEL_PORT_SELECT_VLV(port) ((port) << 30)
> +#define PANEL_POWER_UP_DELAY_MASK 0x1fff0000
> +#define PANEL_POWER_UP_DELAY_SHIFT 16
> +#define PANEL_LIGHT_ON_DELAY_MASK 0x1fff
> +#define PANEL_LIGHT_ON_DELAY_SHIFT 0
> +
> +#define _PP_OFF_DELAYS 0x6120C
> +#define PP_OFF_DELAYS(pps_idx) _MMIO_PPS(pps_idx, _PP_OFF_DELAYS)
> +#define PANEL_POWER_DOWN_DELAY_MASK 0x1fff0000
> +#define PANEL_POWER_DOWN_DELAY_SHIFT 16
> +#define PANEL_LIGHT_OFF_DELAY_MASK 0x1fff
> +#define PANEL_LIGHT_OFF_DELAY_SHIFT 0
> +
> +#define _PP_DIVISOR 0x61210
> +#define PP_DIVISOR(pps_idx) _MMIO_PPS(pps_idx, _PP_DIVISOR)
> +#define PP_REFERENCE_DIVIDER_MASK 0xffffff00
> +#define PP_REFERENCE_DIVIDER_SHIFT 8
> +#define PANEL_POWER_CYCLE_DELAY_MASK 0x1f
> +#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
>
> /* Panel fitting */
> #define PFIT_CONTROL _MMIO(dev_priv->info.display_mmio_offset + 0x61230)
> @@ -6750,77 +6794,6 @@ enum {
> #define PCH_LVDS _MMIO(0xe1180)
> #define LVDS_DETECTED (1 << 1)
>
> -/* vlv has 2 sets of panel control regs. */
> -#define _PIPEA_PP_STATUS (VLV_DISPLAY_BASE + 0x61200)
> -#define _PIPEA_PP_CONTROL (VLV_DISPLAY_BASE + 0x61204)
> -#define _PIPEA_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61208)
> -#define PANEL_PORT_SELECT_VLV(port) ((port) << 30)
> -#define _PIPEA_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6120c)
> -#define _PIPEA_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61210)
> -
> -#define _PIPEB_PP_STATUS (VLV_DISPLAY_BASE + 0x61300)
> -#define _PIPEB_PP_CONTROL (VLV_DISPLAY_BASE + 0x61304)
> -#define _PIPEB_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61308)
> -#define _PIPEB_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6130c)
> -#define _PIPEB_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61310)
> -
> -#define VLV_PIPE_PP_STATUS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_STATUS, _PIPEB_PP_STATUS)
> -#define VLV_PIPE_PP_CONTROL(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_CONTROL, _PIPEB_PP_CONTROL)
> -#define VLV_PIPE_PP_ON_DELAYS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_ON_DELAYS, _PIPEB_PP_ON_DELAYS)
> -#define VLV_PIPE_PP_OFF_DELAYS(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_OFF_DELAYS, _PIPEB_PP_OFF_DELAYS)
> -#define VLV_PIPE_PP_DIVISOR(pipe) _MMIO_PIPE(pipe, _PIPEA_PP_DIVISOR, _PIPEB_PP_DIVISOR)
> -
> -#define _PCH_PP_STATUS 0xc7200
> -#define _PCH_PP_CONTROL 0xc7204
> -#define PANEL_UNLOCK_REGS (0xabcd << 16)
> -#define PANEL_UNLOCK_MASK (0xffff << 16)
> -#define BXT_POWER_CYCLE_DELAY_MASK (0x1f0)
> -#define BXT_POWER_CYCLE_DELAY_SHIFT 4
> -#define EDP_FORCE_VDD (1 << 3)
> -#define EDP_BLC_ENABLE (1 << 2)
> -#define PANEL_POWER_RESET (1 << 1)
> -#define PANEL_POWER_OFF (0 << 0)
> -#define PANEL_POWER_ON (1 << 0)
> -#define _PCH_PP_ON_DELAYS 0xc7208
> -#define PANEL_PORT_SELECT_MASK (3 << 30)
> -#define PANEL_PORT_SELECT_LVDS (0 << 30)
> -#define PANEL_PORT_SELECT_DPA (1 << 30)
> -#define PANEL_PORT_SELECT_DPC (2 << 30)
> -#define PANEL_PORT_SELECT_DPD (3 << 30)
> -#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000)
> -#define PANEL_POWER_UP_DELAY_SHIFT 16
> -#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff)
> -#define PANEL_LIGHT_ON_DELAY_SHIFT 0
> -
> -#define _PCH_PP_OFF_DELAYS 0xc720c
> -#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000)
> -#define PANEL_POWER_DOWN_DELAY_SHIFT 16
> -#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff)
> -#define PANEL_LIGHT_OFF_DELAY_SHIFT 0
> -
> -#define _PCH_PP_DIVISOR 0xc7210
> -#define PP_REFERENCE_DIVIDER_MASK (0xffffff00)
> -#define PP_REFERENCE_DIVIDER_SHIFT 8
> -#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f)
> -#define PANEL_POWER_CYCLE_DELAY_SHIFT 0
> -
> -#define PCH_PP_STATUS _MMIO(_PCH_PP_STATUS)
> -#define PCH_PP_CONTROL _MMIO(_PCH_PP_CONTROL)
> -#define PCH_PP_ON_DELAYS _MMIO(_PCH_PP_ON_DELAYS)
> -#define PCH_PP_OFF_DELAYS _MMIO(_PCH_PP_OFF_DELAYS)
> -#define PCH_PP_DIVISOR _MMIO(_PCH_PP_DIVISOR)
> -
> -/* BXT PPS changes - 2nd set of PPS registers */
> -#define _BXT_PP_STATUS2 0xc7300
> -#define _BXT_PP_CONTROL2 0xc7304
> -#define _BXT_PP_ON_DELAYS2 0xc7308
> -#define _BXT_PP_OFF_DELAYS2 0xc730c
> -
> -#define BXT_PP_STATUS(n) _MMIO_PIPE(n, _PCH_PP_STATUS, _BXT_PP_STATUS2)
> -#define BXT_PP_CONTROL(n) _MMIO_PIPE(n, _PCH_PP_CONTROL, _BXT_PP_CONTROL2)
> -#define BXT_PP_ON_DELAYS(n) _MMIO_PIPE(n, _PCH_PP_ON_DELAYS, _BXT_PP_ON_DELAYS2)
> -#define BXT_PP_OFF_DELAYS(n) _MMIO_PIPE(n, _PCH_PP_OFF_DELAYS, _BXT_PP_OFF_DELAYS2)
> -
> #define _PCH_DP_B 0xe4100
> #define PCH_DP_B _MMIO(_PCH_DP_B)
> #define _PCH_DPB_AUX_CH_CTL 0xe4110
> diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
> index 5cfe4c7..c826b69 100644
> --- a/drivers/gpu/drm/i915/i915_suspend.c
> +++ b/drivers/gpu/drm/i915/i915_suspend.c
> @@ -44,16 +44,11 @@ static void i915_save_display(struct drm_device *dev)
> dev_priv->regfile.saveLVDS = I915_READ(LVDS);
>
> /* Panel power sequencer */
> - if (HAS_PCH_SPLIT(dev)) {
> - dev_priv->regfile.savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
> - dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
> - dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
> - dev_priv->regfile.savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
> - } else if (INTEL_INFO(dev)->gen <= 4) {
> - dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
> - dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
> - dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
> - dev_priv->regfile.savePP_DIVISOR = I915_READ(PP_DIVISOR);
> + if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4) {
> + dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL(0));
> + dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS(0));
> + dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS(0));
> + dev_priv->regfile.savePP_DIVISOR = I915_READ(PP_DIVISOR(0));
> }
>
> /* save FBC interval */
> @@ -79,16 +74,11 @@ static void i915_restore_display(struct drm_device *dev)
> I915_WRITE(LVDS, dev_priv->regfile.saveLVDS & mask);
>
> /* Panel power sequencer */
> - if (HAS_PCH_SPLIT(dev)) {
> - I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
> - I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
> - I915_WRITE(PCH_PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
> - I915_WRITE(PCH_PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
> - } else if (INTEL_INFO(dev)->gen <= 4) {
> - I915_WRITE(PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
> - I915_WRITE(PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
> - I915_WRITE(PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
> - I915_WRITE(PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
> + if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4) {
> + I915_WRITE(PP_ON_DELAYS(0), dev_priv->regfile.savePP_ON_DELAYS);
> + I915_WRITE(PP_OFF_DELAYS(0), dev_priv->regfile.savePP_OFF_DELAYS);
> + I915_WRITE(PP_DIVISOR(0), dev_priv->regfile.savePP_DIVISOR);
> + I915_WRITE(PP_CONTROL(0), dev_priv->regfile.savePP_CONTROL);
> }
>
> /* only restore FBC info on the platform that supports FBC*/
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index c6f27ab..3d5fd06 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1202,8 +1202,8 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
> if (HAS_PCH_SPLIT(dev)) {
> u32 port_sel;
>
> - pp_reg = PCH_PP_CONTROL;
> - port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
> + pp_reg = PP_CONTROL(0);
> + port_sel = I915_READ(PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;
>
> if (port_sel == PANEL_PORT_SELECT_LVDS &&
> I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
> @@ -1211,10 +1211,10 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
> /* XXX: else fix for eDP */
> } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
> /* presumably write lock depends on pipe, not port select */
> - pp_reg = VLV_PIPE_PP_CONTROL(pipe);
> + pp_reg = PP_CONTROL(pipe);
> panel_pipe = pipe;
> } else {
> - pp_reg = PP_CONTROL;
> + pp_reg = PP_CONTROL(0);
> if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
> panel_pipe = PIPE_B;
> }
> @@ -9411,7 +9411,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
> I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
> I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
> I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
> - I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
> + I915_STATE_WARN(I915_READ(PP_STATUS(0)) & PP_ON, "Panel power on\n");
> I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
> "CPU PWM1 enabled\n");
> if (IS_HASWELL(dev))
> @@ -14635,12 +14635,24 @@ static bool intel_crt_present(struct drm_device *dev)
> return true;
> }
>
> +static void intel_pps_init(struct drm_i915_private *dev_priv)
> +{
> + if (HAS_PCH_SPLIT(dev_priv) || IS_BROXTON(dev_priv))
> + dev_priv->pps_mmio_base = PCH_PPS_BASE;
> + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> + dev_priv->pps_mmio_base = VLV_PPS_BASE;
> + else
> + dev_priv->pps_mmio_base = PPS_BASE;
> +}
> +
> static void intel_setup_outputs(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct intel_encoder *encoder;
> bool dpd_is_edp = false;
>
> + intel_pps_init(dev_priv);
> +
> /*
> * intel_edp_init_connector() depends on this completing first, to
> * prevent the registeration of both eDP and LVDS and the incorrect
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8fe2afa..a5cef91 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -463,13 +463,13 @@ typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
> static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> - return I915_READ(VLV_PIPE_PP_STATUS(pipe)) & PP_ON;
> + return I915_READ(PP_STATUS(pipe)) & PP_ON;
> }
>
> static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> - return I915_READ(VLV_PIPE_PP_CONTROL(pipe)) & EDP_FORCE_VDD;
> + return I915_READ(PP_CONTROL(pipe)) & EDP_FORCE_VDD;
> }
>
> static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
> @@ -486,7 +486,7 @@ vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
> enum pipe pipe;
>
> for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
> - u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
> + u32 port_sel = I915_READ(PP_ON_DELAYS(pipe)) &
> PANEL_PORT_SELECT_MASK;
>
> if (port_sel != PANEL_PORT_SELECT_VLV(port))
> @@ -583,30 +583,23 @@ static void intel_pps_get_registers(struct drm_i915_private *dev_priv,
> struct intel_dp *intel_dp,
> struct pps_registers *regs)
> {
> + int pps_idx;
> +
> memset(regs, 0, sizeof(*regs));
>
> - if (IS_BROXTON(dev_priv)) {
> - int idx = bxt_power_sequencer_idx(intel_dp);
> + if (IS_BROXTON(dev_priv))
> + pps_idx = bxt_power_sequencer_idx(intel_dp);
> + else if (HAS_PCH_SPLIT(dev_priv))
> + pps_idx = 0;
int pps_idx = 0;
if (BXT)
...
else if (VLV||CHV)
...
is how I'd write this.
> + else
> + pps_idx = vlv_power_sequencer_pipe(intel_dp);
>
> - regs->pp_ctrl = BXT_PP_CONTROL(idx);
> - regs->pp_stat = BXT_PP_STATUS(idx);
> - regs->pp_on = BXT_PP_ON_DELAYS(idx);
> - regs->pp_off = BXT_PP_OFF_DELAYS(idx);
> - } else if (HAS_PCH_SPLIT(dev_priv)) {
> - regs->pp_ctrl = PCH_PP_CONTROL;
> - regs->pp_stat = PCH_PP_STATUS;
> - regs->pp_on = PCH_PP_ON_DELAYS;
> - regs->pp_off = PCH_PP_OFF_DELAYS;
> - regs->pp_div = PCH_PP_DIVISOR;
> - } else {
> - enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
> -
> - regs->pp_ctrl = VLV_PIPE_PP_CONTROL(pipe);
> - regs->pp_stat = VLV_PIPE_PP_STATUS(pipe);
> - regs->pp_on = VLV_PIPE_PP_ON_DELAYS(pipe);
> - regs->pp_off = VLV_PIPE_PP_OFF_DELAYS(pipe);
> - regs->pp_div = VLV_PIPE_PP_DIVISOR(pipe);
> - }
> + regs->pp_ctrl = PP_CONTROL(pps_idx);
> + regs->pp_stat = PP_STATUS(pps_idx);
> + regs->pp_on = PP_ON_DELAYS(pps_idx);
> + regs->pp_off = PP_OFF_DELAYS(pps_idx);
> + if (!IS_BROXTON(dev_priv))
> + regs->pp_div = PP_DIVISOR(pps_idx);
> }
>
> static i915_reg_t
> @@ -651,8 +644,8 @@ static int edp_notify_handler(struct notifier_block *this, unsigned long code,
> i915_reg_t pp_ctrl_reg, pp_div_reg;
> u32 pp_div;
>
> - pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
> - pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
> + pp_ctrl_reg = PP_CONTROL(pipe);
> + pp_div_reg = PP_DIVISOR(pipe);
> pp_div = I915_READ(pp_div_reg);
> pp_div &= PP_REFERENCE_DIVIDER_MASK;
>
> @@ -2729,7 +2722,7 @@ static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
> enum pipe pipe = intel_dp->pps_pipe;
> - i915_reg_t pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
> + i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe);
>
> edp_panel_vdd_off_sync(intel_dp);
>
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 4955047..413e729 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -217,21 +217,12 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
> struct intel_connector *intel_connector =
> &lvds_encoder->attached_connector->base;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - i915_reg_t ctl_reg, stat_reg;
> -
> - if (HAS_PCH_SPLIT(dev)) {
> - ctl_reg = PCH_PP_CONTROL;
> - stat_reg = PCH_PP_STATUS;
> - } else {
> - ctl_reg = PP_CONTROL;
> - stat_reg = PP_STATUS;
> - }
>
> I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
>
> - I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
> + I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) | POWER_TARGET_ON);
> POSTING_READ(lvds_encoder->reg);
> - if (intel_wait_for_register(dev_priv, stat_reg, PP_ON, PP_ON, 1000))
> + if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 1000))
> DRM_ERROR("timed out waiting for panel to power on\n");
>
> intel_panel_enable_backlight(intel_connector);
> @@ -242,18 +233,9 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
> struct drm_device *dev = encoder->base.dev;
> struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
> struct drm_i915_private *dev_priv = to_i915(dev);
> - i915_reg_t ctl_reg, stat_reg;
>
> - if (HAS_PCH_SPLIT(dev)) {
> - ctl_reg = PCH_PP_CONTROL;
> - stat_reg = PCH_PP_STATUS;
> - } else {
> - ctl_reg = PP_CONTROL;
> - stat_reg = PP_STATUS;
> - }
> -
> - I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
> - if (intel_wait_for_register(dev_priv, stat_reg, PP_ON, 0, 1000))
> + I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) & ~POWER_TARGET_ON);
> + if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, 0, 1000))
> DRM_ERROR("timed out waiting for panel to power off\n");
>
> I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
> @@ -904,13 +886,10 @@ void intel_lvds_init(struct drm_device *dev)
> * Unlock registers and just leave them unlocked. Do this before
> * checking quirk lists to avoid bogus WARNINGs.
> */
> - if (HAS_PCH_SPLIT(dev)) {
> - I915_WRITE(PCH_PP_CONTROL,
> - I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
> - } else if (INTEL_INFO(dev_priv)->gen < 5) {
> - I915_WRITE(PP_CONTROL,
> - I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
> - }
> + if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4)
> + I915_WRITE(PP_CONTROL(0),
> + I915_READ(PP_CONTROL(0)) | PANEL_UNLOCK_REGS);
> +
> if (!intel_lvds_supported(dev))
> return;
>
> @@ -945,12 +924,12 @@ void intel_lvds_init(struct drm_device *dev)
>
> /* Set the Panel Power On/Off timings if uninitialized. */
> if (INTEL_INFO(dev_priv)->gen < 5 &&
> - I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) {
> + I915_READ(PP_ON_DELAYS(0)) == 0 && I915_READ(PP_OFF_DELAYS(0)) == 0) {
> /* Set T2 to 40ms and T5 to 200ms */
> - I915_WRITE(PP_ON_DELAYS, 0x019007d0);
> + I915_WRITE(PP_ON_DELAYS(0), 0x019007d0);
>
> /* Set T3 to 35ms and Tx to 200ms */
> - I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
> + I915_WRITE(PP_OFF_DELAYS(0), 0x015e07d0);
>
> DRM_DEBUG_KMS("Panel power timings uninitialized, setting defaults\n");
> }
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list