[Intel-gfx] [PATCH 03/20] drm/kms-helpers: Extract drm_modeset_helper.[hc]
Sean Paul
seanpaul at chromium.org
Wed Aug 10 14:23:55 UTC 2016
On Tue, Aug 9, 2016 at 9:41 AM, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> While reviewing docs I spotted that we have a few functions that
> really just don't fit into their containing helper library section.
> Extract them and shovel them all into a new library for random one-off
> aux stuff.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> ---
> Documentation/gpu/drm-kms-helpers.rst | 9 ++
> drivers/gpu/drm/Makefile | 2 +-
> drivers/gpu/drm/drm_crtc_helper.c | 56 -------------
> drivers/gpu/drm/drm_kms_helper.c | 66 ---------------
> drivers/gpu/drm/drm_modeset_helper.c | 153 ++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/drm_plane_helper.c | 66 ---------------
> include/drm/drm_atomic_helper.h | 2 +
> include/drm/drm_crtc_helper.h | 6 +-
> include/drm/drm_kms_helper.h | 30 -------
> include/drm/drm_modeset_helper.h | 36 ++++++++
> include/drm/drm_plane_helper.h | 4 +-
> 11 files changed, 203 insertions(+), 227 deletions(-)
> delete mode 100644 drivers/gpu/drm/drm_kms_helper.c
Is there a reason we create drm_kms_helper.c/h in patch 2 and then
rename it in patch 3? Could you squash this?
> create mode 100644 drivers/gpu/drm/drm_modeset_helper.c
> delete mode 100644 include/drm/drm_kms_helper.h
> create mode 100644 include/drm/drm_modeset_helper.h
>
> diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
> index 23458252f198..0cc1b3bcc876 100644
> --- a/Documentation/gpu/drm-kms-helpers.rst
> +++ b/Documentation/gpu/drm-kms-helpers.rst
> @@ -258,3 +258,12 @@ Tile group
>
> .. kernel-doc:: drivers/gpu/drm/drm_crtc.c
> :doc: Tile group
> +
> +Auxiliary Modeset Helpers
> +=========================
> +
> +.. kernel-doc:: drivers/gpu/drm/drm_modeset_helper.c
> + :doc: aux kms helpers
> +
> +.. kernel-doc:: drivers/gpu/drm/drm_modeset_helper.c
> + :export:
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 0238bf8bc8c3..a5824d926dc9 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -24,7 +24,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
> drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
> drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
> drm_kms_helper_common.o drm_dp_dual_mode_helper.o \
> - drm_simple_kms_helper.o drm_blend.o
> + drm_simple_kms_helper.o drm_blend.o drm_modeset_helper.o
>
> drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
> diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
> index 604d3ef72ffa..5d2cb138eba6 100644
> --- a/drivers/gpu/drm/drm_crtc_helper.c
> +++ b/drivers/gpu/drm/drm_crtc_helper.c
> @@ -75,35 +75,6 @@
> */
>
> /**
> - * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
> - * connector list
> - * @dev: drm device to operate on
> - *
> - * Some userspace presumes that the first connected connector is the main
> - * display, where it's supposed to display e.g. the login screen. For
> - * laptops, this should be the main panel. Use this function to sort all
> - * (eDP/LVDS) panels to the front of the connector list, instead of
> - * painstakingly trying to initialize them in the right order.
> - */
> -void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
> -{
> - struct drm_connector *connector, *tmp;
> - struct list_head panel_list;
> -
> - INIT_LIST_HEAD(&panel_list);
> -
> - list_for_each_entry_safe(connector, tmp,
> - &dev->mode_config.connector_list, head) {
> - if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
> - connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> - list_move_tail(&connector->head, &panel_list);
> - }
> -
> - list_splice(&panel_list, &dev->mode_config.connector_list);
> -}
> -EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
> -
> -/**
> * drm_helper_encoder_in_use - check if a given encoder is in use
> * @encoder: encoder to check
> *
> @@ -913,33 +884,6 @@ int drm_helper_connector_dpms(struct drm_connector *connector, int mode)
> EXPORT_SYMBOL(drm_helper_connector_dpms);
>
> /**
> - * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
> - * @fb: drm_framebuffer object to fill out
> - * @mode_cmd: metadata from the userspace fb creation request
> - *
> - * This helper can be used in a drivers fb_create callback to pre-fill the fb's
> - * metadata fields.
> - */
> -void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
> - const struct drm_mode_fb_cmd2 *mode_cmd)
> -{
> - int i;
> -
> - fb->width = mode_cmd->width;
> - fb->height = mode_cmd->height;
> - for (i = 0; i < 4; i++) {
> - fb->pitches[i] = mode_cmd->pitches[i];
> - fb->offsets[i] = mode_cmd->offsets[i];
> - fb->modifier[i] = mode_cmd->modifier[i];
> - }
> - drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth,
> - &fb->bits_per_pixel);
> - fb->pixel_format = mode_cmd->pixel_format;
> - fb->flags = mode_cmd->flags;
> -}
> -EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
> -
> -/**
> * drm_helper_resume_force_mode - force-restore mode setting configuration
> * @dev: drm_device which should be restored
> *
> diff --git a/drivers/gpu/drm/drm_kms_helper.c b/drivers/gpu/drm/drm_kms_helper.c
> deleted file mode 100644
> index 127f574d29a4..000000000000
> --- a/drivers/gpu/drm/drm_kms_helper.c
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -/*
> - * Copyright (c) 2016 Intel Corporation
> - *
> - * Permission to use, copy, modify, distribute, and sell this software and its
> - * documentation for any purpose is hereby granted without fee, provided that
> - * the above copyright notice appear in all copies and that both that copyright
> - * notice and this permission notice appear in supporting documentation, and
> - * that the name of the copyright holders not be used in advertising or
> - * publicity pertaining to distribution of the software without specific,
> - * written prior permission. The copyright holders make no representations
> - * about the suitability of this software for any purpose. It is provided "as
> - * is" without express or implied warranty.
> - *
> - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> - * OF THIS SOFTWARE.
> - */
> -
> -#include <drm/drm_kms_helper.h>
> -#include <drm/drm_crtc.h>
> -#include <drm/drm_fourcc.h>
> -#include <drm/drm_crtc_helper.h>
> -#include <drm/drm_fb_helper.h>
> -#include <drm/drm_plane_helper.h>
> -#include <drm/drm_atomic_helper.h>
> -#include <drm/drm_edid.h>
> -
> -/**
> - * DOC: aux kms helpers
> - *
> - * This helper library contains various one-off functions which don't really fit
> - * anywhere else in the DRM modeset helper library.
> - */
> -
> -/**
> - * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
> - * connector list
> - * @dev: drm device to operate on
> - *
> - * Some userspace presumes that the first connected connector is the main
> - * display, where it's supposed to display e.g. the login screen. For
> - * laptops, this should be the main panel. Use this function to sort all
> - * (eDP/LVDS) panels to the front of the connector list, instead of
> - * painstakingly trying to initialize them in the right order.
> - */
> -void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
> -{
> - struct drm_connector *connector, *tmp;
> - struct list_head panel_list;
> -
> - INIT_LIST_HEAD(&panel_list);
> -
> - list_for_each_entry_safe(connector, tmp,
> - &dev->mode_config.connector_list, head) {
> - if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
> - connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> - list_move_tail(&connector->head, &panel_list);
> - }
> -
> - list_splice(&panel_list, &dev->mode_config.connector_list);
> -}
> -EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
> diff --git a/drivers/gpu/drm/drm_modeset_helper.c b/drivers/gpu/drm/drm_modeset_helper.c
> new file mode 100644
> index 000000000000..1d45738f8f98
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_modeset_helper.c
> @@ -0,0 +1,153 @@
> +/*
> + * Copyright (c) 2016 Intel Corporation
> + *
> + * Permission to use, copy, modify, distribute, and sell this software and its
> + * documentation for any purpose is hereby granted without fee, provided that
> + * the above copyright notice appear in all copies and that both that copyright
> + * notice and this permission notice appear in supporting documentation, and
> + * that the name of the copyright holders not be used in advertising or
> + * publicity pertaining to distribution of the software without specific,
> + * written prior permission. The copyright holders make no representations
> + * about the suitability of this software for any purpose. It is provided "as
> + * is" without express or implied warranty.
> + *
> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> + * OF THIS SOFTWARE.
> + */
> +
> +#include <drm/drm_modeset_helper.h>
> +#include <drm/drm_plane_helper.h>
> +
> +/**
> + * DOC: aux kms helpers
> + *
> + * This helper library contains various one-off functions which don't really fit
> + * anywhere else in the DRM modeset helper library.
> + */
> +
> +/**
> + * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
> + * connector list
> + * @dev: drm device to operate on
> + *
> + * Some userspace presumes that the first connected connector is the main
> + * display, where it's supposed to display e.g. the login screen. For
> + * laptops, this should be the main panel. Use this function to sort all
> + * (eDP/LVDS) panels to the front of the connector list, instead of
> + * painstakingly trying to initialize them in the right order.
> + */
> +void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
> +{
> + struct drm_connector *connector, *tmp;
> + struct list_head panel_list;
> +
> + INIT_LIST_HEAD(&panel_list);
> +
> + list_for_each_entry_safe(connector, tmp,
> + &dev->mode_config.connector_list, head) {
> + if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
> + connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> + list_move_tail(&connector->head, &panel_list);
> + }
> +
> + list_splice(&panel_list, &dev->mode_config.connector_list);
> +}
> +EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
> +
> +/**
> + * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
> + * @fb: drm_framebuffer object to fill out
> + * @mode_cmd: metadata from the userspace fb creation request
> + *
> + * This helper can be used in a drivers fb_create callback to pre-fill the fb's
> + * metadata fields.
> + */
> +void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
> + const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> + int i;
> +
> + fb->width = mode_cmd->width;
> + fb->height = mode_cmd->height;
> + for (i = 0; i < 4; i++) {
> + fb->pitches[i] = mode_cmd->pitches[i];
> + fb->offsets[i] = mode_cmd->offsets[i];
> + fb->modifier[i] = mode_cmd->modifier[i];
> + }
> + drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth,
> + &fb->bits_per_pixel);
> + fb->pixel_format = mode_cmd->pixel_format;
> + fb->flags = mode_cmd->flags;
> +}
> +EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
> +
> +/*
> + * This is the minimal list of formats that seem to be safe for modeset use
> + * with all current DRM drivers. Most hardware can actually support more
> + * formats than this and drivers may specify a more accurate list when
> + * creating the primary plane. However drivers that still call
> + * drm_plane_init() will use this minimal format list as the default.
> + */
> +static const uint32_t safe_modeset_formats[] = {
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_ARGB8888,
> +};
> +
> +static struct drm_plane *create_primary_plane(struct drm_device *dev)
> +{
> + struct drm_plane *primary;
> + int ret;
> +
> + primary = kzalloc(sizeof(*primary), GFP_KERNEL);
> + if (primary == NULL) {
> + DRM_DEBUG_KMS("Failed to allocate primary plane\n");
> + return NULL;
> + }
> +
> + /*
> + * Remove the format_default field from drm_plane when dropping
> + * this helper.
> + */
> + primary->format_default = true;
> +
> + /* possible_crtc's will be filled in later by crtc_init */
> + ret = drm_universal_plane_init(dev, primary, 0,
> + &drm_primary_helper_funcs,
> + safe_modeset_formats,
> + ARRAY_SIZE(safe_modeset_formats),
> + DRM_PLANE_TYPE_PRIMARY, NULL);
> + if (ret) {
> + kfree(primary);
> + primary = NULL;
> + }
> +
> + return primary;
> +}
> +
> +/**
> + * drm_crtc_init - Legacy CRTC initialization function
> + * @dev: DRM device
> + * @crtc: CRTC object to init
> + * @funcs: callbacks for the new CRTC
> + *
> + * Initialize a CRTC object with a default helper-provided primary plane and no
> + * cursor plane.
> + *
> + * Returns:
> + * Zero on success, error code on failure.
> + */
> +int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> + const struct drm_crtc_funcs *funcs)
> +{
> + struct drm_plane *primary;
> +
> + primary = create_primary_plane(dev);
> + return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs,
> + NULL);
> +}
> +EXPORT_SYMBOL(drm_crtc_init);
> diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
> index 16c4a7bd7465..ceef481031ee 100644
> --- a/drivers/gpu/drm/drm_plane_helper.c
> +++ b/drivers/gpu/drm/drm_plane_helper.c
> @@ -64,18 +64,6 @@
> */
>
> /*
> - * This is the minimal list of formats that seem to be safe for modeset use
> - * with all current DRM drivers. Most hardware can actually support more
> - * formats than this and drivers may specify a more accurate list when
> - * creating the primary plane. However drivers that still call
> - * drm_plane_init() will use this minimal format list as the default.
> - */
> -static const uint32_t safe_modeset_formats[] = {
> - DRM_FORMAT_XRGB8888,
> - DRM_FORMAT_ARGB8888,
> -};
> -
> -/*
> * Returns the connectors currently associated with a CRTC. This function
> * should be called twice: once with a NULL connector list to retrieve
> * the list size, and once with the properly allocated list to be filled in.
> @@ -363,60 +351,6 @@ const struct drm_plane_funcs drm_primary_helper_funcs = {
> };
> EXPORT_SYMBOL(drm_primary_helper_funcs);
>
> -static struct drm_plane *create_primary_plane(struct drm_device *dev)
> -{
> - struct drm_plane *primary;
> - int ret;
> -
> - primary = kzalloc(sizeof(*primary), GFP_KERNEL);
> - if (primary == NULL) {
> - DRM_DEBUG_KMS("Failed to allocate primary plane\n");
> - return NULL;
> - }
> -
> - /*
> - * Remove the format_default field from drm_plane when dropping
> - * this helper.
> - */
> - primary->format_default = true;
> -
> - /* possible_crtc's will be filled in later by crtc_init */
> - ret = drm_universal_plane_init(dev, primary, 0,
> - &drm_primary_helper_funcs,
> - safe_modeset_formats,
> - ARRAY_SIZE(safe_modeset_formats),
> - DRM_PLANE_TYPE_PRIMARY, NULL);
> - if (ret) {
> - kfree(primary);
> - primary = NULL;
> - }
> -
> - return primary;
> -}
> -
> -/**
> - * drm_crtc_init - Legacy CRTC initialization function
> - * @dev: DRM device
> - * @crtc: CRTC object to init
> - * @funcs: callbacks for the new CRTC
> - *
> - * Initialize a CRTC object with a default helper-provided primary plane and no
> - * cursor plane.
> - *
> - * Returns:
> - * Zero on success, error code on failure.
> - */
> -int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> - const struct drm_crtc_funcs *funcs)
> -{
> - struct drm_plane *primary;
> -
> - primary = create_primary_plane(dev);
> - return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs,
> - NULL);
> -}
> -EXPORT_SYMBOL(drm_crtc_init);
> -
> int drm_plane_helper_commit(struct drm_plane *plane,
> struct drm_plane_state *plane_state,
> struct drm_framebuffer *old_fb)
> diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
> index d86ae5dcd7b4..5a02e499f32b 100644
> --- a/include/drm/drm_atomic_helper.h
> +++ b/include/drm/drm_atomic_helper.h
> @@ -29,6 +29,8 @@
> #define DRM_ATOMIC_HELPER_H_
>
> #include <drm/drm_crtc.h>
> +#include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_modeset_helper.h>
>
> struct drm_atomic_state;
>
> diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
> index 4b37afa2b73b..982c299e435a 100644
> --- a/include/drm/drm_crtc_helper.h
> +++ b/include/drm/drm_crtc_helper.h
> @@ -41,6 +41,7 @@
>
> #include <drm/drm_crtc.h>
> #include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_modeset_helper.h>
>
> extern void drm_helper_disable_unused_functions(struct drm_device *dev);
> extern int drm_crtc_helper_set_config(struct drm_mode_set *set);
> @@ -53,11 +54,6 @@ extern bool drm_helper_encoder_in_use(struct drm_encoder *encoder);
>
> extern int drm_helper_connector_dpms(struct drm_connector *connector, int mode);
>
> -extern void drm_helper_move_panel_connectors_to_head(struct drm_device *);
> -
> -extern void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
> - const struct drm_mode_fb_cmd2 *mode_cmd);
> -
> extern void drm_helper_resume_force_mode(struct drm_device *dev);
>
> int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> diff --git a/include/drm/drm_kms_helper.h b/include/drm/drm_kms_helper.h
> deleted file mode 100644
> index 9f3ffb27c871..000000000000
> --- a/include/drm/drm_kms_helper.h
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -/*
> - * Copyright (c) 2016 Intel Corporation
> - *
> - * Permission to use, copy, modify, distribute, and sell this software and its
> - * documentation for any purpose is hereby granted without fee, provided that
> - * the above copyright notice appear in all copies and that both that copyright
> - * notice and this permission notice appear in supporting documentation, and
> - * that the name of the copyright holders not be used in advertising or
> - * publicity pertaining to distribution of the software without specific,
> - * written prior permission. The copyright holders make no representations
> - * about the suitability of this software for any purpose. It is provided "as
> - * is" without express or implied warranty.
> - *
> - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> - * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> - * OF THIS SOFTWARE.
> - */
> -
> -#ifndef __DRM_KMS_HELPER_H__
> -#define __DRM_KMS_HELPER_H__
> -
> -#include <drm/drmP.h>
> -
> -extern void drm_helper_move_panel_connectors_to_head(struct drm_device *);
> -
> -#endif
> diff --git a/include/drm/drm_modeset_helper.h b/include/drm/drm_modeset_helper.h
> new file mode 100644
> index 000000000000..b8051d5abe10
> --- /dev/null
> +++ b/include/drm/drm_modeset_helper.h
> @@ -0,0 +1,36 @@
> +/*
> + * Copyright (c) 2016 Intel Corporation
> + *
> + * Permission to use, copy, modify, distribute, and sell this software and its
> + * documentation for any purpose is hereby granted without fee, provided that
> + * the above copyright notice appear in all copies and that both that copyright
> + * notice and this permission notice appear in supporting documentation, and
> + * that the name of the copyright holders not be used in advertising or
> + * publicity pertaining to distribution of the software without specific,
> + * written prior permission. The copyright holders make no representations
> + * about the suitability of this software for any purpose. It is provided "as
> + * is" without express or implied warranty.
> + *
> + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> + * OF THIS SOFTWARE.
> + */
> +
> +#ifndef __DRM_KMS_HELPER_H__
> +#define __DRM_KMS_HELPER_H__
> +
> +#include <drm/drmP.h>
> +
> +void drm_helper_move_panel_connectors_to_head(struct drm_device *);
> +
> +void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
> + const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> + const struct drm_crtc_funcs *funcs);
> +
> +#endif
> diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
> index 0e0c3573cce0..badf9ab7a874 100644
> --- a/include/drm/drm_plane_helper.h
> +++ b/include/drm/drm_plane_helper.h
> @@ -27,6 +27,7 @@
> #include <drm/drm_rect.h>
> #include <drm/drm_crtc.h>
> #include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_modeset_helper.h>
>
> /*
> * Drivers that don't allow primary plane scaling may pass this macro in place
> @@ -37,9 +38,6 @@
> */
> #define DRM_PLANE_HELPER_NO_SCALING (1<<16)
>
> -int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
> - const struct drm_crtc_funcs *funcs);
> -
> int drm_plane_helper_check_update(struct drm_plane *plane,
> struct drm_crtc *crtc,
> struct drm_framebuffer *fb,
> --
> 2.8.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the Intel-gfx
mailing list