[Intel-gfx] [PATCH] drm/i915/perf: use DRM_DEBUG for userspace issues
Robert Bragg
robert at sixbynine.org
Thu Dec 1 17:21:52 UTC 2016
Avoid using DRM_ERROR for conditions userspace can trigger with a bad
config when opening a stream or from not reading data in a timely
fashion (whereby the OA buffer fills up). These conditions are tested
by i-g-t which treats error messages as failures if using the test
runner. This wasn't an issue while the i915-perf igt tests were being
run in isolation.
One message relating to seeing a spurious zeroed report was changed to
use DRM_NOTE instead of DRM_ERROR. Ideally this warning shouldn't be
seen, but it's not a serious problem if it is. Considering that the
tail margin mechanism is only a heuristic it's possible we might see
this from time to time.
Signed-off-by: Robert Bragg <robert at sixbynine.org:
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
fix i915_perf dbg messages
---
drivers/gpu/drm/i915/i915_perf.c | 42 ++++++++++++++++++++--------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 9551282..5705005 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -474,7 +474,7 @@ static int gen7_append_oa_reports(struct i915_perf_stream *stream,
* copying it to userspace...
*/
if (report32[0] == 0) {
- DRM_ERROR("Skipping spurious, invalid OA report\n");
+ DRM_NOTE("Skipping spurious, invalid OA report\n");
continue;
}
@@ -551,7 +551,7 @@ static int gen7_oa_read(struct i915_perf_stream *stream,
if (ret)
return ret;
- DRM_ERROR("OA buffer overflow: force restart\n");
+ DRM_DEBUG("OA buffer overflow: force restart\n");
dev_priv->perf.oa.ops.oa_disable(dev_priv);
dev_priv->perf.oa.ops.oa_enable(dev_priv);
@@ -1000,17 +1000,17 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
* IDs
*/
if (!dev_priv->perf.metrics_kobj) {
- DRM_ERROR("OA metrics weren't advertised via sysfs\n");
+ DRM_DEBUG("OA metrics weren't advertised via sysfs\n");
return -EINVAL;
}
if (!(props->sample_flags & SAMPLE_OA_REPORT)) {
- DRM_ERROR("Only OA report sampling supported\n");
+ DRM_DEBUG("Only OA report sampling supported\n");
return -EINVAL;
}
if (!dev_priv->perf.oa.ops.init_oa_buffer) {
- DRM_ERROR("OA unit not supported\n");
+ DRM_DEBUG("OA unit not supported\n");
return -ENODEV;
}
@@ -1019,17 +1019,17 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
* we currently only allow exclusive access
*/
if (dev_priv->perf.oa.exclusive_stream) {
- DRM_ERROR("OA unit already in use\n");
+ DRM_DEBUG("OA unit already in use\n");
return -EBUSY;
}
if (!props->metrics_set) {
- DRM_ERROR("OA metric set not specified\n");
+ DRM_DEBUG("OA metric set not specified\n");
return -EINVAL;
}
if (!props->oa_format) {
- DRM_ERROR("OA report format not specified\n");
+ DRM_DEBUG("OA report format not specified\n");
return -EINVAL;
}
@@ -1384,7 +1384,7 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
if (IS_ERR(specific_ctx)) {
ret = PTR_ERR(specific_ctx);
if (ret != -EINTR)
- DRM_ERROR("Failed to look up context with ID %u for opening perf stream\n",
+ DRM_DEBUG("Failed to look up context with ID %u for opening perf stream\n",
ctx_handle);
goto err;
}
@@ -1397,7 +1397,7 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv,
*/
if (!specific_ctx &&
i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) {
- DRM_ERROR("Insufficient privileges to open system-wide i915 perf stream\n");
+ DRM_DEBUG("Insufficient privileges to open system-wide i915 perf stream\n");
ret = -EACCES;
goto err_ctx;
}
@@ -1476,7 +1476,7 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
memset(props, 0, sizeof(struct perf_open_properties));
if (!n_props) {
- DRM_ERROR("No i915 perf properties given");
+ DRM_DEBUG("No i915 perf properties given\n");
return -EINVAL;
}
@@ -1487,7 +1487,7 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
* from userspace.
*/
if (n_props >= DRM_I915_PERF_PROP_MAX) {
- DRM_ERROR("More i915 perf properties specified than exist");
+ DRM_DEBUG("More i915 perf properties specified than exist\n");
return -EINVAL;
}
@@ -1515,26 +1515,26 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
case DRM_I915_PERF_PROP_OA_METRICS_SET:
if (value == 0 ||
value > dev_priv->perf.oa.n_builtin_sets) {
- DRM_ERROR("Unknown OA metric set ID");
+ DRM_DEBUG("Unknown OA metric set ID\n");
return -EINVAL;
}
props->metrics_set = value;
break;
case DRM_I915_PERF_PROP_OA_FORMAT:
if (value == 0 || value >= I915_OA_FORMAT_MAX) {
- DRM_ERROR("Invalid OA report format\n");
+ DRM_DEBUG("Invalid OA report format\n");
return -EINVAL;
}
if (!dev_priv->perf.oa.oa_formats[value].size) {
- DRM_ERROR("Invalid OA report format\n");
+ DRM_DEBUG("Invalid OA report format\n");
return -EINVAL;
}
props->oa_format = value;
break;
case DRM_I915_PERF_PROP_OA_EXPONENT:
if (value > OA_EXPONENT_MAX) {
- DRM_ERROR("OA timer exponent too high (> %u)\n",
- OA_EXPONENT_MAX);
+ DRM_DEBUG("OA timer exponent too high (> %u)\n",
+ OA_EXPONENT_MAX);
return -EINVAL;
}
@@ -1565,7 +1565,7 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
if (oa_freq_hz > i915_oa_max_sample_rate &&
!capable(CAP_SYS_ADMIN)) {
- DRM_ERROR("OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without root privileges\n",
+ DRM_DEBUG("OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without root privileges\n",
i915_oa_max_sample_rate);
return -EACCES;
}
@@ -1575,7 +1575,7 @@ static int read_properties_unlocked(struct drm_i915_private *dev_priv,
break;
default:
MISSING_CASE(id);
- DRM_ERROR("Unknown i915 perf property ID");
+ DRM_DEBUG("Unknown i915 perf property ID\n");
return -EINVAL;
}
@@ -1595,7 +1595,7 @@ int i915_perf_open_ioctl(struct drm_device *dev, void *data,
int ret;
if (!dev_priv->perf.initialized) {
- DRM_ERROR("i915 perf interface not available for this system");
+ DRM_DEBUG("i915 perf interface not available for this system\n");
return -ENOTSUPP;
}
@@ -1603,7 +1603,7 @@ int i915_perf_open_ioctl(struct drm_device *dev, void *data,
I915_PERF_FLAG_FD_NONBLOCK |
I915_PERF_FLAG_DISABLED;
if (param->flags & ~known_open_flags) {
- DRM_ERROR("Unknown drm_i915_perf_open_param flag\n");
+ DRM_DEBUG("Unknown drm_i915_perf_open_param flag\n");
return -EINVAL;
}
--
2.10.2
More information about the Intel-gfx
mailing list