[Intel-gfx] [PATCH i-g-t] igt_kms: Remove support for drivers with <1 drm_plane
Daniel Vetter
daniel at ffwll.ch
Thu Dec 8 16:01:51 UTC 2016
On Wed, Dec 07, 2016 at 07:16:13PM -0500, Lyude wrote:
> We've had support for universal planes since kernel version 3.15, so
> there's not really a good reason to try supporting drivers that lack
> plane support now. As well, the current has_universal_planes logic is
> broken anyway as it makes the assumption that having display planes
> always means we have both a primary plane and a cursor plane (this isn't
> true on radeon/amdgpu and nouveau).
>
> So, remove this, and just check for whether or not we have a cursor
> plane.
>
> Signed-off-by: Lyude <lyude at redhat.com>
lgtm, feel free to push.
-Daniel
> ---
> lib/igt_kms.c | 29 ++++++++++-------------------
> lib/igt_kms.h | 2 +-
> tests/kms_crtc_background_color.c | 2 --
> tests/kms_plane_scaling.c | 1 -
> tests/kms_rotation_crc.c | 25 +++++++++++++------------
> tests/kms_universal_plane.c | 5 +----
> 6 files changed, 25 insertions(+), 39 deletions(-)
>
> diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> index 82bb41d..0e7b8e8 100644
> --- a/lib/igt_kms.c
> +++ b/lib/igt_kms.c
> @@ -1407,7 +1407,6 @@ void igt_display_init(igt_display_t *display, int drm_fd)
> plane = &pipe->planes[IGT_PLANE_PRIMARY];
> plane->is_primary = 1;
> plane->index = IGT_PLANE_PRIMARY;
> - display->has_universal_planes = 1;
> break;
> case DRM_PLANE_TYPE_CURSOR:
> /*
> @@ -1420,7 +1419,7 @@ void igt_display_init(igt_display_t *display, int drm_fd)
> plane = &pipe->planes[IGT_PLANE_CURSOR];
> plane->is_cursor = 1;
> plane->index = IGT_PLANE_CURSOR;
> - display->has_universal_planes = 1;
> + display->has_cursor_plane = true;
> break;
> default:
> plane = &pipe->planes[p];
> @@ -1445,35 +1444,27 @@ void igt_display_init(igt_display_t *display, int drm_fd)
> plane->rotation = (igt_rotation_t)prop_value;
> }
>
> - if (display->has_universal_planes) {
> - /*
> - * If we have universal planes, we should have both
> - * primary and cursor planes setup now.
> - */
> - igt_assert(pipe->planes[IGT_PLANE_PRIMARY].drm_plane &&
> - pipe->planes[IGT_PLANE_CURSOR].drm_plane);
> + /*
> + * At the bare minimum, we should expect to have a primary
> + * plane
> + */
> + igt_assert(pipe->planes[IGT_PLANE_PRIMARY].drm_plane);
>
> + if (display->has_cursor_plane) {
> /*
> * Cursor was put in the last slot. If we have 0 or
> * only 1 sprite, that's the wrong slot and we need to
> * move it down.
> */
> if (p != IGT_PLANE_CURSOR) {
> - pipe->planes[p] = pipe->planes[IGT_PLANE_CURSOR];
> + pipe->planes[p] =
> + pipe->planes[IGT_PLANE_CURSOR];
> pipe->planes[p].index = p;
> memset(&pipe->planes[IGT_PLANE_CURSOR], 0,
> sizeof *plane);
> }
> } else {
> - /*
> - * No universal plane support. Add drm_plane-less
> - * primary and cursor planes.
> - */
> - plane = &pipe->planes[IGT_PLANE_PRIMARY];
> - plane->pipe = pipe;
> - plane->index = IGT_PLANE_PRIMARY;
> - plane->is_primary = true;
> -
> + /* Add drm_plane-less cursor */
> plane = &pipe->planes[p];
> plane->pipe = pipe;
> plane->index = p;
> diff --git a/lib/igt_kms.h b/lib/igt_kms.h
> index 6422adc..0dcb325 100644
> --- a/lib/igt_kms.h
> +++ b/lib/igt_kms.h
> @@ -311,7 +311,7 @@ struct igt_display {
> unsigned long pipes_in_use;
> igt_output_t *outputs;
> igt_pipe_t pipes[I915_MAX_PIPES];
> - bool has_universal_planes;
> + bool has_cursor_plane;
> bool is_atomic;
> };
>
> diff --git a/tests/kms_crtc_background_color.c b/tests/kms_crtc_background_color.c
> index b97c114..537d4ce 100644
> --- a/tests/kms_crtc_background_color.c
> +++ b/tests/kms_crtc_background_color.c
> @@ -131,8 +131,6 @@ static void test_crtc_background(data_t *data)
> enum pipe pipe;
> int valid_tests = 0;
>
> - igt_require(data->display.has_universal_planes);
> -
> for_each_pipe_with_valid_output(display, pipe, output) {
> igt_plane_t *plane;
>
> diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
> index 4546ce5..368da09 100644
> --- a/tests/kms_plane_scaling.c
> +++ b/tests/kms_plane_scaling.c
> @@ -183,7 +183,6 @@ static void test_plane_scaling(data_t *d)
> int valid_tests = 0;
> int primary_plane_scaling = 0; /* For now */
>
> - igt_require(d->display.has_universal_planes);
> igt_require(d->num_scalers);
>
> for_each_pipe_with_valid_output(display, pipe, output) {
> diff --git a/tests/kms_rotation_crc.c b/tests/kms_rotation_crc.c
> index 6cc1533..796b448 100644
> --- a/tests/kms_rotation_crc.c
> +++ b/tests/kms_rotation_crc.c
> @@ -106,10 +106,8 @@ static void commit_crtc(data_t *data, igt_output_t *output, igt_plane_t *plane)
> if (!plane->is_cursor)
> igt_plane_set_position(plane, data->pos_x, data->pos_y);
>
> - if (plane->is_primary || plane->is_cursor) {
> - igt_require(data->display.has_universal_planes);
> + if (plane->is_primary || plane->is_cursor)
> commit = COMMIT_UNIVERSAL;
> - }
>
> if (data->display.is_atomic)
> commit = COMMIT_ATOMIC;
> @@ -248,10 +246,11 @@ static void test_plane_rotation(data_t *data, enum igt_plane plane_type)
> unsigned int flip_count;
> int ret;
>
> - if (plane_type == IGT_PLANE_PRIMARY || plane_type == IGT_PLANE_CURSOR) {
> - igt_require(data->display.has_universal_planes);
> + if (plane_type == IGT_PLANE_PRIMARY || plane_type == IGT_PLANE_CURSOR)
> commit = COMMIT_UNIVERSAL;
> - }
> +
> + if (plane_type == IGT_PLANE_CURSOR)
> + igt_require(display->has_cursor_plane);
>
> if (data->display.is_atomic)
> commit = COMMIT_ATOMIC;
> @@ -341,10 +340,11 @@ static void test_plane_rotation_ytiled_obj(data_t *data, enum igt_plane plane_ty
> plane = igt_output_get_plane(output, plane_type);
> igt_require(igt_plane_supports_rotation(plane));
>
> - if (plane_type == IGT_PLANE_PRIMARY || plane_type == IGT_PLANE_CURSOR) {
> - igt_require(data->display.has_universal_planes);
> + if (plane_type == IGT_PLANE_PRIMARY || plane_type == IGT_PLANE_CURSOR)
> commit = COMMIT_UNIVERSAL;
> - }
> +
> + if (plane_type == IGT_PLANE_CURSOR)
> + igt_require(display->has_cursor_plane);
>
> if (data->display.is_atomic)
> commit = COMMIT_ATOMIC;
> @@ -408,10 +408,11 @@ static void test_plane_rotation_exhaust_fences(data_t *data, enum igt_plane plan
> plane = igt_output_get_plane(output, plane_type);
> igt_require(igt_plane_supports_rotation(plane));
>
> - if (plane_type == IGT_PLANE_PRIMARY || plane_type == IGT_PLANE_CURSOR) {
> - igt_require(data->display.has_universal_planes);
> + if (plane_type == IGT_PLANE_PRIMARY || plane_type == IGT_PLANE_CURSOR)
> commit = COMMIT_UNIVERSAL;
> - }
> +
> + if (plane_type == IGT_PLANE_CURSOR)
> + igt_require(display->has_cursor_plane);
>
> if (data->display.is_atomic)
> commit = COMMIT_ATOMIC;
> diff --git a/tests/kms_universal_plane.c b/tests/kms_universal_plane.c
> index b06b51e..b9e0651 100644
> --- a/tests/kms_universal_plane.c
> +++ b/tests/kms_universal_plane.c
> @@ -134,7 +134,6 @@ functional_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> int num_primary = 0, num_cursor = 0;
> int i;
>
> - igt_assert(data->display.has_universal_planes);
> igt_skip_on(pipe >= display->n_pipes);
>
> igt_info("Testing connector %s using pipe %s\n", igt_output_name(output),
> @@ -573,8 +572,8 @@ cursor_leak_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> int r, g, b;
> int count1, count2;
>
> - igt_assert(data->display.has_universal_planes);
> igt_skip_on(pipe >= display->n_pipes);
> + igt_require(display->has_cursor_plane);
>
> igt_output_set_pipe(output, pipe);
> mode = igt_output_get_mode(output);
> @@ -783,8 +782,6 @@ igt_main
>
> igt_require_pipe_crc();
> igt_display_init(&data.display, data.drm_fd);
> -
> - igt_require(data.display.has_universal_planes);
> }
>
> for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
> --
> 2.9.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list