[Intel-gfx] [PATCH 2/4] drm/i915: Compute sink's max lane count/link BW at Hotplug

Manasi Navare manasi.d.navare at intel.com
Thu Dec 8 21:39:54 UTC 2016


On Thu, Dec 08, 2016 at 11:23:39PM +0200, Jani Nikula wrote:
> On Tue, 06 Dec 2016, Manasi Navare <manasi.d.navare at intel.com> wrote:
> > Sink's capabilities are advertised through DPCD registers and get
> > updated only on hotplug. So they should be computed only once in the
> > long pulse handler and saved off in intel_dp structure for the use
> > later. For this reason two new fields max_sink_lane_count and
> > max_sink_link_bw are added to intel_dp structure.
> >
> > This also simplifies the fallback link rate/lane count logic
> > to handle link training failure. In that case, the max_sink_link_bw
> > and max_sink_lane_count can be reccomputed to match the fallback
> > values lowering the sink capabilities due to link train failure.
> >
> > Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> > Cc: Jani Nikula <jani.nikula at linux.intel.com>
> > Cc: Daniel Vetter <daniel.vetter at intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> 
> Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> 
> Eventually we may want to call the fields *link* rates, because that's
> what they'll effectively be. Transient values that don't reflect the
> sink or source capabilities, but the link capabilities.
>

Thanks Jani for your r-b.
Yes I agree, should I change the name to link_rate instead of sink_link_rate now?
The only reason I kept it as sink_link_rate is because we go ahead and calculate
the link capabilities later based on common link rate.

Regards
Manasi 
> > ---
> >  drivers/gpu/drm/i915/intel_dp.c  | 10 ++++++++--
> >  drivers/gpu/drm/i915/intel_drv.h |  4 ++++
> >  2 files changed, 12 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index db75bb9..434dc7d 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -156,7 +156,7 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
> >  	u8 source_max, sink_max;
> >  
> >  	source_max = intel_dig_port->max_lanes;
> > -	sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
> > +	sink_max = intel_dp->max_sink_lane_count;
> >  
> >  	return min(source_max, sink_max);
> >  }
> > @@ -213,7 +213,7 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
> >  
> >  	*sink_rates = default_rates;
> >  
> > -	return (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
> > +	return (intel_dp->max_sink_link_bw >> 3) + 1;
> >  }
> >  
> >  static int
> > @@ -4395,6 +4395,12 @@ static bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
> >  		      yesno(intel_dp_source_supports_hbr2(intel_dp)),
> >  		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
> >  
> > +	/* Set the max lane count for sink */
> > +	intel_dp->max_sink_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
> > +
> > +	/* Set the max link BW for sink */
> > +	intel_dp->max_sink_link_bw = intel_dp_max_link_bw(intel_dp);
> > +
> >  	intel_dp_print_rates(intel_dp);
> >  
> >  	intel_dp_read_desc(intel_dp);
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index fd77a3b..b6526ad 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -906,6 +906,10 @@ struct intel_dp {
> >  	/* sink rates as reported by DP_SUPPORTED_LINK_RATES */
> >  	uint8_t num_sink_rates;
> >  	int sink_rates[DP_MAX_SUPPORTED_RATES];
> > +	/* Max lane count for the sink as per DPCD registers */
> > +	uint8_t max_sink_lane_count;
> > +	/* Max link BW for the sink as per DPCD registers */
> > +	int max_sink_link_bw;
> >  	/* sink or branch descriptor */
> >  	struct intel_dp_desc desc;
> >  	struct drm_dp_aux aux;
> 
> -- 
> Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list