[Intel-gfx] [PATCH 3/8] drm/i915/huc: Add HuC fw loading support
anushasr
anusha.srivatsa at intel.com
Thu Dec 8 23:02:14 UTC 2016
From: Anusha Srivatsa <anusha.srivatsa at intel.com>
The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.
HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.
v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon)
update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased + comment changes.
v7: rebased.
v8: rebased.
v9: rebased. Changed the year in the copyright message to reflect
the right year.Correct the comments,remove the unwanted WARN message,
replace drm_gem_object_unreference() with i915_gem_object_put().Make the
prototypes in intel_huc.h non-extern.
v10: rebased. Update the file construction done by HuC. It is similar to
GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v11: Fix warnings remove old declaration
v12: Change dev to dev_priv in macro definition.
Corrected comments.
v13: rebased.
v14: rebased on top of drm-tip
v15: rebased. Updated functions intel_huc_load(),intel_huc_init() and
intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents
of intel_huc.h to intel_uc.h
Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Tested-by: Xiang Haihao <haihao.xiang at intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
Signed-off-by: Alex Dai <yu.dai at intel.com>
Signed-off-by: Peter Antoine <peter.antoine at intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/i915_drv.c | 4 +-
drivers/gpu/drm/i915/i915_drv.h | 3 +-
drivers/gpu/drm/i915/i915_guc_reg.h | 3 +
drivers/gpu/drm/i915/intel_guc_loader.c | 7 +-
drivers/gpu/drm/i915/intel_huc_loader.c | 264 ++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_uc.h | 22 +++
7 files changed, 299 insertions(+), 5 deletions(-)
create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 3c30916..01d4f4b 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -57,6 +57,7 @@ i915-y += i915_cmd_parser.o \
# general-purpose microcontroller (GuC) support
i915-y += intel_uc.o \
intel_guc_loader.o \
+ intel_huc_loader.o \
i915_guc_submission.o
# autogenerated null render state
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 6428588..85a47c2 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -600,6 +600,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
if (ret)
goto cleanup_irq;
+ intel_huc_init(dev_priv);
intel_guc_init(dev_priv);
ret = i915_gem_init(dev_priv);
@@ -627,6 +628,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
DRM_ERROR("failed to idle hardware; continuing to unload!\n");
i915_gem_fini(dev_priv);
cleanup_irq:
+ intel_huc_fini(dev);
intel_guc_fini(dev_priv);
drm_irq_uninstall(dev);
intel_teardown_gmbus(dev_priv);
@@ -1313,7 +1315,7 @@ void i915_driver_unload(struct drm_device *dev)
/* Flush any outstanding unpin_work. */
drain_workqueue(dev_priv->wq);
-
+ intel_huc_fini(dev);
intel_guc_fini(dev_priv);
i915_gem_fini(dev_priv);
intel_fbc_cleanup_cfb(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 1480e73..0371ca4 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2036,6 +2036,7 @@ struct drm_i915_private {
struct intel_gvt *gvt;
+ struct intel_huc huc;
struct intel_guc guc;
struct intel_csr csr;
@@ -2810,7 +2811,7 @@ intel_info(const struct drm_i915_private *dev_priv)
#define HAS_GUC(dev_priv) ((dev_priv)->info.has_guc)
#define HAS_GUC_UCODE(dev_priv) (HAS_GUC(dev_priv))
#define HAS_GUC_SCHED(dev_priv) (HAS_GUC(dev_priv))
-
+#define HAS_HUC_UCODE(dev_priv) (HAS_GUC(dev_priv))
#define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
#define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu)
diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
index 5e638fc..f9829f6 100644
--- a/drivers/gpu/drm/i915/i915_guc_reg.h
+++ b/drivers/gpu/drm/i915/i915_guc_reg.h
@@ -61,9 +61,12 @@
#define DMA_ADDRESS_SPACE_GTT (8 << 16)
#define DMA_COPY_SIZE _MMIO(0xc310)
#define DMA_CTRL _MMIO(0xc314)
+#define HUC_UKERNEL (1<<9)
#define UOS_MOVE (1<<4)
#define START_DMA (1<<0)
#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340)
+#define HUC_LOADING_AGENT_VCR (0<<1)
+#define HUC_LOADING_AGENT_GUC (1<<1)
#define GUC_WOPCM_OFFSET_VALUE 0x80000 /* 512KB */
#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 26a184f..b971351 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -309,8 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
/* Finally start the DMA */
- I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
-
+ I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+ _MASKED_BIT_DISABLE(HUC_UKERNEL));
/*
* Wait for the DMA to complete & the GuC to start up.
* NB: Docs recommend not using the interrupt for completion.
@@ -334,7 +334,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
return ret;
}
-static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
{
u32 wopcm_size = GUC_WOPCM_TOP;
@@ -511,6 +511,7 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
if (err)
goto fail;
+ intel_huc_load(dev_priv);
err = guc_ucode_xfer(dev_priv);
if (!err)
break;
diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c
new file mode 100644
index 0000000..e0efd1c
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_huc_loader.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_uc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * The same firmware loader is used as the GuC. However, the actual
+ * loading to HW is deferred until GEM initialization is done.
+ *
+ * Note that HuC firmware loading must be done before GuC loading.
+ */
+
+#define SKL_FW_MAJOR 01
+#define SKL_FW_MINOR 07
+#define SKL_BLD_NUM 1398
+
+#define HUC_FW_PATH(platform, major, minor, bld_num) \
+ "i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
+ __stringify(minor) "_" __stringify(bld_num) ".bin"
+
+#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
+ SKL_FW_MINOR, SKL_BLD_NUM)
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * huc_ucode_xfer() - DMA's the firmware
+ * @dev_priv: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+ struct i915_vma *vma;
+ unsigned long offset = 0;
+ u32 size;
+ int ret;
+
+ ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+ if (ret) {
+ DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+ return ret;
+ }
+
+ vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
+ if (IS_ERR(vma)) {
+ DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
+ return PTR_ERR(vma);
+ }
+
+ /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+ I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+ intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+ /* init WOPCM */
+ I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
+ I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+ HUC_LOADING_AGENT_GUC);
+
+ /* Set the source address for the uCode */
+ offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
+ I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+ I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+ /* Hardware doesn't look at destination address for HuC. Set it to 0,
+ * but still program the correct address space.
+ */
+ I915_WRITE(DMA_ADDR_1_LOW, 0);
+ I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+ size = huc_fw->header_size + huc_fw->ucode_size;
+ I915_WRITE(DMA_COPY_SIZE, size);
+
+ /* Start the DMA */
+ I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+ /* Wait for DMA to finish */
+ ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
+
+ DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+ intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+ /*
+ * We keep the object pages for reuse during resume. But we can unpin it
+ * now that DMA has completed, so it doesn't continue to take up space.
+ */
+ i915_vma_unpin(vma);
+
+ return ret;
+}
+
+/**
+ * intel_huc_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_load() is called.
+ */
+void intel_huc_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_huc *huc = &dev_priv->huc;
+ struct intel_uc_fw *huc_fw = &huc->huc_fw;
+ const char *fw_path = NULL;
+
+ huc_fw->uc_fw_path = NULL;
+ huc_fw->fetch_status = UC_FIRMWARE_NONE;
+ huc_fw->load_status = UC_FIRMWARE_NONE;
+ huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+ if (!HAS_HUC_UCODE(dev_priv))
+ return;
+
+ if (IS_SKYLAKE(dev_priv)) {
+ fw_path = I915_SKL_HUC_UCODE;
+ huc_fw->major_ver_wanted = SKL_FW_MAJOR;
+ huc_fw->minor_ver_wanted = SKL_FW_MINOR;
+ }
+
+ huc_fw->uc_fw_path = fw_path;
+ huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+ DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+ intel_uc_fw_fetch(dev_priv, huc_fw);
+}
+
+/**
+ * intel_huc_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return: non-zero code on error
+ */
+int intel_huc_load(struct drm_i915_private *dev_priv)
+{
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+ int err;
+
+ if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+ return 0;
+
+ DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+ huc_fw->uc_fw_path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ intel_uc_fw_status_repr(huc_fw->load_status));
+
+ if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+ huc_fw->load_status == UC_FIRMWARE_FAIL)
+ return -ENOEXEC;
+
+ huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+ switch (huc_fw->fetch_status) {
+ case UC_FIRMWARE_FAIL:
+ /* something went wrong :( */
+ err = -EIO;
+ goto fail;
+
+ case UC_FIRMWARE_NONE:
+ case UC_FIRMWARE_PENDING:
+ default:
+ /* "can't happen" */
+ WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+ huc_fw->uc_fw_path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ huc_fw->fetch_status);
+ err = -ENXIO;
+ goto fail;
+
+ case UC_FIRMWARE_SUCCESS:
+ break;
+ }
+
+ err = huc_ucode_xfer(dev_priv);
+ if (err)
+ goto fail;
+
+ huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+ DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+ huc_fw->uc_fw_path,
+ intel_uc_fw_status_repr(huc_fw->fetch_status),
+ intel_uc_fw_status_repr(huc_fw->load_status));
+
+ return 0;
+
+fail:
+ if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+ huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+ DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+ return err;
+}
+
+/**
+ * intel_huc_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_fini(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+ mutex_lock(&dev->struct_mutex);
+ if (huc_fw->uc_fw_obj)
+ i915_gem_object_put(huc_fw->uc_fw_obj);
+ huc_fw->uc_fw_obj = NULL;
+ mutex_unlock(&dev->struct_mutex);
+
+ huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}
+
diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
index be89f0b..ac92946 100644
--- a/drivers/gpu/drm/i915/intel_uc.h
+++ b/drivers/gpu/drm/i915/intel_uc.h
@@ -24,6 +24,12 @@
#ifndef _INTEL_UC_H_
#define _INTEL_UC_H_
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#define HUC_STATUS2 _MMIO(0xD3B0)
+#define HUC_FW_VERIFIED (1<<7)
+
#include "intel_guc_fwif.h"
#include "i915_guc_reg.h"
#include "intel_ringbuffer.h"
@@ -175,6 +181,13 @@ struct intel_guc {
struct mutex send_mutex;
};
+struct intel_huc {
+ /* Generic uC firmware management */
+ struct intel_uc_fw huc_fw;
+
+ /* HuC-specific additions */
+};
+
/* intel_uc.c */
void intel_uc_init_early(struct drm_i915_private *dev_priv);
bool intel_guc_recv(struct drm_i915_private *dev_priv, u32 *status);
@@ -191,6 +204,9 @@ extern void intel_guc_fini(struct drm_i915_private *dev_priv);
extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
extern int intel_guc_resume(struct drm_i915_private *dev_priv);
+void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
+ struct intel_uc_fw *uc_fw);
+u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
/* i915_guc_submission.c */
int i915_guc_submission_init(struct drm_i915_private *dev_priv);
@@ -205,4 +221,10 @@ void i915_guc_register(struct drm_i915_private *dev_priv);
void i915_guc_unregister(struct drm_i915_private *dev_priv);
int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
+/* intel_huc_loader.c */
+void intel_huc_init(struct drm_i915_private *dev_priv);
+void intel_huc_fini(struct drm_device *dev);
+int intel_huc_load(struct drm_i915_private *dev_priv);
+
+#endif
#endif
--
2.7.4
More information about the Intel-gfx
mailing list