[Intel-gfx] [PATCH 8/8] drm/i915/get_params: Add HuC status to getparams

anushasr anusha.srivatsa at intel.com
Thu Dec 8 23:02:19 UTC 2016


From: Peter Antoine <peter.antoine at intel.com>

This patch will allow for getparams to return the status of the HuC.
As the HuC has to be validated by the GuC this patch uses the validated
status to show when the HuC is loaded and ready for use. You cannot use
the loaded status as with the GuC as the HuC is verified after it is
loaded and is not usable until it is verified.

v2: removed the forewakes as the registers are already force-woken.
     (T.Ursulin)
v4: rebased.
v5: rebased on top of drm-tip.
v6: rebased. Removed any reference to intel_huc.h

Signed-off-by: Peter Antoine <peter.antoine at intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c         |  4 ++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 12 ++++++++++++
 drivers/gpu/drm/i915/intel_uc.h         |  1 +
 include/uapi/drm/i915_drm.h             |  1 +
 4 files changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 85a47c2..6be06a27 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -49,6 +49,7 @@
 #include "i915_trace.h"
 #include "i915_vgpu.h"
 #include "intel_drv.h"
+#include "intel_uc.h"
 
 static struct drm_driver driver;
 
@@ -349,6 +350,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		 */
 		value = 1;
 		break;
+	case I915_PARAM_HAS_HUC:
+		value = intel_is_huc_valid(dev_priv);
+		break;
 	default:
 		DRM_DEBUG("Unknown parameter %d\n", param->param);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c
index 96fc727..6704cc8 100644
--- a/drivers/gpu/drm/i915/intel_huc_loader.c
+++ b/drivers/gpu/drm/i915/intel_huc_loader.c
@@ -289,3 +289,15 @@ void intel_huc_fini(struct drm_device *dev)
 	huc_fw->fetch_status = UC_FIRMWARE_NONE;
 }
 
+/**
+ * intel_is_huc_valid() - Check to see if the HuC is fully loaded.
+ * @dev_priv:	drm device to check.
+ *
+ * This function will return true if the guc has been loaded and
+ * has valid firmware. The simplest way of doing this is to check
+ * if the HuC has been validated, if so it must have been loaded.
+ */
+int intel_is_huc_valid(struct drm_i915_private *dev_priv)
+{
+	return ((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) != 0);
+}
diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
index 1db8bc2..ccd3f69 100644
--- a/drivers/gpu/drm/i915/intel_uc.h
+++ b/drivers/gpu/drm/i915/intel_uc.h
@@ -226,6 +226,7 @@ int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
 void intel_huc_init(struct drm_i915_private *dev_priv);
 void intel_huc_fini(struct drm_device *dev);
 int intel_huc_load(struct drm_i915_private *dev_priv);
+int intel_is_huc_valid(struct drm_i915_private *dev_priv);
 
 #endif
 #endif
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index da32c2f..3e1964c 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -395,6 +395,7 @@ typedef struct drm_i915_irq_wait {
  * priorities and the driver will attempt to execute batches in priority order.
  */
 #define I915_PARAM_HAS_SCHEDULER	 41
+#define I915_PARAM_HAS_HUC		 42
 
 typedef struct drm_i915_getparam {
 	__s32 param;
-- 
2.7.4



More information about the Intel-gfx mailing list