[Intel-gfx] [PATCH 3/8] drm/i915/huc: Add HuC fw loading support
Michal Wajdeczko
michal.wajdeczko at linux.intel.com
Fri Dec 9 12:17:57 UTC 2016
On Thu, Dec 08, 2016 at 03:02:14PM -0800, anushasr wrote:
> From: Anusha Srivatsa <anusha.srivatsa at intel.com>
>
> The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
> is used for both cases.
>
> HuC loading needs to be before GuC loading. The WOPCM setting must
> be done early before loading any of them.
>
> v2: rebased on-top of drm-intel-nightly.
> removed if(HAS_GUC()) before the guc call. (D.Gordon)
> update huc_version number of format.
> v3: rebased to drm-intel-nightly, changed the file name format to
> match the one in the huc package.
> Changed dev->dev_private to to_i915()
> v4: moved function back to where it was.
> change wait_for_atomic to wait_for.
> v5: rebased + comment changes.
> v7: rebased.
> v8: rebased.
> v9: rebased. Changed the year in the copyright message to reflect
> the right year.Correct the comments,remove the unwanted WARN message,
> replace drm_gem_object_unreference() with i915_gem_object_put().Make the
> prototypes in intel_huc.h non-extern.
> v10: rebased. Update the file construction done by HuC. It is similar to
> GuC.Adopted the approach used in-
> https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
> v11: Fix warnings remove old declaration
> v12: Change dev to dev_priv in macro definition.
> Corrected comments.
> v13: rebased.
> v14: rebased on top of drm-tip
> v15: rebased. Updated functions intel_huc_load(),intel_huc_init() and
> intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents
> of intel_huc.h to intel_uc.h
>
> Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> Tested-by: Xiang Haihao <haihao.xiang at intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Signed-off-by: Alex Dai <yu.dai at intel.com>
> Signed-off-by: Peter Antoine <peter.antoine at intel.com>
> ---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/i915_drv.c | 4 +-
> drivers/gpu/drm/i915/i915_drv.h | 3 +-
> drivers/gpu/drm/i915/i915_guc_reg.h | 3 +
> drivers/gpu/drm/i915/intel_guc_loader.c | 7 +-
> drivers/gpu/drm/i915/intel_huc_loader.c | 264 ++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_uc.h | 22 +++
> 7 files changed, 299 insertions(+), 5 deletions(-)
> create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 3c30916..01d4f4b 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -57,6 +57,7 @@ i915-y += i915_cmd_parser.o \
> # general-purpose microcontroller (GuC) support
> i915-y += intel_uc.o \
> intel_guc_loader.o \
> + intel_huc_loader.o \
> i915_guc_submission.o
>
> # autogenerated null render state
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 6428588..85a47c2 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -600,6 +600,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
> if (ret)
> goto cleanup_irq;
>
> + intel_huc_init(dev_priv);
> intel_guc_init(dev_priv);
>
> ret = i915_gem_init(dev_priv);
> @@ -627,6 +628,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
> DRM_ERROR("failed to idle hardware; continuing to unload!\n");
> i915_gem_fini(dev_priv);
> cleanup_irq:
> + intel_huc_fini(dev);
> intel_guc_fini(dev_priv);
> drm_irq_uninstall(dev);
> intel_teardown_gmbus(dev_priv);
> @@ -1313,7 +1315,7 @@ void i915_driver_unload(struct drm_device *dev)
>
> /* Flush any outstanding unpin_work. */
> drain_workqueue(dev_priv->wq);
> -
> + intel_huc_fini(dev);
> intel_guc_fini(dev_priv);
> i915_gem_fini(dev_priv);
> intel_fbc_cleanup_cfb(dev_priv);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 1480e73..0371ca4 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2036,6 +2036,7 @@ struct drm_i915_private {
>
> struct intel_gvt *gvt;
>
> + struct intel_huc huc;
> struct intel_guc guc;
>
> struct intel_csr csr;
> @@ -2810,7 +2811,7 @@ intel_info(const struct drm_i915_private *dev_priv)
> #define HAS_GUC(dev_priv) ((dev_priv)->info.has_guc)
> #define HAS_GUC_UCODE(dev_priv) (HAS_GUC(dev_priv))
> #define HAS_GUC_SCHED(dev_priv) (HAS_GUC(dev_priv))
> -
> +#define HAS_HUC_UCODE(dev_priv) (HAS_GUC(dev_priv))
> #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
>
> #define HAS_POOLED_EU(dev_priv) ((dev_priv)->info.has_pooled_eu)
> diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
> index 5e638fc..f9829f6 100644
> --- a/drivers/gpu/drm/i915/i915_guc_reg.h
> +++ b/drivers/gpu/drm/i915/i915_guc_reg.h
> @@ -61,9 +61,12 @@
> #define DMA_ADDRESS_SPACE_GTT (8 << 16)
> #define DMA_COPY_SIZE _MMIO(0xc310)
> #define DMA_CTRL _MMIO(0xc314)
> +#define HUC_UKERNEL (1<<9)
> #define UOS_MOVE (1<<4)
> #define START_DMA (1<<0)
> #define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340)
> +#define HUC_LOADING_AGENT_VCR (0<<1)
> +#define HUC_LOADING_AGENT_GUC (1<<1)
> #define GUC_WOPCM_OFFSET_VALUE 0x80000 /* 512KB */
> #define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)
>
> diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
> index 26a184f..b971351 100644
> --- a/drivers/gpu/drm/i915/intel_guc_loader.c
> +++ b/drivers/gpu/drm/i915/intel_guc_loader.c
> @@ -309,8 +309,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
> I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
>
> /* Finally start the DMA */
> - I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
> -
> + I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
> + _MASKED_BIT_DISABLE(HUC_UKERNEL));
> /*
> * Wait for the DMA to complete & the GuC to start up.
> * NB: Docs recommend not using the interrupt for completion.
> @@ -334,7 +334,7 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
> return ret;
> }
>
> -static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
> +u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
> {
> u32 wopcm_size = GUC_WOPCM_TOP;
>
> @@ -511,6 +511,7 @@ int intel_guc_setup(struct drm_i915_private *dev_priv)
> if (err)
> goto fail;
>
> + intel_huc_load(dev_priv);
> err = guc_ucode_xfer(dev_priv);
> if (!err)
> break;
> diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c
> new file mode 100644
> index 0000000..e0efd1c
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_huc_loader.c
> @@ -0,0 +1,264 @@
> +/*
> + * Copyright © 2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +#include <linux/firmware.h>
> +#include "i915_drv.h"
> +#include "intel_uc.h"
> +
> +/**
> + * DOC: HuC Firmware
> + *
> + * Motivation:
> + * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
> + * Efficiency Video Coding) operations. Userspace can use the firmware
> + * capabilities by adding HuC specific commands to batch buffers.
> + *
> + * Implementation:
> + * The same firmware loader is used as the GuC. However, the actual
> + * loading to HW is deferred until GEM initialization is done.
> + *
> + * Note that HuC firmware loading must be done before GuC loading.
> + */
> +
> +#define SKL_FW_MAJOR 01
> +#define SKL_FW_MINOR 07
Can we use SKL_HUC_FW_ prefix to distinguish these macros from similar
defined in intel_guc_loader.c ?
> +#define SKL_BLD_NUM 1398
> +
> +#define HUC_FW_PATH(platform, major, minor, bld_num) \
> + "i915/" __stringify(platform) "_huc_ver" __stringify(major) "_" \
> + __stringify(minor) "_" __stringify(bld_num) ".bin"
> +
> +#define I915_SKL_HUC_UCODE HUC_FW_PATH(skl, SKL_FW_MAJOR, \
> + SKL_FW_MINOR, SKL_BLD_NUM)
> +MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
> +
> +/**
> + * huc_ucode_xfer() - DMA's the firmware
> + * @dev_priv: the drm device
> + *
> + * This function takes the gem object containing the firmware, sets up the DMA
> + * engine MMIO, triggers the DMA operation and waits for it to finish.
> + *
> + * Transfer the firmware image to RAM for execution by the microcontroller.
> + *
> + * Return: 0 on success, non-zero on failure
> + */
> +
> +static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
> +{
> + struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
> + struct i915_vma *vma;
> + unsigned long offset = 0;
> + u32 size;
> + int ret;
> +
> + ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
> + if (ret) {
> + DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
> + return ret;
> + }
> +
> + vma = i915_gem_object_ggtt_pin(huc_fw->uc_fw_obj, NULL, 0, 0, 0);
> + if (IS_ERR(vma)) {
> + DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
> + return PTR_ERR(vma);
> + }
> +
> + /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
> + I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
> +
> + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
> +
> + /* init WOPCM */
> + I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
> + I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
> + HUC_LOADING_AGENT_GUC);
> +
> + /* Set the source address for the uCode */
> + offset = i915_ggtt_offset(vma) + huc_fw->header_offset;
> + I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
> + I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
> +
> + /* Hardware doesn't look at destination address for HuC. Set it to 0,
> + * but still program the correct address space.
> + */
> + I915_WRITE(DMA_ADDR_1_LOW, 0);
> + I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
> +
> + size = huc_fw->header_size + huc_fw->ucode_size;
> + I915_WRITE(DMA_COPY_SIZE, size);
> +
> + /* Start the DMA */
> + I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
> +
> + /* Wait for DMA to finish */
> + ret = wait_for((I915_READ(DMA_CTRL) & START_DMA) == 0, 100);
> +
> + DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
> +
> + intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> +
> + /*
> + * We keep the object pages for reuse during resume. But we can unpin it
> + * now that DMA has completed, so it doesn't continue to take up space.
> + */
> + i915_vma_unpin(vma);
> +
> + return ret;
> +}
> +
> +/**
> + * intel_huc_init() - initiate HuC firmware loading request
> + * @dev: the drm device
Mismatched param name.
> + *
> + * Called early during driver load, but after GEM is initialised. The loading
> + * will continue only when driver explicitly specify firmware name and version.
> + * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
> + * capable or driver yet support it. And there will be no error message for
> + * UC_FIRMWARE_NONE cases.
> + *
> + * The DMA-copying to HW is done later when intel_huc_load() is called.
> + */
> +void intel_huc_init(struct drm_i915_private *dev_priv)
> +{
> + struct intel_huc *huc = &dev_priv->huc;
Maybe *huc shall be passed as only param (to match intel_huc function name).
Then dev_priv could be recreated from huc_to_i915().
> + struct intel_uc_fw *huc_fw = &huc->huc_fw;
> + const char *fw_path = NULL;
> +
> + huc_fw->uc_fw_path = NULL;
> + huc_fw->fetch_status = UC_FIRMWARE_NONE;
> + huc_fw->load_status = UC_FIRMWARE_NONE;
> + huc_fw->fw_type = UC_FW_TYPE_HUC;
> +
> + if (!HAS_HUC_UCODE(dev_priv))
> + return;
> +
> + if (IS_SKYLAKE(dev_priv)) {
> + fw_path = I915_SKL_HUC_UCODE;
> + huc_fw->major_ver_wanted = SKL_FW_MAJOR;
> + huc_fw->minor_ver_wanted = SKL_FW_MINOR;
> + }
> +
> + huc_fw->uc_fw_path = fw_path;
> + huc_fw->fetch_status = UC_FIRMWARE_PENDING;
> +
> + DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
> +
> + intel_uc_fw_fetch(dev_priv, huc_fw);
> +}
> +
> +/**
> + * intel_huc_load() - load HuC uCode to device
> + * @dev: the drm device
Mismatched param name.
> + *
> + * Called from gem_init_hw() during driver loading and also after a GPU reset.
> + * Be note that HuC loading must be done before GuC loading.
> + *
> + * The firmware image should have already been fetched into memory by the
> + * earlier call to intel_huc_init(), so here we need only check that
> + * is succeeded, and then transfer the image to the h/w.
> + *
> + * Return: non-zero code on error
> + */
> +int intel_huc_load(struct drm_i915_private *dev_priv)
> +{
> + struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
> + int err;
> +
> + if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
> + return 0;
> +
> + DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
> + huc_fw->uc_fw_path,
> + intel_uc_fw_status_repr(huc_fw->fetch_status),
> + intel_uc_fw_status_repr(huc_fw->load_status));
> +
> + if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
> + huc_fw->load_status == UC_FIRMWARE_FAIL)
> + return -ENOEXEC;
> +
> + huc_fw->load_status = UC_FIRMWARE_PENDING;
> +
> + switch (huc_fw->fetch_status) {
> + case UC_FIRMWARE_FAIL:
> + /* something went wrong :( */
> + err = -EIO;
> + goto fail;
> +
> + case UC_FIRMWARE_NONE:
> + case UC_FIRMWARE_PENDING:
> + default:
> + /* "can't happen" */
> + WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
> + huc_fw->uc_fw_path,
> + intel_uc_fw_status_repr(huc_fw->fetch_status),
> + huc_fw->fetch_status);
> + err = -ENXIO;
> + goto fail;
> +
> + case UC_FIRMWARE_SUCCESS:
> + break;
> + }
> +
> + err = huc_ucode_xfer(dev_priv);
> + if (err)
> + goto fail;
> +
> + huc_fw->load_status = UC_FIRMWARE_SUCCESS;
> +
> + DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
> + huc_fw->uc_fw_path,
> + intel_uc_fw_status_repr(huc_fw->fetch_status),
> + intel_uc_fw_status_repr(huc_fw->load_status));
> +
> + return 0;
> +
> +fail:
> + if (huc_fw->load_status == UC_FIRMWARE_PENDING)
> + huc_fw->load_status = UC_FIRMWARE_FAIL;
> +
> + DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
> +
> + return err;
> +}
> +
> +/**
> + * intel_huc_fini() - clean up resources allocated for HuC
> + * @dev: the drm device
> + *
> + * Cleans up by releasing the huc firmware GEM obj.
> + */
> +void intel_huc_fini(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
> +
> + mutex_lock(&dev->struct_mutex);
> + if (huc_fw->uc_fw_obj)
> + i915_gem_object_put(huc_fw->uc_fw_obj);
> + huc_fw->uc_fw_obj = NULL;
> + mutex_unlock(&dev->struct_mutex);
> +
> + huc_fw->fetch_status = UC_FIRMWARE_NONE;
> +}
> +
> diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
> index be89f0b..ac92946 100644
> --- a/drivers/gpu/drm/i915/intel_uc.h
> +++ b/drivers/gpu/drm/i915/intel_uc.h
> @@ -24,6 +24,12 @@
> #ifndef _INTEL_UC_H_
> #define _INTEL_UC_H_
>
> +#ifndef _INTEL_HUC_H_
> +#define _INTEL_HUC_H_
Typo ? This is still intel_uc.h file, right ?
> +
> +#define HUC_STATUS2 _MMIO(0xD3B0)
> +#define HUC_FW_VERIFIED (1<<7)
> +
Is it correct place for these defs?
What about i915_guc_reg.h ?
> #include "intel_guc_fwif.h"
> #include "i915_guc_reg.h"
> #include "intel_ringbuffer.h"
> @@ -175,6 +181,13 @@ struct intel_guc {
> struct mutex send_mutex;
> };
>
> +struct intel_huc {
> + /* Generic uC firmware management */
> + struct intel_uc_fw huc_fw;
> +
> + /* HuC-specific additions */
> +};
> +
> /* intel_uc.c */
> void intel_uc_init_early(struct drm_i915_private *dev_priv);
> bool intel_guc_recv(struct drm_i915_private *dev_priv, u32 *status);
> @@ -191,6 +204,9 @@ extern void intel_guc_fini(struct drm_i915_private *dev_priv);
> extern const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
> extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
> extern int intel_guc_resume(struct drm_i915_private *dev_priv);
> +void intel_uc_fw_fetch(struct drm_i915_private *dev_priv,
> + struct intel_uc_fw *uc_fw);
> +u32 guc_wopcm_size(struct drm_i915_private *dev_priv);
All other public functions have intel_ prefix.
>
> /* i915_guc_submission.c */
> int i915_guc_submission_init(struct drm_i915_private *dev_priv);
> @@ -205,4 +221,10 @@ void i915_guc_register(struct drm_i915_private *dev_priv);
> void i915_guc_unregister(struct drm_i915_private *dev_priv);
> int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
>
> +/* intel_huc_loader.c */
> +void intel_huc_init(struct drm_i915_private *dev_priv);
> +void intel_huc_fini(struct drm_device *dev);
> +int intel_huc_load(struct drm_i915_private *dev_priv);
> +
> +#endif
> #endif
> --
> 2.7.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list