[Intel-gfx] [PATCH v2 3/5] drm/i915: Fixes to support DP Compliance EDID tests

Manasi Navare manasi.d.navare at intel.com
Sat Dec 10 00:22:51 UTC 2016


This patch addresses a few issues from the original patch for
DP Compliance EDID test support submitted by
Todd Previte<todd.previte at gmail.com>

Video Mode requested in the EDID test handler for the EDID Read
test (CTS 4.2.2.3) should be set to PREFERRED as per the CTS spec.

v2:
* Added read debugfs data from test_data.edid if its EDID test (Jani NIkula)
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at intel.com>
Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 5 ++++-
 drivers/gpu/drm/i915/intel_dp.c     | 4 ++--
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 2c9b056..b2ff532 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4536,7 +4536,10 @@ static int i915_displayport_test_data_show(struct seq_file *m, void *data)
 		if (connector->status == connector_status_connected &&
 		    connector->encoder != NULL) {
 			intel_dp = enc_to_intel_dp(connector->encoder);
-			seq_printf(m, "%lx", intel_dp->compliance.test_data.edid);
+			if (intel_dp->compliance.test_type ==
+			    DP_TEST_LINK_EDID_READ)
+				seq_printf(m, "%lx",
+					   intel_dp->compliance.test_data.edid);
 		} else
 			seq_puts(m, "0");
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index bbf8cdc..fb6f9e5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3864,7 +3864,7 @@ static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
 
 static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 {
-	uint8_t test_result = DP_TEST_NAK;
+	uint8_t test_result = DP_TEST_ACK;
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
 	struct drm_connector *connector = &intel_connector->base;
 
@@ -3899,7 +3899,7 @@ static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("Failed to write EDID checksum\n");
 
 		test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
-		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_STANDARD;
+		intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED;
 	}
 
 	/* Set test active flag here so userspace doesn't interrupt things */
-- 
1.9.1



More information about the Intel-gfx mailing list