[Intel-gfx] [PATCH] drm: Simplify GETRESOURCES ioctl
Daniel Vetter
daniel.vetter at ffwll.ch
Sun Dec 11 19:20:19 UTC 2016
Looping twice when we can do it once is silly. Also use a consistent
style. Note that there's a good race with the connector list walking,
since that is no longer protected by mode_config.mutex. But that's for
a later patch to fix.
v2: Actually try to not blow up, somehow I lost the hunk that checks
we don't copy too much. Noticed by Chris.
v3:
- squash all drm_mode_getresources cleanups into one
- use consistent style for walking objects (Chris)
v4:
- Use u64_to_user_ptr (Chris)
- Don't forget to copy the last connector (Chris)
v5: Chris was right ...
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
drivers/gpu/drm/drm_mode_config.c | 111 ++++++++++++++------------------------
1 file changed, 39 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index 2735a5847ffa..b1e8bbceaf39 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -84,17 +84,11 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_card_res *card_res = data;
- struct list_head *lh;
struct drm_framebuffer *fb;
struct drm_connector *connector;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
- int ret = 0;
- int connector_count = 0;
- int crtc_count = 0;
- int fb_count = 0;
- int encoder_count = 0;
- int copied = 0;
+ int count, ret = 0;
uint32_t __user *fb_id;
uint32_t __user *crtc_id;
uint32_t __user *connector_id;
@@ -105,89 +99,62 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
mutex_lock(&file_priv->fbs_lock);
- /*
- * For the non-control nodes we need to limit the list of resources
- * by IDs in the group list for this node
- */
- list_for_each(lh, &file_priv->fbs)
- fb_count++;
-
- /* handle this in 4 parts */
- /* FBs */
- if (card_res->count_fbs >= fb_count) {
- copied = 0;
- fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
- list_for_each_entry(fb, &file_priv->fbs, filp_head) {
- if (put_user(fb->base.id, fb_id + copied)) {
- mutex_unlock(&file_priv->fbs_lock);
- return -EFAULT;
- }
- copied++;
+ count = 0;
+ fb_id = u64_to_user_ptr(card_res->fb_id_ptr);
+ list_for_each_entry(fb, &file_priv->fbs, filp_head) {
+ if (count < card_res->count_fbs &&
+ put_user(fb->base.id, fb_id + count)) {
+ mutex_unlock(&file_priv->fbs_lock);
+ return -EFAULT;
}
+ count++;
}
- card_res->count_fbs = fb_count;
+ card_res->count_fbs = count;
mutex_unlock(&file_priv->fbs_lock);
/* mode_config.mutex protects the connector list against e.g. DP MST
* connector hot-adding. CRTC/Plane lists are invariant. */
mutex_lock(&dev->mode_config.mutex);
- drm_for_each_crtc(crtc, dev)
- crtc_count++;
-
- drm_for_each_connector(connector, dev)
- connector_count++;
-
- drm_for_each_encoder(encoder, dev)
- encoder_count++;
-
card_res->max_height = dev->mode_config.max_height;
card_res->min_height = dev->mode_config.min_height;
card_res->max_width = dev->mode_config.max_width;
card_res->min_width = dev->mode_config.min_width;
- /* CRTCs */
- if (card_res->count_crtcs >= crtc_count) {
- copied = 0;
- crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr;
- drm_for_each_crtc(crtc, dev) {
- if (put_user(crtc->base.id, crtc_id + copied)) {
- ret = -EFAULT;
- goto out;
- }
- copied++;
+ count = 0;
+ crtc_id = u64_to_user_ptr(card_res->crtc_id_ptr);
+ drm_for_each_crtc(crtc, dev) {
+ if (count < card_res->count_crtcs &&
+ put_user(crtc->base.id, crtc_id + count)) {
+ ret = -EFAULT;
+ goto out;
}
+ count++;
}
- card_res->count_crtcs = crtc_count;
-
- /* Encoders */
- if (card_res->count_encoders >= encoder_count) {
- copied = 0;
- encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr;
- drm_for_each_encoder(encoder, dev) {
- if (put_user(encoder->base.id, encoder_id +
- copied)) {
- ret = -EFAULT;
- goto out;
- }
- copied++;
+ card_res->count_crtcs = count;
+
+ count = 0;
+ encoder_id = u64_to_user_ptr(card_res->encoder_id_ptr);
+ drm_for_each_encoder(encoder, dev) {
+ if (count < card_res->count_encoders &&
+ put_user(encoder->base.id, encoder_id + count)) {
+ ret = -EFAULT;
+ goto out;
}
+ count++;
}
- card_res->count_encoders = encoder_count;
-
- /* Connectors */
- if (card_res->count_connectors >= connector_count) {
- copied = 0;
- connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr;
- drm_for_each_connector(connector, dev) {
- if (put_user(connector->base.id,
- connector_id + copied)) {
- ret = -EFAULT;
- goto out;
- }
- copied++;
+ card_res->count_encoders = count;
+
+ count = 0;
+ connector_id = u64_to_user_ptr(card_res->connector_id_ptr);
+ drm_for_each_connector(connector, dev) {
+ if (count < card_res->count_connectors &&
+ put_user(connector->base.id, connector_id + count)) {
+ ret = -EFAULT;
+ goto out;
}
+ count++;
}
- card_res->count_connectors = connector_count;
+ card_res->count_connectors = count;
out:
mutex_unlock(&dev->mode_config.mutex);
--
2.10.2
More information about the Intel-gfx
mailing list