[Intel-gfx] [GLK MIPI DSI V2 8/9] drm/i915/glk: Program dphy param reg for GLK
Madhav Chauhan
madhav.chauhan at intel.com
Thu Dec 15 09:01:39 UTC 2016
For GEMINILAKE, dphy param reg values are programmed in terms
of HS byte clock while for legacy platforms in terms of ddrclk
Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
---
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 33 +++++++++++++++++++++++-------
1 file changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 0d8ff00..647eca4 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -668,16 +668,26 @@ struct drm_panel *vbt_panel_init(struct intel_dsi *intel_dsi, u16 panel_id)
/* count values in UI = (ns value) * (bitrate / (2 * 10^6))
*
* Since txddrclkhs_i is 2xUI, all the count values programmed in
- * DPHY param register are divided by 2
+ * DPHY param register are divided by 2 except GEMINILAKE where it is
+ * programmed in terms of HS byte clock so divided by 8
*
* prepare count
*/
ths_prepare_ns = max(mipi_config->ths_prepare,
mipi_config->tclk_prepare);
- prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * 2);
+ if (IS_GEMINILAKE(dev_priv))
+ prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * 8);
+ else
+ prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * 2);
/* exit zero count */
- exit_zero_cnt = DIV_ROUND_UP(
+ if (IS_GEMINILAKE(dev_priv))
+ exit_zero_cnt = DIV_ROUND_UP(
+ (ths_prepare_hszero - ths_prepare_ns) * ui_den,
+ ui_num * 8
+ );
+ else
+ exit_zero_cnt = DIV_ROUND_UP(
(ths_prepare_hszero - ths_prepare_ns) * ui_den,
ui_num * 2
);
@@ -692,13 +702,22 @@ struct drm_panel *vbt_panel_init(struct intel_dsi *intel_dsi, u16 panel_id)
exit_zero_cnt += 1;
/* clk zero count */
- clk_zero_cnt = DIV_ROUND_UP(
- (tclk_prepare_clkzero - ths_prepare_ns)
- * ui_den, 2 * ui_num);
+ if (IS_GEMINILAKE(dev_priv))
+ clk_zero_cnt = DIV_ROUND_UP(
+ (tclk_prepare_clkzero - ths_prepare_ns)
+ * ui_den, 8 * ui_num);
+ else
+ clk_zero_cnt = DIV_ROUND_UP(
+ (tclk_prepare_clkzero - ths_prepare_ns)
+ * ui_den, 2 * ui_num);
/* trail count */
tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
- trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, 2 * ui_num);
+
+ if (IS_GEMINILAKE(dev_priv))
+ trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, 8 * ui_num);
+ else
+ trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, 2 * ui_num);
if (prepare_cnt > PREPARE_CNT_MAX ||
exit_zero_cnt > EXIT_ZERO_CNT_MAX ||
--
1.9.1
More information about the Intel-gfx
mailing list