[Intel-gfx] [PATCH] drm/i915: use udelay for very small delays

[Nicholas Mc Guire]

On Thu, Dec 15, 2016 at 10:47:57AM +0200, Jani Nikula wrote:
> On Thu, 15 Dec 2016, Nicholas Mc Guire <hofrat at osadl.org> wrote:
> > usleep_range() is intended for delays in the 10us to 10ms range that need
> > good precision. a useleep_range(1, will effectively be no more than an
> > imprecise udelay with some added cache disruption as it will fire more or
> > less immediately - use udelay() here.
> >
> > Fixes: commit be4fc046bed3 ("drm/i915: add VLV DSI PLL Calculations")
> > Signed-off-by: Nicholas Mc Guire <hofrat at osadl.org>
> > ---
> >
> > Problem located by coccinelle
> >
> > The requirement of waiting at least 0.5 us is assured with the udelay(1)
> > here which should be more effective than a usleep_range() - would 
> > ndelay(500) make sense here ?
> 
> This is in the modeset path, i.e. pretty slow anyway. In this case, the
> point is not to try hard to minimize the wait, the point is to guarantee
> "at least 0.5 us" has passed. If the CPU can do something else,
> including dozing off, in the mean time, great. I think we should stick
> with usleep_range().

well in that case maybe an acceptable solution would be to set it to 
some suitable range 10,20 us ? or if not critical preferably even with a large
upper limit.

> 
> I think the question is, how do we express this in code? IMO udelay() is
> not the answer.

if the delay need to be kept short then no - then its not the answer
but usleep_ranges(1,2) I think is effectively just an inefficient version
of udelay(1), by the time the timer is setup and the task gives
up the cpu the timer would fire.

> 
> And why doesn't usleep_range() kernel-doc mention anything about the
> ranges?
> 

interesting - that might be part of the reason there are many findings
Documentation/timers/timers-howto.txt does

        SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms):
                * Use usleep_range

thx!
hofrat