[Intel-gfx] [PATCH 1/5] drm/i915/guc: Rename _setup() to _load()

[Arkadiusz Hiler]

GuC historically has two "startup" functions called _init() and _setup()

Then HuC came with it's _init() and _load().

To make naming more consistent this commit renames intel_guc_setup() to
intel_guc_load() as it it seams more fitting (it's in intel_guc_loader.c
after all).

Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
Cc: Jeff McGee <jeff.mcgee at intel.com>
Cc: Michal Winiarski <michal.winiarski at intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler at intel.com>
---
 drivers/gpu/drm/i915/i915_gem.c         |  2 +-
 drivers/gpu/drm/i915/intel_guc_loader.c | 12 ++++++------
 drivers/gpu/drm/i915/intel_uc.h         |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index f86a71d9..6af4e85 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4412,7 +4412,7 @@ i915_gem_init_hw(struct drm_i915_private *dev_priv)
 	intel_mocs_init_l3cc_table(dev_priv);
 
 	/* We can't enable contexts until all firmware is loaded */
-	ret = intel_guc_setup(dev_priv);
+	ret = intel_guc_load(dev_priv);
 	if (ret)
 		goto out;
 
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 21db697..f8b28b1 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -436,19 +436,19 @@ static int guc_hw_reset(struct drm_i915_private *dev_priv)
 }
 
 /**
- * intel_guc_setup() - finish preparing the GuC for activity
+ * intel_guc_load() - finish preparing the GuC for activity
  * @dev_priv:	i915 device private
  *
- * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Called during driver loading and also after a GPU reset.
  *
  * The main action required here it to load the GuC uCode into the device.
  * The firmware image should have already been fetched into memory by the
- * earlier call to intel_guc_init(), so here we need only check that worked,
- * and then transfer the image to the h/w.
+ * earlier call to intel_guc_init(), so here we need only check that
+ * worked, and then transfer the image to the h/w.
  *
  * Return:	non-zero code on error
  */
-int intel_guc_setup(struct drm_i915_private *dev_priv)
+int intel_guc_load(struct drm_i915_private *dev_priv)
 {
 	struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
 	const char *fw_path = guc_fw->guc_fw_path;
@@ -717,7 +717,7 @@ static void guc_fw_fetch(struct drm_i915_private *dev_priv,
  * Called early during driver load, but after GEM is initialised.
  *
  * The firmware will be transferred to the GuC's memory later,
- * when intel_guc_setup() is called.
+ * when intel_guc_load() is called.
  */
 void intel_guc_init(struct drm_i915_private *dev_priv)
 {
diff --git a/drivers/gpu/drm/i915/intel_uc.h b/drivers/gpu/drm/i915/intel_uc.h
index 11f5608..7222e6c 100644
--- a/drivers/gpu/drm/i915/intel_uc.h
+++ b/drivers/gpu/drm/i915/intel_uc.h
@@ -179,7 +179,7 @@ int intel_guc_log_control(struct intel_guc *guc, u32 control_val);
 
 /* intel_guc_loader.c */
 extern void intel_guc_init(struct drm_i915_private *dev_priv);
-extern int intel_guc_setup(struct drm_i915_private *dev_priv);
+extern int intel_guc_load(struct drm_i915_private *dev_priv);
 extern void intel_guc_fini(struct drm_i915_private *dev_priv);
 extern const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status);
 extern int intel_guc_suspend(struct drm_i915_private *dev_priv);
-- 
2.9.3