[Intel-gfx] [PATCH 01/14] drm/i915: Track visible planes in a bitmask

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Thu Dec 15 17:11:24 UTC 2016


Op 15-12-16 om 16:02 schreef Ville Syrjälä:
> On Thu, Dec 15, 2016 at 03:56:03PM +0100, Maarten Lankhorst wrote:
>> Op 12-12-16 om 21:35 schreef ville.syrjala at linux.intel.com:
>>> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>>
>>> In a lot of place we wish to know which planes on the crtc are actually
>>> visible, or how many of them there are. Let's start tracking that in a
>>> bitmask in the crtc state.
>>>
>>> We already track enabled planes (ie. ones with an fb and crtc specified by
>>> the user) but that's not quite the same thing as enabled planes may
>>> still end up being invisible due to clipping and whatnot.
>>>
>>> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>> ---
>>>  drivers/gpu/drm/i915/intel_atomic_plane.c |  6 +++
>>>  drivers/gpu/drm/i915/intel_display.c      | 79 +++++++++++++++++++++----------
>>>  drivers/gpu/drm/i915/intel_drv.h          |  3 ++
>>>  3 files changed, 64 insertions(+), 24 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
>>> index dbe9fb41ae53..7ec12edda4d4 100644
>>> --- a/drivers/gpu/drm/i915/intel_atomic_plane.c
>>> +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
>>> @@ -181,6 +181,12 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
>>>  	if (ret)
>>>  		return ret;
>>>  
>>> +	/* FIXME pre-g4x don't work like this */
>>> +	if (intel_state->base.visible)
>>> +		crtc_state->active_planes |= BIT(intel_plane->id);
>>> +	else
>>> +		crtc_state->active_planes &= ~BIT(intel_plane->id);
>>> +
>>>  	return intel_plane_atomic_calc_changes(&crtc_state->base, state);
>>>  }
>>>  
>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>>> index bc1af87789bc..3f027341b0f3 100644
>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>> @@ -2741,6 +2741,29 @@ update_state_fb(struct drm_plane *plane)
>>>  }
>>>  
>>>  static void
>>> +intel_set_plane_visible(struct intel_crtc_state *crtc_state,
>>> +			struct intel_plane_state *plane_state,
>>> +			bool visible)
>>> +{
>>> +	struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
>>> +
>>> +	plane_state->base.visible = visible;
>>> +
>>> +	/* FIXME pre-g4x don't work like this */
>>> +	if (visible) {
>>> +		crtc_state->base.plane_mask |= BIT(drm_plane_index(&plane->base));
>>> +		crtc_state->active_planes |= BIT(plane->id);
>>> +	} else {
>>> +		crtc_state->base.plane_mask &= ~BIT(drm_plane_index(&plane->base));
>>> +		crtc_state->active_planes &= ~BIT(plane->id);
>>> +	}
>>> +
>>> +	DRM_DEBUG_KMS("%s active planes 0x%x\n",
>>> +		      crtc_state->base.crtc->name,
>>> +		      crtc_state->active_planes);
>>> +}
>>> +
>>> +static void
>>>  intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
>>>  			     struct intel_initial_plane_config *plane_config)
>>>  {
>>> @@ -2798,8 +2821,9 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
>>>  	 * simplest solution is to just disable the primary plane now and
>>>  	 * pretend the BIOS never had it enabled.
>>>  	 */
>>> -	to_intel_plane_state(plane_state)->base.visible = false;
>>> -	crtc_state->plane_mask &= ~(1 << drm_plane_index(primary));
>>> +	intel_set_plane_visible(to_intel_crtc_state(crtc_state),
>>> +				to_intel_plane_state(plane_state),
>>> +				false);
>>>  	intel_pre_disable_primary_noatomic(&intel_crtc->base);
>>>  	intel_plane->disable_plane(primary, &intel_crtc->base);
>>>  
>>> @@ -2826,7 +2850,11 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
>>>  	drm_framebuffer_reference(fb);
>>>  	primary->fb = primary->state->fb = fb;
>>>  	primary->crtc = primary->state->crtc = &intel_crtc->base;
>>> -	intel_crtc->base.state->plane_mask |= (1 << drm_plane_index(primary));
>>> +
>>> +	intel_set_plane_visible(to_intel_crtc_state(intel_crtc->base.state),
>>> +				to_intel_plane_state(primary->state),
>>> +				true);
>>> +
>>>  	atomic_or(to_intel_plane(primary)->frontbuffer_bit,
>>>  		  &obj->frontbuffer_bits);
>>>  }
>>> @@ -12440,11 +12468,11 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  	struct intel_crtc_state *pipe_config = to_intel_crtc_state(crtc_state);
>>>  	struct drm_crtc *crtc = crtc_state->crtc;
>>>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>>> -	struct drm_plane *plane = plane_state->plane;
>>> +	struct intel_plane *plane = to_intel_plane(plane_state->plane);
>>>  	struct drm_device *dev = crtc->dev;
>>>  	struct drm_i915_private *dev_priv = to_i915(dev);
>>>  	struct intel_plane_state *old_plane_state =
>>> -		to_intel_plane_state(plane->state);
>>> +		to_intel_plane_state(plane->base.state);
>>>  	bool mode_changed = needs_modeset(crtc_state);
>>>  	bool was_crtc_enabled = crtc->state->active;
>>>  	bool is_crtc_enabled = crtc_state->active;
>>> @@ -12452,7 +12480,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  	struct drm_framebuffer *fb = plane_state->fb;
>>>  	int ret;
>>>  
>>> -	if (INTEL_GEN(dev_priv) >= 9 && plane->type != DRM_PLANE_TYPE_CURSOR) {
>>> +	if (INTEL_GEN(dev_priv) >= 9 && plane->id != PLANE_CURSOR) {
>>>  		ret = skl_update_scaler_plane(
>>>  			to_intel_crtc_state(crtc_state),
>>>  			to_intel_plane_state(plane_state));
>>> @@ -12476,8 +12504,10 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  	 * per-plane wm computation to the .check_plane() hook, and
>>>  	 * only combine the results from all planes in the current place?
>>>  	 */
>>> -	if (!is_crtc_enabled)
>>> +	if (!is_crtc_enabled) {
>>>  		to_intel_plane_state(plane_state)->base.visible = visible = false;
>>> +		to_intel_crtc_state(crtc_state)->active_planes &= ~BIT(plane->id);
>>> +	}
>>>  
>>>  	if (!was_visible && !visible)
>>>  		return 0;
>>> @@ -12489,13 +12519,12 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  	turn_on = visible && (!was_visible || mode_changed);
>>>  
>>>  	DRM_DEBUG_ATOMIC("[CRTC:%d:%s] has [PLANE:%d:%s] with fb %i\n",
>>> -			 intel_crtc->base.base.id,
>>> -			 intel_crtc->base.name,
>>> -			 plane->base.id, plane->name,
>>> +			 intel_crtc->base.base.id, intel_crtc->base.name,
>>> +			 plane->base.base.id, plane->base.name,
>>>  			 fb ? fb->base.id : -1);
>>>  
>>>  	DRM_DEBUG_ATOMIC("[PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
>>> -			 plane->base.id, plane->name,
>>> +			 plane->base.base.id, plane->base.name,
>>>  			 was_visible, visible,
>>>  			 turn_off, turn_on, mode_changed);
>>>  
>>> @@ -12503,15 +12532,15 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  		pipe_config->update_wm_pre = true;
>>>  
>>>  		/* must disable cxsr around plane enable/disable */
>>> -		if (plane->type != DRM_PLANE_TYPE_CURSOR)
>>> +		if (plane->id != PLANE_CURSOR)
>>>  			pipe_config->disable_cxsr = true;
>>>  	} else if (turn_off) {
>>>  		pipe_config->update_wm_post = true;
>>>  
>>>  		/* must disable cxsr around plane enable/disable */
>>> -		if (plane->type != DRM_PLANE_TYPE_CURSOR)
>>> +		if (plane->id != PLANE_CURSOR)
>>>  			pipe_config->disable_cxsr = true;
>>> -	} else if (intel_wm_need_update(plane, plane_state)) {
>>> +	} else if (intel_wm_need_update(&plane->base, plane_state)) {
>>>  		/* FIXME bollocks */
>>>  		pipe_config->update_wm_pre = true;
>>>  		pipe_config->update_wm_post = true;
>>> @@ -12523,7 +12552,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  		to_intel_crtc_state(crtc_state)->wm.need_postvbl_update = true;
>>>  
>>>  	if (visible || was_visible)
>>> -		pipe_config->fb_bits |= to_intel_plane(plane)->frontbuffer_bit;
>>> +		pipe_config->fb_bits |= plane->frontbuffer_bit;
>>>  
>>>  	/*
>>>  	 * WaCxSRDisabledForSpriteScaling:ivb
>>> @@ -12531,7 +12560,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
>>>  	 * cstate->update_wm was already set above, so this flag will
>>>  	 * take effect when we commit and program watermarks.
>>>  	 */
>>> -	if (plane->type == DRM_PLANE_TYPE_OVERLAY && IS_IVYBRIDGE(dev_priv) &&
>>> +	if (plane->id == PLANE_SPRITE0 && IS_IVYBRIDGE(dev_priv) &&
>>>  	    needs_scaling(to_intel_plane_state(plane_state)) &&
>>>  	    !needs_scaling(old_plane_state))
>>>  		pipe_config->disable_lp_wm = true;
>>> @@ -16876,15 +16905,14 @@ static bool primary_get_hw_state(struct intel_plane *plane)
>>>  /* FIXME read out full plane state for all planes */
>>>  static void readout_plane_state(struct intel_crtc *crtc)
>>>  {
>>> -	struct drm_plane *primary = crtc->base.primary;
>>> -	struct intel_plane_state *plane_state =
>>> -		to_intel_plane_state(primary->state);
>>> +	struct intel_plane *primary = to_intel_plane(crtc->base.primary);
>>> +	bool visible;
>>>  
>>> -	plane_state->base.visible = crtc->active &&
>>> -		primary_get_hw_state(to_intel_plane(primary));
>>> +	visible = crtc->active && primary_get_hw_state(primary);
>>>  
>>> -	if (plane_state->base.visible)
>>> -		crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
>>> +	intel_set_plane_visible(to_intel_crtc_state(crtc->base.state),
>>> +				to_intel_plane_state(primary->base.state),
>>> +				visible);
>>>  }
>>>  
>>>  static void intel_modeset_readout_hw_state(struct drm_device *dev)
>>> @@ -17171,7 +17199,10 @@ void intel_modeset_gem_init(struct drm_device *dev)
>>>  			c->primary->fb = NULL;
>>>  			c->primary->crtc = c->primary->state->crtc = NULL;
>>>  			update_state_fb(c->primary);
>>> -			c->state->plane_mask &= ~(1 << drm_plane_index(c->primary));
>>> +
>>> +			intel_set_plane_visible(to_intel_crtc_state(c->state),
>>> +						to_intel_plane_state(c->primary->state),
>>> +						false);
>>>  		}
>>>  	}
>>>  }
>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>>> index 8f4ddca0f521..20ba8f48bc3b 100644
>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>> @@ -669,6 +669,9 @@ struct intel_crtc_state {
>>>  
>>>  	/* Gamma mode programmed on the pipe */
>>>  	uint32_t gamma_mode;
>>> +
>>> +	/* bitmask of visible planes (enum plane_id) */
>>> +	u8 active_planes;
>> Can we change this to uint32_t 1<<drm_plane_index like the other masks?
>>
>> plane_mask, connector_mask and encoder_mask use 1 << index.
>> Perhaps name it active_planes_mask too.
> The way I use it wouldn't lend itself well to that. I don't have any
> plane structs around in a bunch of the places where this gets used.
>
Do you use this outside of 13/14? If not please drop the patch from this series. :)



More information about the Intel-gfx mailing list