[Intel-gfx] [PATCH 8/8] drm/i915/get_params: Add HuC status to getparams

[Chris Wilson]

On Fri, Dec 16, 2016 at 03:43:46PM +0100, Arkadiusz Hiler wrote:
> On Thu, Dec 15, 2016 at 10:42:53PM +0000, Chris Wilson wrote:
> > On Thu, Dec 15, 2016 at 02:29:50PM -0800, anushasr wrote:
> > > From: Peter Antoine <peter.antoine at intel.com>
> > > 
> > > This patch will allow for getparams to return the status of the HuC.
> > > As the HuC has to be validated by the GuC this patch uses the validated
> > > status to show when the HuC is loaded and ready for use. You cannot use
> > > the loaded status as with the GuC as the HuC is verified after it is
> > > loaded and is not usable until it is verified.
> > > 
> > > v2: removed the forewakes as the registers are already force-woken.
> > >      (T.Ursulin)
> > > v4: rebased.
> > > v5: rebased on top of drm-tip.
> > > v6: rebased. Removed any reference to intel_huc.h
> > > v7: rebased. Rename I915_PARAM_HAS_HUC to I915_PARAM_HUC_STATUS.
> > > Remove intel_is_huc_valid() since it is used only in one place.
> > > Put the case of I915_PARAM_HAS_HUC() in the right place.
> > > 
> > > Signed-off-by: Peter Antoine <peter.antoine at intel.com>
> > > Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/i915_drv.c         | 4 ++++
> > >  drivers/gpu/drm/i915/intel_huc_loader.c | 1 -
> > >  include/uapi/drm/i915_drm.h             | 1 +
> > >  3 files changed, 5 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> > > index 85a47c2..0bc016d 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.c
> > > +++ b/drivers/gpu/drm/i915/i915_drv.c
> > > @@ -49,6 +49,7 @@
> > >  #include "i915_trace.h"
> > >  #include "i915_vgpu.h"
> > >  #include "intel_drv.h"
> > > +#include "intel_uc.h"
> > >  
> > >  static struct drm_driver driver;
> > >  
> > > @@ -315,6 +316,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
> > >  	case I915_PARAM_MIN_EU_IN_POOL:
> > >  		value = INTEL_INFO(dev_priv)->sseu.min_eu_in_pool;
> > >  		break;
> > > +	case I915_PARAM_HUC_STATUS:
> > > +		value = I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED;
> > 
> > Same question as last time: does the device need to be awake? We know is
> > one of the GT power wells, so presumably we need an rpm_get/rpm_put as
> > well to access the register.
> > -Chris
> 
> I get:
> 
> [ 1588.570174] [drm:i915_huc_load_status_info [i915]] HUC_STATUS2 PRE  24704
> [ 1588.571285] [drm:intel_runtime_suspend [i915]] Suspending device
> [ 1588.575768] [drm:intel_runtime_suspend [i915]] Device suspended
> [ 1588.577156] [drm:i915_huc_load_status_info [i915]] HUC_STATUS2 POST 24704
> [ 1588.578259] [drm:intel_runtime_resume [i915]] Resuming device
> 
> consistently from:
> 
> value = I915_READ(HUC_STATUS2);
> DRM_DEBUG_DRIVER("HUC_STATUS2 PRE  %d\n", value);
> i915_pm_ops.runtime_suspend(dev_priv->drm.dev);
> 
> value = I915_READ(HUC_STATUS2);
> DRM_DEBUG_DRIVER("HUC_STATUS2 POST %d\n", value);
> i915_pm_ops.runtime_resume(dev_priv->drm.dev);

Also do the test with i915.mmio_debug=9999
-Chris

-- 
Chris Wilson, Intel Open Source Technology Centre