[Intel-gfx] [PATCH] drm/i915: Force VDD off on the new power seqeuencer before starting to use it
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Dec 22 11:49:39 UTC 2016
On Thu, Dec 22, 2016 at 11:39:37AM +0200, David Weinehall wrote:
> On Tue, Dec 20, 2016 at 06:51:17PM +0200, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Apparently some VLV BIOSen like to leave the VDD force bit enabled
> > even for power seqeuncers that aren't properly hooked up to any
> > port. That will result in a imbalance in the AUX power domain
> > refcount when we stat to use said power sequencer as edp_panel_vdd_on()
> > will not grab the power domain reference if it sees that the VDD is
> > already on.
> >
> > To fix this let's make sure we turn off the VDD force bit when we
> > initialize the power sequencer registers. That is, unless it's
> > being done from the init path since there we are actually
> > initializing the registers for the current power sequencer and
> > we don't want to turn VDD off needlessly as that would require
> > waiting for the power cycle delay before we turn it back on.
> >
> > This fixes the following kind of warnings:
> > WARNING: CPU: 0 PID: 123 at ../drivers/gpu/drm/i915/intel_runtime_pm.c:1455 intel_display_power_put+0x13a/0x170 [i915]()
> > WARN_ON(!power_domains->domain_use_count[domain])
> > ...
> >
> > Cc: stable at vger.kernel.org
> > Cc: Matwey V. Kornilov <matwey.kornilov at gmail.com>
> > Tested-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98695
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 42 ++++++++++++++++++++++++++++++++++-------
> > 1 file changed, 35 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 66b5bc80b781..4139122704b3 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -383,7 +383,8 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
> > struct intel_dp *intel_dp);
> > static void
> > intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
> > - struct intel_dp *intel_dp);
> > + struct intel_dp *intel_dp,
> > + bool force_disable_vdd);
> > static void
> > intel_dp_pps_init(struct drm_device *dev, struct intel_dp *intel_dp);
> >
> > @@ -567,7 +568,7 @@ vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
> >
> > /* init power sequencer on this pipe and port */
> > intel_dp_init_panel_power_sequencer(dev, intel_dp);
> > - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
> > + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, true);
> >
> > /*
> > * Even vdd force doesn't work until we've made
> > @@ -604,7 +605,7 @@ bxt_power_sequencer_idx(struct intel_dp *intel_dp)
> > * Only the HW needs to be reprogrammed, the SW state is fixed and
> > * has been setup during connector init.
> > */
> > - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
> > + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, false);
> >
> > return 0;
> > }
> > @@ -687,7 +688,7 @@ vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
> > port_name(port), pipe_name(intel_dp->pps_pipe));
> >
> > intel_dp_init_panel_power_sequencer(dev, intel_dp);
> > - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
> > + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, false);
> > }
> >
> > void intel_power_sequencer_reset(struct drm_i915_private *dev_priv)
> > @@ -2981,7 +2982,7 @@ static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
> >
> > /* init power sequencer on this pipe and port */
> > intel_dp_init_panel_power_sequencer(dev, intel_dp);
> > - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
> > + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, true);
> > }
> >
> > static void vlv_pre_enable_dp(struct intel_encoder *encoder,
> > @@ -5152,7 +5153,8 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
> >
> > static void
> > intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
> > - struct intel_dp *intel_dp)
> > + struct intel_dp *intel_dp,
> > + bool force_disable_vdd)
> > {
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > u32 pp_on, pp_off, pp_div, port_sel = 0;
> > @@ -5165,6 +5167,32 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
> >
> > intel_pps_get_registers(dev_priv, intel_dp, ®s);
> >
> > + /*
> > + * One some VLV machines the BIOS can leave the VDD
>
> On
>
> > + * enabled even on power seqeuencers which aren't
> > + * even hooked up to any port. This would mess up
>
> Remove even here
>
> > + * the power domain tracking the first time we pick
> > + * one of these power sequencers for use since
> > + * edp_panel_vdd_on() would notice that the VDD was
> > + * already on and therefore wouldn't even grab the
>
> And here.
>
> > + * power domain reference. Disable VDD first to avoid
> > + * this. This also avoids spuriously turning the VDD
> > + * on as soon as the new power seqeuencer gets
> > + * initialized.
> > + */
> > + if (force_disable_vdd) {
> > + u32 pp = ironlake_get_pp_control(intel_dp);
> > +
> > + WARN(pp & PANEL_POWER_ON, "Panel power already on\n");
>
> Wouldn't this just replace one warning with another? Or is this
> a subset of the other warning?
This should never happen. But I'd rather we get a bug report if it ever
does occur.
>
> > +
> > + if (pp & EDP_FORCE_VDD)
> > + DRM_DEBUG_KMS("VDD already on, disabling first\n");
> > +
> > + pp &= ~EDP_FORCE_VDD;
> > +
> > + I915_WRITE(regs.pp_ctrl, pp);
> > + }
> > +
> > pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
> > (seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
> > pp_off = (seq->t9 << PANEL_LIGHT_OFF_DELAY_SHIFT) |
> > @@ -5219,7 +5247,7 @@ static void intel_dp_pps_init(struct drm_device *dev,
> > vlv_initial_power_sequencer_setup(intel_dp);
> > } else {
> > intel_dp_init_panel_power_sequencer(dev, intel_dp);
> > - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
> > + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, false);
> > }
> > }
> >
> > --
> > 2.10.2
>
> Kind regards, David
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list