[Intel-gfx] [PATCH i-g-t v4] tests/kms_plane_lowres: Plane visibility after atomic modesets

Mika Kahola mika.kahola at intel.com
Fri Dec 30 12:47:38 UTC 2016


Testcase for plane visibility after atomic modesets. The idea of the test
is the following:

 - draw a blue screen with high resolution
 - enable a yellow plane, visible, in lower-left corner
 - set a new lower resolution mode (1024x768) that makes plane invisible
 - check from debugfs 'i915_display_info' that the plane is invisible
 - switch back to higher resolution mode
 - check from debugfs 'i915_display_info' that the plane is visible again
 - repeat number of iterations, default 64

v2: allow test to be run on non-Intel drivers (Daniel)
    moved test for plane visibility to as helper function (Daniel)
    moved get_vblank() function to be part of helper functions (Daniel)
    rename 'tiling' parameter as 'modifier' (Daniel)
    select a mode from a list so that the plane should be invisible.
    use default 1024x768 mode only as a fallback if decent mode has not
    been found (Daniel)
    add tiling MODE_NONE (Daniel)

v3: draw as many overlay planes as the platform supports + cursor plane
    on top of each other on lower-left corner
    skip the test if i915_display_info file is not available
    test plane visibility with igt_assert_plane_visibility() function
    drop option for multiple test iterations (Daniel Vetter)

v4: switch 'for_each_connected_output()' to
    'for_each_valid_output_on_pipe()' (Maarten)

Cc: Daniel Stone <daniel at fooishbar.org>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>

Signed-off-by: Mika Kahola <mika.kahola at intel.com>
---
 lib/igt_kms.c            | 161 ++++++++++++++++++++++
 lib/igt_kms.h            |  23 ++++
 tests/Makefile.sources   |   1 +
 tests/kms_plane_lowres.c | 344 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 529 insertions(+)
 create mode 100644 tests/kms_plane_lowres.c

diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index 5312f8d8..c823a3b 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -324,6 +324,24 @@ const char *kmstest_pipe_name(enum pipe pipe)
 }
 
 /**
+ * kmstest_pipe_to_index:
+ *@pipe: display pipe in string format
+ *
+ * Returns: index to corresponding pipe
+ */
+int kmstest_pipe_to_index(char pipe)
+{
+	if (pipe == 'A')
+		return 0;
+	else if (pipe == 'B')
+		return 1;
+	else if (pipe == 'C')
+		return 2;
+	else
+		return -EINVAL;
+}
+
+/**
  * kmstest_plane_name:
  * @plane: display plane
  *
@@ -1181,6 +1199,149 @@ int kmstest_get_crtc_idx(drmModeRes *res, uint32_t crtc_id)
 	igt_assert(false);
 }
 
+static inline uint32_t pipe_select(int pipe)
+{
+	if (pipe > 1)
+		return pipe << DRM_VBLANK_HIGH_CRTC_SHIFT;
+	else if (pipe > 0)
+		return DRM_VBLANK_SECONDARY;
+	else
+		return 0;
+}
+
+unsigned int kmstest_get_vblank(int fd, int pipe, unsigned int flags)
+{
+	union drm_wait_vblank vbl;
+
+	memset(&vbl, 0, sizeof(vbl));
+	vbl.request.type = DRM_VBLANK_RELATIVE | pipe_select(pipe) | flags;
+	if (drmIoctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl))
+		return 0;
+
+	return vbl.reply.sequence;
+}
+
+static void get_plane(char *str, int type, struct kmstest_plane *plane)
+{
+	int ret;
+	char buf[256];
+
+	plane->plane = type;
+	ret = sscanf(str + 12, "%d%*c %*s %[^n]s",
+		     &plane->id,
+		     buf);
+	igt_assert_eq(ret, 2);
+
+	ret = sscanf(buf + 9, "%4d%*c%4d%*c", &plane->pos_x, &plane->pos_y);
+	igt_assert_eq(ret, 2);
+
+	ret = sscanf(buf + 30, "%4d%*c%4d%*c", &plane->width, &plane->height);
+	igt_assert_eq(ret, 2);
+}
+
+static int parse_planes(FILE *fid, struct kmstest_plane *plane)
+{
+	char tmp[256];
+	int nplanes;
+	int ovl;
+
+	ovl = 0;
+	nplanes = 0;
+	while (fgets(tmp, 256, fid) != NULL) {
+		igt_assert_neq(nplanes, IGT_MAX_PLANES);
+		if (strstr(tmp, "type=PRI") != NULL) {
+			get_plane(tmp, IGT_PLANE_PRIMARY, &plane[nplanes]);
+			nplanes++;
+		} else if (strstr(tmp, "type=OVL") != NULL) {
+			get_plane(tmp, IGT_PLANE_2 + ovl, &plane[nplanes]);
+			ovl++;
+			nplanes++;
+		} else if (strstr(tmp, "type=CUR") != NULL) {
+			get_plane(tmp, IGT_PLANE_CURSOR, &plane[nplanes]);
+			nplanes++;
+			break;
+		}
+	}
+
+	return nplanes;
+}
+
+static void parse_crtc(char *info, struct kmstest_crtc *crtc)
+{
+	char buf[256];
+	int ret;
+	char pipe;
+
+	ret = sscanf(info + 4, "%d%*c %*s %c%*c %*s %s%*c",
+		     &crtc->id, &pipe, buf);
+	igt_assert_eq(ret, 3);
+
+	crtc->pipe = kmstest_pipe_to_index(pipe);
+	igt_assert(crtc->pipe >= 0);
+
+	ret = sscanf(buf + 6, "%d%*c%d%*c",
+		     &crtc->width, &crtc->height);
+	igt_assert_eq(ret, 2);
+}
+
+void kmstest_get_crtc(enum pipe pipe, struct kmstest_crtc *crtc)
+{
+	char tmp[256];
+	FILE *fid;
+	const char *mode = "r";
+	int ncrtc;
+	int line;
+
+	fid = igt_debugfs_fopen("i915_display_info", mode);
+
+	igt_skip_on(fid == NULL);
+
+	ncrtc = 0;
+	line = 0;
+	while (fgets(tmp, 256, fid) != NULL) {
+		if ((strstr(tmp, "CRTC") != NULL) && (line > 0)) {
+			if (strstr(tmp, "active=yes") != NULL) {
+				crtc->active = true;
+				parse_crtc(tmp, crtc);
+				crtc->nplanes = parse_planes(fid, crtc->plane);
+
+				if (crtc->pipe != pipe)
+					crtc = NULL;
+				else
+					ncrtc++;
+			}
+		}
+
+		line++;
+	}
+
+	fclose(fid);
+
+	igt_skip_on(ncrtc == 0);
+}
+
+void igt_assert_plane_visible(enum pipe pipe, bool visibility)
+{
+	struct kmstest_crtc crtc;
+	int i;
+	bool visible;
+
+	kmstest_get_crtc(pipe, &crtc);
+
+	visible = true;
+	for (i = IGT_PLANE_2; i < crtc.nplanes; i++) {
+		if (crtc.plane[i].pos_x > crtc.width) {
+			visible = false;
+			break;
+		} else if (crtc.plane[i].pos_y > crtc.height) {
+			visible = false;
+			break;
+		}
+	}
+
+	igt_assert_eq(visible, visibility);
+}
+
 /*
  * A small modeset API
  */
diff --git a/lib/igt_kms.h b/lib/igt_kms.h
index 5234f6c..2da4ad9 100644
--- a/lib/igt_kms.h
+++ b/lib/igt_kms.h
@@ -57,6 +57,7 @@ enum pipe {
         I915_MAX_PIPES
 };
 const char *kmstest_pipe_name(enum pipe pipe);
+int kmstest_pipe_to_index(char pipe);
 
 /* We namespace this enum to not conflict with the Android i915_drm.h */
 enum igt_plane {
@@ -132,6 +133,25 @@ struct kmstest_connector_config {
 	unsigned valid_crtc_idx_mask;
 };
 
+struct kmstest_plane {
+	int id;
+	int plane;
+	int pos_x;
+	int pos_y;
+	int width;
+	int height;
+};
+
+struct kmstest_crtc {
+	int id;
+	int pipe;
+	bool active;
+	int width;
+	int height;
+	int nplanes;
+	struct kmstest_plane plane[IGT_MAX_PLANES];
+};
+
 /**
  * kmstest_force_connector_state:
  * @FORCE_CONNECTOR_UNSPECIFIED: Unspecified
@@ -177,6 +197,9 @@ uint32_t kmstest_dumb_create(int fd, int width, int height, int bpp,
 
 void *kmstest_dumb_map_buffer(int fd, uint32_t handle, uint64_t size,
 			      unsigned prot);
+unsigned int kmstest_get_vblank(int fd, int pipe, unsigned int flags);
+void kmstest_get_crtc(enum pipe pipe, struct kmstest_crtc *crtc);
+void igt_assert_plane_visible(enum pipe pipe, bool visibility);
 
 /*
  * A small modeset API
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index f6e08d6..6316ea6 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -111,6 +111,7 @@ TESTS_progs_M = \
 	kms_pipe_crc_basic \
 	kms_plane \
 	kms_plane_multiple \
+	kms_plane_lowres \
 	kms_properties \
 	kms_psr_sink_crc \
 	kms_render \
diff --git a/tests/kms_plane_lowres.c b/tests/kms_plane_lowres.c
new file mode 100644
index 0000000..21f8282
--- /dev/null
+++ b/tests/kms_plane_lowres.c
@@ -0,0 +1,344 @@
+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "igt.h"
+#include "drmtest.h"
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+
+IGT_TEST_DESCRIPTION("Test atomic mode setting with a plane by switching between high and low resolutions");
+
+#define MAX_CRCS          1
+#define SIZE            256
+#define LOOP_FOREVER     -1
+
+typedef struct {
+	int drm_fd;
+	igt_display_t display;
+	igt_pipe_crc_t *pipe_crc;
+	igt_plane_t *plane[IGT_MAX_PLANES];
+	struct igt_fb fb[IGT_MAX_PLANES];
+} data_t;
+
+static drmModeModeInfo
+get_lowres_mode(int drmfd, drmModeModeInfo *mode_default)
+{
+	drmModeRes *mode_resources = drmModeGetResources(drmfd);
+	drmModeModeInfo mode;
+	drmModeModeInfo std_1024_mode = {
+		.clock = 65000,
+		.hdisplay = 1024,
+		.hsync_start = 1048,
+		.hsync_end = 1184,
+		.htotal = 1344,
+		.hskew = 0,
+		.vdisplay = 768,
+		.vsync_start = 771,
+		.vsync_end = 777,
+		.vtotal = 806,
+		.vscan = 0,
+		.vrefresh = 60,
+		.flags = 0xA,
+		.type = 0x40,
+		.name = "Custom 1024x768",
+	};
+	bool found;
+	int limit = mode_default->vdisplay-SIZE;
+	int i, j;
+
+	if (!mode_resources) {
+		igt_warn("drmModeGetResources failed: %s\n", strerror(errno));
+		return std_1024_mode;
+	}
+
+	found = false;
+	for (i = 0; i < mode_resources->count_connectors; i++) {
+		drmModeConnector *connector;
+
+		connector = drmModeGetConnectorCurrent(drmfd,
+						       mode_resources->connectors[i]);
+		if (!connector) {
+			igt_warn("could not get connector %i: %s\n",
+				 mode_resources->connectors[i], strerror(errno));
+			continue;
+		}
+
+		if (!connector->count_modes)
+			continue;
+
+		for (j = 0; j < connector->count_modes; j++) {
+			mode = connector->modes[j];
+			if (mode.vdisplay < limit) {
+				found = true;
+				break;
+			}
+		}
+
+		drmModeFreeConnector(connector);
+	}
+
+	drmModeFreeResources(mode_resources);
+
+	if (!found)
+		return std_1024_mode;
+
+	return mode;
+}
+
+static void
+test_init(data_t *data, enum pipe pipe)
+{
+	data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+}
+
+static void
+test_fini(data_t *data, igt_output_t *output)
+{
+	/* restore original mode */
+	igt_output_override_mode(output, NULL);
+
+	for (int i = 0; i < 2; i++)
+		igt_plane_set_fb(data->plane[i], NULL);
+
+	/* reset the constraint on the pipe */
+	igt_output_set_pipe(output, PIPE_ANY);
+
+	igt_pipe_crc_free(data->pipe_crc);
+}
+
+static int
+display_commit_mode(data_t *data, enum pipe pipe, int flags, igt_crc_t *crc)
+{
+	char buf[256];
+	struct drm_event *e = (void *)buf;
+	unsigned int vblank_start, vblank_stop;
+	int n, ret;
+
+	vblank_start = kmstest_get_vblank(data->display.drm_fd, pipe,
+					  DRM_VBLANK_NEXTONMISS);
+
+	ret = igt_display_try_commit_atomic(&data->display,
+					    flags,
+					    NULL);
+	igt_skip_on(ret != 0);
+
+	igt_set_timeout(1, "Stuck on page flip");
+	ret = read(data->display.drm_fd, buf, sizeof(buf));
+	igt_assert(ret >= 0);
+
+	vblank_stop = kmstest_get_vblank(data->display.drm_fd, pipe, 0);
+	igt_assert_eq(e->type, DRM_EVENT_FLIP_COMPLETE);
+	igt_reset_timeout();
+
+	n = igt_pipe_crc_get_crcs(data->pipe_crc, vblank_stop - vblank_start,
+				  &crc);
+	igt_assert_eq(n, vblank_stop - vblank_start);
+
+	return n;
+}
+
+static void
+check_mode(drmModeModeInfo *mode1, drmModeModeInfo *mode2)
+{
+	igt_assert_eq(mode1->hdisplay, mode2->hdisplay);
+	igt_assert_eq(mode1->vdisplay, mode2->vdisplay);
+	igt_assert_eq(mode1->vrefresh, mode2->vrefresh);
+}
+
+static drmModeModeInfo *
+test_setup(data_t *data, enum pipe pipe, uint64_t modifier, int flags,
+	   igt_output_t *output)
+{
+	struct kmstest_crtc crtc;
+	drmModeModeInfo *mode;
+	int size;
+	int i, x, y;
+
+	igt_output_set_pipe(output, pipe);
+
+	kmstest_get_crtc(pipe, &crtc);
+	igt_skip_on(crtc.nplanes > data->display.pipes[pipe].n_planes);
+	igt_skip_on(crtc.nplanes == 0);
+
+	for (i = 0; i < crtc.nplanes; i++)
+		data->plane[i] = igt_output_get_plane(output, crtc.plane[i].plane);
+
+	mode = igt_output_get_mode(output);
+
+	igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+			    DRM_FORMAT_XRGB8888,
+			    modifier,
+			    0.0, 0.0, 1.0,
+			    &data->fb[0]);
+
+	igt_plane_set_fb(data->plane[0], &data->fb[0]);
+
+	/* yellow sprite plane in lower left corner */
+	for (i = IGT_PLANE_2; i < crtc.nplanes; i++) {
+		if (data->plane[i]->is_cursor)
+			size = 64;
+		else
+			size = SIZE;
+
+		x = 0;
+		y = mode->vdisplay - size;
+
+		igt_create_color_fb(data->drm_fd,
+				    size, size,
+				    data->plane[i]->is_cursor ? DRM_FORMAT_ARGB8888 : DRM_FORMAT_XRGB8888,
+				    data->plane[i]->is_cursor ? LOCAL_DRM_FORMAT_MOD_NONE : modifier,
+				    1.0, 1.0, 0.0,
+				    &data->fb[i]);
+
+		igt_plane_set_position(data->plane[i], x, y);
+		igt_plane_set_fb(data->plane[i], &data->fb[i]);
+	}
+
+	return mode;
+}
+
+static void
+test_plane_position_with_output(data_t *data, enum pipe pipe,
+				igt_output_t *output, uint64_t modifier)
+{
+	igt_crc_t *crc_hires1, *crc_hires2;
+	igt_crc_t *crc_lowres;
+	drmModeModeInfo mode_lowres;
+	drmModeModeInfo *mode1, *mode2, *mode3;
+	int ret, n;
+	int flags = DRM_MODE_PAGE_FLIP_EVENT | DRM_MODE_ATOMIC_ALLOW_MODESET;
+
+	igt_info("Testing connector %s using pipe %s\n",
+		 igt_output_name(output), kmstest_pipe_name(pipe));
+
+	test_init(data, pipe);
+
+	mode1 = test_setup(data, pipe, modifier, flags, output);
+
+	mode_lowres = get_lowres_mode(data->drm_fd, mode1);
+
+	igt_pipe_crc_start(data->pipe_crc);
+	ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
+	igt_skip_on(ret != 0);
+
+	n = igt_pipe_crc_get_crcs(data->pipe_crc, 1, &crc_hires1);
+	igt_assert_eq(1, n);
+
+	igt_assert_plane_visible(pipe, true);
+
+	/* switch to lower resolution */
+	igt_output_override_mode(output, &mode_lowres);
+	igt_output_set_pipe(output, pipe);
+
+	mode2 = igt_output_get_mode(output);
+
+	check_mode(&mode_lowres, mode2);
+
+	display_commit_mode(data, pipe, flags, crc_lowres);
+
+	igt_assert_plane_visible(pipe, false);
+
+	/* switch back to higher resolution */
+	igt_output_override_mode(output, NULL);
+	igt_output_set_pipe(output, pipe);
+
+	mode3 = igt_output_get_mode(output);
+
+	check_mode(mode1, mode3);
+
+	display_commit_mode(data, pipe, flags, crc_hires2);
+
+	igt_assert_plane_visible(pipe, true);
+
+	igt_pipe_crc_stop(data->pipe_crc);
+
+	test_fini(data, output);
+}
+
+static void
+test_plane_position(data_t *data, enum pipe pipe, uint64_t modifier)
+{
+	igt_output_t *output;
+	int connected_outs;
+
+	igt_require(data->display.is_atomic);
+	igt_skip_on(pipe >= data->display.n_pipes);
+
+	connected_outs = 0;
+	for_each_valid_output_on_pipe(&data->display, pipe, output) {
+		test_plane_position_with_output(data, pipe, output, modifier);
+		connected_outs++;
+	}
+
+	igt_skip_on(connected_outs == 0);
+
+}
+
+static void
+run_tests_for_pipe(data_t *data, enum pipe pipe)
+{
+	igt_subtest_f("pipe-%s-tiling-none",
+		      kmstest_pipe_name(pipe))
+		test_plane_position(data, pipe, LOCAL_DRM_FORMAT_MOD_NONE);
+
+	igt_subtest_f("pipe-%s-tiling-x",
+		      kmstest_pipe_name(pipe))
+		test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_X_TILED);
+
+	igt_subtest_f("pipe-%s-tiling-y",
+		      kmstest_pipe_name(pipe))
+		test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Y_TILED);
+
+	igt_subtest_f("pipe-%s-tiling-yf",
+		      kmstest_pipe_name(pipe))
+		test_plane_position(data, pipe, LOCAL_I915_FORMAT_MOD_Yf_TILED);
+}
+
+static data_t data;
+
+igt_main
+{
+	igt_skip_on_simulation();
+
+	igt_fixture {
+		data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+
+		kmstest_set_vt_graphics_mode();
+
+		igt_require_pipe_crc();
+		igt_display_init(&data.display, data.drm_fd);
+	}
+
+	for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
+		run_tests_for_pipe(&data, pipe);
+
+	igt_fixture {
+		igt_display_fini(&data.display);
+	}
+
+	igt_exit();
+}
-- 
2.7.4



More information about the Intel-gfx mailing list