[Intel-gfx] [PATCH 1/2] drm/i915/BXT: Fixed COS blanking issue
Ramalingam C
ramalingam.c at intel.com
Wed Feb 3 12:20:32 UTC 2016
On Wednesday 03 February 2016 07:19 AM, Thulasimani, Sivakumar wrote:
>
>
> On 2/2/2016 11:24 PM, Ramalingam C wrote:
>> From: Uma Shankar <uma.shankar at intel.com>
>>
>> During Charging OS mode, mipi display was blanking.This is
>> because during driver load, though encoder, connector were
>> active but crtc returned inactive. This caused sanitize
>> function to disable the DSI panel. In AOS, this is fine
>> since HWC will do a modeset and crtc, connector, encoder
>> mapping will be restored. But in COS, no modeset is called,
>> it just calls DPMS ON/OFF.
>>
>> This is fine on BYT/CHT since transcoder is common b/w
>> all encoders. But for BXT, there is a separate mipi
>> transcoder. Hence this needs special handling for BXT.
>>
>> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
>> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_display.c | 107
>> ++++++++++++++++++++++++++++++++--
>> 1 file changed, 101 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_display.c
>> b/drivers/gpu/drm/i915/intel_display.c
>> index a66220a..f8685f5 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -7814,6 +7814,69 @@ static void intel_set_pipe_timings(struct
>> intel_crtc *intel_crtc)
>> (intel_crtc->config->pipe_src_h - 1));
>> }
>> +static void intel_get_dsi_pipe_timings(struct intel_crtc *crtc,
>> + struct intel_crtc_state *pipe_config)
>> +{
>> + struct drm_device *dev = crtc->base.dev;
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
>> + struct intel_encoder *encoder;
>> + uint32_t tmp;
>> +
>> + tmp = I915_READ(HTOTAL(cpu_transcoder));
>> + pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
>> + pipe_config->base.adjusted_mode.crtc_htotal =
>> + ((tmp >> 16) & 0xffff) + 1;
>> + tmp = I915_READ(HBLANK(cpu_transcoder));
>> + pipe_config->base.adjusted_mode.crtc_hblank_start = (tmp &
>> 0xffff) + 1;
>> + pipe_config->base.adjusted_mode.crtc_hblank_end =
>> + ((tmp >> 16) & 0xffff) + 1;
>> + tmp = I915_READ(HSYNC(cpu_transcoder));
>> + pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp &
>> 0xffff) + 1;
>> + pipe_config->base.adjusted_mode.crtc_hsync_end =
>> + ((tmp >> 16) & 0xffff) + 1;
>> +
>> + tmp = I915_READ(VBLANK(cpu_transcoder));
>> + pipe_config->base.adjusted_mode.crtc_vblank_start = (tmp &
>> 0xffff) + 1;
>> + pipe_config->base.adjusted_mode.crtc_vblank_end =
>> + ((tmp >> 16) & 0xffff) + 1;
>> + tmp = I915_READ(VSYNC(cpu_transcoder));
>> + pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp &
>> 0xffff) + 1;
>> + pipe_config->base.adjusted_mode.crtc_vsync_end =
>> + ((tmp >> 16) & 0xffff) + 1;
>> +
>> + if (I915_READ(PIPECONF(cpu_transcoder)) &
>> PIPECONF_INTERLACE_MASK) {
>> + pipe_config->base.adjusted_mode.flags |=
>> + DRM_MODE_FLAG_INTERLACE;
>> + pipe_config->base.adjusted_mode.crtc_vtotal += 1;
>> + pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
>> + }
>> +
>> +
>> + for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
>> + struct intel_dsi *intel_dsi =
>> + enc_to_intel_dsi(&encoder->base);
>> + enum port port;
>> +
>> + pipe_config->pipe_bpp = intel_dsi->dsi_bpp;
>> + for_each_dsi_port(port, intel_dsi->ports) {
>> + pipe_config->base.adjusted_mode.crtc_hdisplay =
>> + I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
>> + pipe_config->base.adjusted_mode.crtc_vdisplay =
>> + I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
>> + pipe_config->base.adjusted_mode.crtc_vtotal =
>> + I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
>> + }
>> + }
>> +
>> + tmp = I915_READ(PIPESRC(crtc->pipe));
>> + pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
>> + pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
>> +
>> + pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
>> + pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
>> +}
>> +
>> static void intel_get_pipe_timings(struct intel_crtc *crtc,
>> struct intel_crtc_state *pipe_config)
>> {
>> @@ -9969,6 +10032,7 @@ static bool haswell_get_pipe_config(struct
>> intel_crtc *crtc,
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> enum intel_display_power_domain pfit_domain;
>> uint32_t tmp;
>> + bool is_dsi = false;
>> if (!intel_display_power_is_enabled(dev_priv,
>> POWER_DOMAIN_PIPE(crtc->pipe)))
>> @@ -9999,17 +10063,48 @@ static bool haswell_get_pipe_config(struct
>> intel_crtc *crtc,
>> pipe_config->cpu_transcoder = TRANSCODER_EDP;
>> }
>> + if (dev_priv->vbt.has_mipi) {
> shouldn't the above check for bxt too ? since the section inside is
> only for bxt ?
Thanks siva. Will take care of this in the next version of the patch.
> regards,
> Sivakumar
>> + enum port port_num = (dev_priv->vbt.dsi.port == DVO_PORT_MIPIA)
>> + ? PORT_A : PORT_C;
>> + uint32_t dsi_ctrl = I915_READ(MIPI_CTRL(port_num));
>> +
>> + tmp = I915_READ(BXT_MIPI_PORT_CTRL(port_num));
>> + if (tmp & DPI_ENABLE) {
>> + enum pipe trans_dsi_pipe;
>> +
>> + switch (dsi_ctrl & BXT_PIPE_SELECT_MASK) {
>> + default:
>> + WARN(1, "unknown pipe linked to dsi transcoder\n");
>> + return false;
>> + case BXT_PIPE_SELECT_A:
>> + trans_dsi_pipe = PIPE_A;
>> + break;
>> + case BXT_PIPE_SELECT_B:
>> + trans_dsi_pipe = PIPE_B;
>> + break;
>> + case BXT_PIPE_SELECT_C:
>> + trans_dsi_pipe = PIPE_C;
>> + break;
>> + }
>> +
>> + if (trans_dsi_pipe == crtc->pipe)
>> + is_dsi = true;
>> + }
>> + }
>> +
>> if (!intel_display_power_is_enabled(dev_priv,
>> POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
>> return false;
>> - tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
>> - if (!(tmp & PIPECONF_ENABLE))
>> - return false;
>> -
>> - haswell_get_ddi_port_state(crtc, pipe_config);
>> + if (!is_dsi) {
>> + tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
>> + if (!(tmp & PIPECONF_ENABLE))
>> + return false;
>> - intel_get_pipe_timings(crtc, pipe_config);
>> + haswell_get_ddi_port_state(crtc, pipe_config);
>> + intel_get_pipe_timings(crtc, pipe_config);
>> + } else
>> + intel_get_dsi_pipe_timings(crtc, pipe_config);
>> if (INTEL_INFO(dev)->gen >= 9) {
>> skl_init_scalers(dev, crtc, pipe_config);
>
--
Thanks,
--Ram
More information about the Intel-gfx
mailing list