[Intel-gfx] [PATCH 1/6] drm/i915: Use atomic state to obtain load detection crtc.

Daniel Vetter daniel at ffwll.ch
Thu Feb 11 08:56:49 UTC 2016


On Mon, Feb 01, 2016 at 02:43:57PM +0100, Maarten Lankhorst wrote:
> Instead of restoring dpms and a flag for whether a temp fb is allocated duplicate
> the old plane_state and crtc_state, and restore the members we potentially touched.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>

Do we have the load-detect igt testcase now in the BAT set? We've broken
this way too many times to not do that. Imo that should be done before
merging this fix.
-Daniel

> ---
>  drivers/gpu/drm/i915/intel_display.c | 128 ++++++++++++++++++++---------------
>  drivers/gpu/drm/i915/intel_drv.h     |   4 +-
>  2 files changed, 76 insertions(+), 56 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4d8c9f7857db..0702ce8ec36a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10361,6 +10361,7 @@ mode_fits_in_fbdev(struct drm_device *dev,
>  	if (obj->base.size < mode->vdisplay * fb->pitches[0])
>  		return NULL;
>  
> +	drm_framebuffer_reference(fb);
>  	return fb;
>  #else
>  	return NULL;
> @@ -10426,6 +10427,9 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
>  		      encoder->base.id, encoder->name);
>  
>  retry:
> +	old->old_pipe_config = NULL;
> +	old->old_plane_state = NULL;
> +
>  	ret = drm_modeset_lock(&config->connection_mutex, ctx);
>  	if (ret)
>  		goto fail;
> @@ -10441,24 +10445,15 @@ retry:
>  	 */
>  
>  	/* See if we already have a CRTC for this connector */
> -	if (encoder->crtc) {
> -		crtc = encoder->crtc;
> +	if (connector->state->crtc) {
> +		crtc = connector->state->crtc;
>  
>  		ret = drm_modeset_lock(&crtc->mutex, ctx);
>  		if (ret)
>  			goto fail;
> -		ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
> -		if (ret)
> -			goto fail;
> -
> -		old->dpms_mode = connector->dpms;
> -		old->load_detect_temp = false;
>  
>  		/* Make sure the crtc and connector are running */
> -		if (connector->dpms != DRM_MODE_DPMS_ON)
> -			connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
> -
> -		return true;
> +		goto found;
>  	}
>  
>  	/* Find an unused one (if possible) */
> @@ -10466,8 +10461,15 @@ retry:
>  		i++;
>  		if (!(encoder->possible_crtcs & (1 << i)))
>  			continue;
> -		if (possible_crtc->state->enable)
> +
> +		ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
> +		if (ret)
> +			goto fail;
> +
> +		if (possible_crtc->state->enable) {
> +			drm_modeset_unlock(&possible_crtc->mutex);
>  			continue;
> +		}
>  
>  		crtc = possible_crtc;
>  		break;
> @@ -10481,17 +10483,19 @@ retry:
>  		goto fail;
>  	}
>  
> -	ret = drm_modeset_lock(&crtc->mutex, ctx);
> -	if (ret)
> -		goto fail;
> +found:
> +	intel_crtc = to_intel_crtc(crtc);
> +
>  	ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
>  	if (ret)
>  		goto fail;
>  
> -	intel_crtc = to_intel_crtc(crtc);
> -	old->dpms_mode = connector->dpms;
> -	old->load_detect_temp = true;
> -	old->release_fb = NULL;
> +	old->old_pipe_config = intel_crtc_duplicate_state(crtc);
> +	old->old_plane_state = intel_plane_duplicate_state(crtc->primary);
> +	if (!old->old_pipe_config || !old->old_plane_state) {
> +		ret = -ENOMEM;
> +		goto fail;
> +	}
>  
>  	state = drm_atomic_state_alloc(dev);
>  	if (!state)
> @@ -10505,7 +10509,9 @@ retry:
>  		goto fail;
>  	}
>  
> -	connector_state->crtc = crtc;
> +	ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
> +	if (ret)
> +		goto fail;
>  
>  	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>  	if (IS_ERR(crtc_state)) {
> @@ -10529,7 +10535,6 @@ retry:
>  	if (fb == NULL) {
>  		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
>  		fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
> -		old->release_fb = fb;
>  	} else
>  		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
>  	if (IS_ERR(fb)) {
> @@ -10541,15 +10546,16 @@ retry:
>  	if (ret)
>  		goto fail;
>  
> -	drm_mode_copy(&crtc_state->base.mode, mode);
> +	drm_framebuffer_unreference(fb);
> +
> +	ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
> +	if (ret)
> +		goto fail;
>  
>  	if (drm_atomic_commit(state)) {
>  		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
> -		if (old->release_fb)
> -			old->release_fb->funcs->destroy(old->release_fb);
>  		goto fail;
>  	}
> -	crtc->primary->crtc = crtc;
>  
>  	/* let the connector get through one full cycle before testing */
>  	intel_wait_for_vblank(dev, intel_crtc->pipe);
> @@ -10559,6 +10565,12 @@ fail:
>  	drm_atomic_state_free(state);
>  	state = NULL;
>  
> +	if (old->old_pipe_config)
> +		intel_crtc_destroy_state(crtc, old->old_pipe_config);
> +
> +	if (old->old_plane_state)
> +		intel_plane_destroy_state(crtc->primary, old->old_plane_state);
> +
>  	if (ret == -EDEADLK) {
>  		drm_modeset_backoff(ctx);
>  		goto retry;
> @@ -10575,61 +10587,69 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
>  	struct intel_encoder *intel_encoder =
>  		intel_attached_encoder(connector);
>  	struct drm_encoder *encoder = &intel_encoder->base;
> -	struct drm_crtc *crtc = encoder->crtc;
> +	struct drm_crtc *crtc = connector->state->crtc;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>  	struct drm_atomic_state *state;
>  	struct drm_connector_state *connector_state;
>  	struct intel_crtc_state *crtc_state;
> +	struct drm_plane_state *plane_state;
>  	int ret;
>  
>  	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
>  		      connector->base.id, connector->name,
>  		      encoder->base.id, encoder->name);
>  
> -	if (old->load_detect_temp) {
> -		state = drm_atomic_state_alloc(dev);
> -		if (!state)
> -			goto fail;
> +	if (!old->old_pipe_config)
> +		return;
>  
> -		state->acquire_ctx = ctx;
> +	state = drm_atomic_state_alloc(dev);
> +	if (!state)
> +		goto fail;
>  
> -		connector_state = drm_atomic_get_connector_state(state, connector);
> -		if (IS_ERR(connector_state))
> -			goto fail;
> +	state->acquire_ctx = ctx;
>  
> -		crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
> -		if (IS_ERR(crtc_state))
> -			goto fail;
> +	connector_state = drm_atomic_get_connector_state(state, connector);
> +	if (IS_ERR(connector_state))
> +		goto fail;
>  
> -		connector_state->crtc = NULL;
> +	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
> +	if (IS_ERR(crtc_state))
> +		goto fail;
>  
> -		crtc_state->base.enable = crtc_state->base.active = false;
> +	plane_state = drm_atomic_get_plane_state(state, crtc->primary);
> +	if (IS_ERR(plane_state))
> +		goto fail;
>  
> -		ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
> -						      0, 0);
> +	if (!old->old_pipe_config->enable) {
> +		ret = drm_atomic_set_crtc_for_connector(connector_state, NULL);
>  		if (ret)
>  			goto fail;
> +	}
>  
> -		ret = drm_atomic_commit(state);
> -		if (ret)
> -			goto fail;
> +	crtc_state->base.enable = old->old_pipe_config->enable;
> +	crtc_state->base.active = old->old_pipe_config->active;
>  
> -		if (old->release_fb) {
> -			drm_framebuffer_unregister_private(old->release_fb);
> -			drm_framebuffer_unreference(old->release_fb);
> -		}
> +	drm_atomic_set_fb_for_plane(plane_state, old->old_plane_state->fb);
> +	ret = drm_atomic_set_crtc_for_plane(plane_state, old->old_plane_state->crtc);
> +	if (ret)
> +		goto fail;
>  
> -		return;
> -	}
> +	old->old_plane_state->state = plane_state->state;
> +	*plane_state = *old->old_plane_state;
>  
> -	/* Switch crtc and encoder back off if necessary */
> -	if (old->dpms_mode != DRM_MODE_DPMS_ON)
> -		connector->funcs->dpms(connector, old->dpms_mode);
> +	ret = drm_atomic_commit(state);
> +	if (ret)
> +		goto fail;
>  
> +	intel_plane_destroy_state(crtc->primary, old->old_plane_state);
> +	intel_crtc_destroy_state(crtc, old->old_pipe_config);
>  	return;
> +
>  fail:
>  	DRM_DEBUG_KMS("Couldn't release load detect pipe.\n");
>  	drm_atomic_state_free(state);
> +	intel_plane_destroy_state(crtc->primary, old->old_plane_state);
> +	intel_crtc_destroy_state(crtc, old->old_pipe_config);
>  }
>  
>  static int i9xx_pll_refclk(struct drm_device *dev,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 93ba14a3bb76..eeda7d02a4f7 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -913,8 +913,8 @@ struct intel_unpin_work {
>  
>  struct intel_load_detect_pipe {
>  	struct drm_framebuffer *release_fb;
> -	bool load_detect_temp;
> -	int dpms_mode;
> +	struct drm_crtc_state *old_pipe_config;
> +	struct drm_plane_state *old_plane_state;
>  };
>  
>  static inline struct intel_encoder *
> -- 
> 2.1.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the Intel-gfx mailing list