[Intel-gfx] [PATCH 08/12] drm/i915: ensure the HW is powered when accessing the CRC HW block
Imre Deak
imre.deak at intel.com
Fri Feb 12 16:55:17 UTC 2016
The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index ec0c2a05e..9e19cf0 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -825,8 +825,11 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
}
for_each_pipe(dev_priv, pipe) {
- if (!intel_display_power_is_enabled(dev_priv,
- POWER_DOMAIN_PIPE(pipe))) {
+ enum intel_display_power_domain power_domain;
+
+ power_domain = POWER_DOMAIN_PIPE(pipe);
+ if (!intel_display_power_get_if_enabled(dev_priv,
+ power_domain)) {
seq_printf(m, "Pipe %c power disabled\n",
pipe_name(pipe));
continue;
@@ -840,6 +843,8 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
seq_printf(m, "Pipe %c IER:\t%08x\n",
pipe_name(pipe),
I915_READ(GEN8_DE_PIPE_IER(pipe)));
+
+ intel_display_power_put(dev_priv, power_domain);
}
seq_printf(m, "Display Engine port interrupt mask:\t%08x\n",
@@ -4004,6 +4009,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
struct intel_pipe_crc *pipe_crc = &dev_priv->pipe_crc[pipe];
struct intel_crtc *crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev,
pipe));
+ enum intel_display_power_domain power_domain;
u32 val = 0; /* shut up gcc */
int ret;
@@ -4014,7 +4020,8 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
if (pipe_crc->source && source)
return -EINVAL;
- if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PIPE(pipe))) {
+ power_domain = POWER_DOMAIN_PIPE(pipe);
+ if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) {
DRM_DEBUG_KMS("Trying to capture CRC while pipe is off\n");
return -EIO;
}
@@ -4031,7 +4038,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
ret = ivb_pipe_crc_ctl_reg(dev, pipe, &source, &val);
if (ret != 0)
- return ret;
+ goto out;
/* none -> real source transition */
if (source) {
@@ -4043,8 +4050,10 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
entries = kcalloc(INTEL_PIPE_CRC_ENTRIES_NR,
sizeof(pipe_crc->entries[0]),
GFP_KERNEL);
- if (!entries)
- return -ENOMEM;
+ if (!entries) {
+ ret = -ENOMEM;
+ goto out;
+ }
/*
* When IPS gets enabled, the pipe CRC changes. Since IPS gets
@@ -4100,7 +4109,12 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
hsw_enable_ips(crtc);
}
- return 0;
+ ret = 0;
+
+out:
+ intel_display_power_put(dev_priv, power_domain);
+
+ return ret;
}
/*
--
2.5.0
More information about the Intel-gfx
mailing list