[Intel-gfx] [PATCH 6/6] drm/i915: Try to fix CRT port clock limits

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

LPT/WPT-H are limited to max 180 MHz CRT dotclock. Most other platforms
have a limit of 350 MHz. Supposedly gen3 and gen4 go up to 400 MHz.

VLV is a bit special since the docs are poor. Supposedly the DAC
would be good up to 355 MHz, but currently we limit the DPLL to
270 MHz, so we'll have to limit the port clock to the same unless
we change the DPLL limits.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 08964bbd7c82..6bdd4f4310f1 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -220,18 +220,26 @@ intel_crt_mode_valid(struct drm_connector *connector,
 {
 	struct drm_device *dev = connector->dev;
 	int max_dotclk = to_i915(dev)->max_dotclk_freq;
+	int max_clock;
 
-	int max_clock = 0;
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
 	if (mode->clock < 25000)
 		return MODE_CLOCK_LOW;
 
-	if (IS_GEN2(dev))
-		max_clock = 350000;
-	else
+	if (HAS_PCH_LPT(dev))
+		max_clock = 180000;
+	else if (IS_VALLEYVIEW(dev))
+		/*
+		 * 270 MHz due to current DPLL limits,
+		 * DAC limit supposedly 355 MHz.
+		 */
+		max_clock = 270000;
+	else if (IS_GEN3(dev) || IS_GEN4(dev))
 		max_clock = 400000;
+	else
+		max_clock = 350000;
 	if (mode->clock > max_clock)
 		return MODE_CLOCK_HIGH;
 
-- 
2.4.10