[Intel-gfx] [PATCH 3/4] drm/i915/gen9: Extend dmc debug mask to include cores

Mika Kuoppala mika.kuoppala at linux.intel.com
Thu Feb 18 15:21:13 UTC 2016


Cores need to be included into the debug mask. We don't exactly
know what it does but the spec says it must be enabled. So obey.

Signed-off-by: Mika Kuoppala <mika.kuoppala at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h         |  1 +
 drivers/gpu/drm/i915/intel_runtime_pm.c | 14 ++++++++------
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3774870477c1..f76cbf3e5d1e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7568,6 +7568,7 @@ enum skl_disp_power_wells {
 #define  DC_STATE_EN_UPTO_DC5_DC6_MASK   0x3
 
 #define  DC_STATE_DEBUG                  _MMIO(0x45520)
+#define  DC_STATE_DEBUG_MASK_CORES	(1<<0)
 #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1<<1)
 
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index cb91540cfbad..1b490c7e4020 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -456,15 +456,17 @@ static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
 	  */
 }
 
-static void gen9_set_dc_state_debugmask_memory_up(
-			struct drm_i915_private *dev_priv)
+static void gen9_set_dc_state_debugmask(struct drm_i915_private *dev_priv)
 {
-	uint32_t val;
+	uint32_t val, mask;
+
+	mask = DC_STATE_DEBUG_MASK_MEMORY_UP |
+		DC_STATE_DEBUG_MASK_CORES;
 
 	/* The below bit doesn't need to be cleared ever afterwards */
 	val = I915_READ(DC_STATE_DEBUG);
-	if (!(val & DC_STATE_DEBUG_MASK_MEMORY_UP)) {
-		val |= DC_STATE_DEBUG_MASK_MEMORY_UP;
+	if ((val & mask) != mask) {
+		val |= mask;
 		I915_WRITE(DC_STATE_DEBUG, val);
 		POSTING_READ(DC_STATE_DEBUG);
 	}
@@ -525,7 +527,7 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
 		state = DC_STATE_EN_UPTO_DC5;
 
 	if (state & DC_STATE_EN_UPTO_DC5_DC6_MASK)
-		gen9_set_dc_state_debugmask_memory_up(dev_priv);
+		gen9_set_dc_state_debugmask(dev_priv);
 
 	val = I915_READ(DC_STATE_EN);
 	DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
-- 
2.5.0



More information about the Intel-gfx mailing list