[Intel-gfx] [PATCH 3/4] drm/i915/gen9: Extend dmc debug mask to include cores

[Imre Deak]

On Fri, 2016-02-19 at 12:26 +0200, Mika Kuoppala wrote:
> Cores need to be included into the debug mask. We don't exactly
> know what it does but the spec says it must be enabled. So obey.
> 
> v2: Cores should be only set for BXT (Imre, Art)
> 
> Cc: Imre Deak <imre.deak at intel.com>
> Cc: Runyan, Arthur J <arthur.j.runyan at intel.com>
> Signed-off-by: Mika Kuoppala <mika.kuoppala at intel.com>

Reviewed-by: Imre Deak <imre.deak at intel.com>

> ---
>  drivers/gpu/drm/i915/i915_reg.h         |  1 +
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 16 ++++++++++------
>  2 files changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> index 3774870477c1..f76cbf3e5d1e 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7568,6 +7568,7 @@ enum skl_disp_power_wells {
>  #define  DC_STATE_EN_UPTO_DC5_DC6_MASK   0x3
>  
>  #define  DC_STATE_DEBUG                  _MMIO(0x45520)
> +#define  DC_STATE_DEBUG_MASK_CORES	(1<<0)
>  #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1<<1)
>  
>  /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using
> this register,
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 814cf5ac1ef0..089701b73112 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -456,15 +456,19 @@ static void assert_can_disable_dc9(struct
> drm_i915_private *dev_priv)
>  	  */
>  }
>  
> -static void gen9_set_dc_state_debugmask_memory_up(
> -			struct drm_i915_private *dev_priv)
> +static void gen9_set_dc_state_debugmask(struct drm_i915_private
> *dev_priv)
>  {
> -	uint32_t val;
> +	uint32_t val, mask;
> +
> +	mask = DC_STATE_DEBUG_MASK_MEMORY_UP;
> +
> +	if (IS_BROXTON(dev_priv))
> +		mask |= DC_STATE_DEBUG_MASK_CORES;
>  
>  	/* The below bit doesn't need to be cleared ever afterwards
> */
>  	val = I915_READ(DC_STATE_DEBUG);
> -	if (!(val & DC_STATE_DEBUG_MASK_MEMORY_UP)) {
> -		val |= DC_STATE_DEBUG_MASK_MEMORY_UP;
> +	if ((val & mask) != mask) {
> +		val |= mask;
>  		I915_WRITE(DC_STATE_DEBUG, val);
>  		POSTING_READ(DC_STATE_DEBUG);
>  	}
> @@ -526,7 +530,7 @@ static void gen9_set_dc_state(struct
> drm_i915_private *dev_priv, uint32_t state)
>  		state = DC_STATE_EN_UPTO_DC5;
>  
>  	if (state & DC_STATE_EN_UPTO_DC5_DC6_MASK)
> -		gen9_set_dc_state_debugmask_memory_up(dev_priv);
> +		gen9_set_dc_state_debugmask(dev_priv);
>  
>  	val = I915_READ(DC_STATE_EN);
>  	DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",