[Intel-gfx] [PATCH 4/6] drm/i915: Make the LPT iclkip 20MHz case more generic
Zanoni, Paulo R
paulo.r.zanoni at intel.com
Fri Feb 19 13:54:22 UTC 2016
Em Qua, 2016-02-17 às 21:41 +0200, ville.syrjala at linux.intel.com
escreveu:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> The reason for spcial casing 20MHz in the iclkip calculations is that
> it would overflow the 7 bit divisor value. Let's rewrite the special
> case to check for just that, and bump up auxdiv when needed. This
> makes
> the code work for freqeuencies close to but not exactly 20MHz. The
> real
> lower limit for auxdiv=0 is actually:
> 172800000/(0x7f+2)*64)=~20930 kHz, and below that we must resort to
> auxdiv=1.
>
> Actually this is all very theoretical since we limit the dotclock to
> min 25MHz with CRT on all platforms. 25Mhz is actually the documented
> limit in Bspec, so it seems we ought to never need to worry about the
> auxdiv=1 case. But no harm in having it.
I like the patch and it looks correct. The main "advantage" of the
previous version is that it matched the spec exactly, so future code
readers may be confused now. Maybe a little comment more explicitly
explaining why it doesn't match the spec now would help: possibly some
shorter version of your commit message, with the typos fixed.
Anyway, git-bisect should be enough and I'm fine even without the
comment:
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 40 +++++++++++++++++---------
> ----------
> 1 file changed, 19 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index a3c959cd8b3b..5e7b22a31098 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3957,37 +3957,35 @@ static void lpt_disable_iclkip(struct
> drm_i915_private *dev_priv)
> /* Program iCLKIP clock to the desired frequency */
> static void lpt_program_iclkip(struct drm_crtc *crtc)
> {
> - struct drm_device *dev = crtc->dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> int clock = to_intel_crtc(crtc)->config-
> >base.adjusted_mode.crtc_clock;
> u32 divsel, phaseinc, auxdiv, phasedir = 0;
> u32 temp;
>
> lpt_disable_iclkip(dev_priv);
>
> - /* 20MHz is a corner case which is out of range for the 7-
> bit divisor */
> - if (clock == 20000) {
> - auxdiv = 1;
> - divsel = 0x41;
> - phaseinc = 0x20;
> - } else {
> - /* The iCLK virtual clock root frequency is in MHz,
> - * but the adjusted_mode->crtc_clock in in KHz. To
> get the
> - * divisors, it is necessary to divide one by
> another, so we
> - * convert the virtual clock precision to KHz here
> for higher
> - * precision.
> - */
> + /* The iCLK virtual clock root frequency is in MHz,
> + * but the adjusted_mode->crtc_clock in in KHz. To get the
> + * divisors, it is necessary to divide one by another, so we
> + * convert the virtual clock precision to KHz here for
> higher
> + * precision.
> + */
> + for (auxdiv = 0; auxdiv < 2; auxdiv++) {
> u32 iclk_virtual_root_freq = 172800 * 1000;
> u32 iclk_pi_range = 64;
> - u32 desired_divisor, msb_divisor_value, pi_value;
> + u32 desired_divisor;
>
> - desired_divisor =
> DIV_ROUND_CLOSEST(iclk_virtual_root_freq, clock);
> - msb_divisor_value = desired_divisor / iclk_pi_range;
> - pi_value = desired_divisor % iclk_pi_range;
> + desired_divisor =
> DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
> + clock <<
> auxdiv);
> + divsel = (desired_divisor / iclk_pi_range) - 2;
> + phaseinc = desired_divisor % iclk_pi_range;
>
> - auxdiv = 0;
> - divsel = msb_divisor_value - 2;
> - phaseinc = pi_value;
> + /*
> + * Near 20MHz is a corner case which is
> + * out of range for the 7-bit divisor
> + */
> + if (divsel <= 0x7f)
> + break;
> }
>
> /* This should not happen with any sane values */
More information about the Intel-gfx
mailing list