[Intel-gfx] [PATCH 4/6] drm/i915/huc: Add HuC fw loading support

yu.dai at intel.com yu.dai at intel.com
Mon Jan 11 13:46:56 PST 2016


From: Alex Dai <yu.dai at intel.com>

The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.

HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.

Signed-off-by: Alex Dai <yu.dai at intel.com>
Signed-off-by: Peter Antoine <peter.antoine at intel.com>
---
 drivers/gpu/drm/i915/Makefile           |   1 +
 drivers/gpu/drm/i915/i915_dma.c         |   3 +
 drivers/gpu/drm/i915/i915_drv.h         |   3 +
 drivers/gpu/drm/i915/i915_gem.c         |   7 +
 drivers/gpu/drm/i915/i915_guc_reg.h     |   3 +
 drivers/gpu/drm/i915/intel_guc_loader.c |   7 +-
 drivers/gpu/drm/i915/intel_huc.h        |  44 ++++++
 drivers/gpu/drm/i915/intel_huc_loader.c | 262 ++++++++++++++++++++++++++++++++
 8 files changed, 325 insertions(+), 5 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_huc.h
 create mode 100644 drivers/gpu/drm/i915/intel_huc_loader.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 0851de07..693cc8f 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -42,6 +42,7 @@ i915-y += i915_cmd_parser.o \
 
 # general-purpose microcontroller (GuC) support
 i915-y += intel_guc_loader.o \
+	  intel_huc_loader.o \
 	  i915_guc_submission.o
 
 # autogenerated null render state
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 44a896c..1b99dd3 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -410,6 +410,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	 * working irqs for e.g. gmbus and dp aux transfers. */
 	intel_modeset_init(dev);
 
+	intel_huc_ucode_init(dev);
 	intel_guc_ucode_init(dev);
 
 	ret = i915_gem_init(dev);
@@ -453,6 +454,7 @@ cleanup_gem:
 	i915_gem_context_fini(dev);
 	mutex_unlock(&dev->struct_mutex);
 cleanup_irq:
+	intel_huc_ucode_fini(dev);
 	intel_guc_ucode_fini(dev);
 	drm_irq_uninstall(dev);
 cleanup_gem_stolen:
@@ -1194,6 +1196,7 @@ int i915_driver_unload(struct drm_device *dev)
 	/* Flush any outstanding unpin_work. */
 	flush_workqueue(dev_priv->wq);
 
+	intel_huc_ucode_fini(dev);
 	intel_guc_ucode_fini(dev);
 	mutex_lock(&dev->struct_mutex);
 	i915_gem_cleanup_ringbuffer(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 747d2d8..15e9e59 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -53,6 +53,7 @@
 #include <linux/kref.h>
 #include <linux/pm_qos.h>
 #include "intel_guc.h"
+#include "intel_huc.h"
 
 /* General customization:
  */
@@ -1699,6 +1700,7 @@ struct drm_i915_private {
 
 	struct i915_virtual_gpu vgpu;
 
+	struct intel_huc huc;
 	struct intel_guc guc;
 
 	struct intel_csr csr;
@@ -2629,6 +2631,7 @@ struct drm_i915_cmd_table {
 
 #define HAS_GUC_UCODE(dev)	(IS_GEN9(dev) && !IS_KABYLAKE(dev))
 #define HAS_GUC_SCHED(dev)	(IS_GEN9(dev) && !IS_KABYLAKE(dev))
+#define HAS_HUC_UCODE(dev)	(IS_GEN9(dev) && !IS_KABYLAKE(dev))
 
 #define HAS_RESOURCE_STREAMER(dev) (IS_HASWELL(dev) || \
 				    INTEL_INFO(dev)->gen >= 8)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 6c60e04..75de2eb 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -4849,6 +4849,13 @@ i915_gem_init_hw(struct drm_device *dev)
 
 	/* We can't enable contexts until all firmware is loaded */
 	if (HAS_GUC_UCODE(dev)) {
+		/* init WOPCM */
+		I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
+		I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE |
+				HUC_LOADING_AGENT_GUC);
+
+		intel_huc_ucode_load(dev);
+
 		ret = intel_guc_ucode_load(dev);
 		if (ret) {
 			DRM_ERROR("Failed to initialize GuC, error %d\n", ret);
diff --git a/drivers/gpu/drm/i915/i915_guc_reg.h b/drivers/gpu/drm/i915/i915_guc_reg.h
index e4ba582..8d27c09 100644
--- a/drivers/gpu/drm/i915/i915_guc_reg.h
+++ b/drivers/gpu/drm/i915/i915_guc_reg.h
@@ -52,9 +52,12 @@
 #define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
 #define DMA_COPY_SIZE			_MMIO(0xc310)
 #define DMA_CTRL			_MMIO(0xc314)
+#define   HUC_UKERNEL			  (1<<9)
 #define   UOS_MOVE			  (1<<4)
 #define   START_DMA			  (1<<0)
 #define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)
+#define   HUC_LOADING_AGENT_VCR		  (0<<1)
+#define   HUC_LOADING_AGENT_GUC		  (1<<1)
 #define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */
 #define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)
 
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index a704d80..5832792 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -256,7 +256,8 @@ static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv)
 	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
 
 	/* Finally start the DMA */
-	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA) |
+			_MASKED_BIT_DISABLE(HUC_UKERNEL));
 
 	/*
 	 * Spin-wait for the DMA to complete & the GuC to start up.
@@ -307,10 +308,6 @@ static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
 
 	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
 
-	/* init WOPCM */
-	I915_WRITE(GUC_WOPCM_SIZE, GUC_WOPCM_SIZE_VALUE);
-	I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);
-
 	/* Enable MIA caching. GuC clock gating is disabled. */
 	I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
 
diff --git a/drivers/gpu/drm/i915/intel_huc.h b/drivers/gpu/drm/i915/intel_huc.h
new file mode 100644
index 0000000..28fb2a1
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_huc.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#ifndef _INTEL_HUC_H_
+#define _INTEL_HUC_H_
+
+#include "intel_guc.h"
+
+#define HUC_STATUS2		_MMIO(0xD3B0)
+#define   HUC_FW_VERIFIED	(1<<7)
+
+struct intel_huc {
+	/* Generic uC firmware management */
+	struct intel_uc_fw huc_fw;
+
+	/* HuC-specific additions */
+};
+
+extern void intel_huc_ucode_init(struct drm_device *dev);
+extern int intel_huc_ucode_load(struct drm_device *dev);
+extern void intel_huc_ucode_auth(struct drm_device *dev);
+extern void intel_huc_ucode_fini(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c
new file mode 100644
index 0000000..405e70e
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_huc_loader.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+#include <linux/firmware.h>
+#include "i915_drv.h"
+#include "intel_huc.h"
+
+/**
+ * DOC: HuC Firmware
+ *
+ * Motivation:
+ * GEN9 introduces a new dedicated firmware for usage in media HEVC (High
+ * Efficiency Video Coding) operations. Userspace can use the firmware
+ * capabilities by adding HuC specific commands to batch buffers.
+ *
+ * Implementation:
+ * On supported platforms, i915's job is to load the firmware stored on the
+ * file system and assist with authentication. It is up to userspace to
+ * detect the presence of HuC support on a platform, on their own.
+ * For debugging, i915 provides a debugfs file, i915_huc_load_status_info
+ * which displays the firmware load status.
+ *
+ * The unified uC firmware loader is used. Firmware binary is fetched by the
+ * loader asynchronously from the driver init process. However, the actual
+ * loading to HW is deferred until GEM initialization is done. Be note that HuC
+ * firmware loading must be done before GuC loading.
+ */
+
+#define I915_SKL_HUC_UCODE "i915/skl_huc_ver1.bin"
+MODULE_FIRMWARE(I915_SKL_HUC_UCODE);
+
+/**
+ * intel_huc_load_ucode() - DMA's the firmware
+ * @dev: the drm device
+ *
+ * This function takes the gem object containing the firmware, sets up the DMA
+ * engine MMIO, triggers the DMA operation and waits for it to finish.
+ *
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Return: 0 on success, non-zero on failure
+ */
+
+static int huc_ucode_xfer(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	unsigned long offset = 0;
+	u32 size;
+	int ret;
+
+	ret = i915_gem_object_set_to_gtt_domain(huc_fw->uc_fw_obj, false);
+	if (ret) {
+		DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
+		return ret;
+	}
+
+	ret = i915_gem_obj_ggtt_pin(huc_fw->uc_fw_obj, 0, 0);
+	if (ret) {
+		DRM_DEBUG_DRIVER("pin failed %d\n", ret);
+		return ret;
+	}
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* Set the source address for the uCode */
+	offset = i915_gem_obj_ggtt_offset(huc_fw->uc_fw_obj) +
+			huc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/* Hardware doesn't look at destination address for HuC. Set it to 0,
+	 * but still program the correct address space.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	size = huc_fw->header_size + huc_fw->ucode_size;
+	I915_WRITE(DMA_COPY_SIZE, size);
+
+	/* Start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(HUC_UKERNEL | START_DMA));
+
+	/* Wait for DMA to finish */
+	ret = wait_for_atomic((I915_READ(DMA_CTRL) & START_DMA) == 0, 500);
+
+	DRM_DEBUG_DRIVER("HuC DMA transfer wait over with ret %d\n", ret);
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	/*
+	 * We keep the object pages for reuse during resume. But we can unpin it
+	 * now that DMA has completed, so it doesn't continue to take up space.
+	 */
+	i915_gem_object_ggtt_unpin(huc_fw->uc_fw_obj);
+
+	return ret;
+}
+
+/**
+ * intel_huc_ucode_init() - initiate HuC firmware loading request
+ * @dev: the drm device
+ *
+ * Called early during driver load, but after GEM is initialised. The loading
+ * will continue only when driver explicitly specify firmware name and version.
+ * All other cases are considered as UC_FIRMWARE_NONE either because HW is not
+ * capable or driver yet support it. And there will be no error message for
+ * UC_FIRMWARE_NONE cases.
+ *
+ * The DMA-copying to HW is done later when intel_huc_ucode_load() is called.
+ */
+void intel_huc_ucode_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_huc *huc = &dev_priv->huc;
+	struct intel_uc_fw *huc_fw = &huc->huc_fw;
+	const char *fw_path = NULL;
+
+	huc_fw->uc_dev = dev;
+	huc_fw->uc_fw_path = NULL;
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+	huc_fw->load_status = UC_FIRMWARE_NONE;
+	huc_fw->fw_type = UC_FW_TYPE_HUC;
+
+	if (!HAS_HUC_UCODE(dev))
+		return;
+
+	if (IS_SKYLAKE(dev)) {
+		fw_path = I915_SKL_HUC_UCODE;
+		huc_fw->major_ver_wanted = 1;
+		huc_fw->minor_ver_wanted = 5;
+	}
+
+	if (fw_path == NULL)
+		return;
+
+	huc_fw->uc_fw_path = fw_path;
+	huc_fw->fetch_status = UC_FIRMWARE_PENDING;
+
+	DRM_DEBUG_DRIVER("HuC firmware pending, path %s\n", fw_path);
+
+	intel_uc_fw_fetch(dev, huc_fw);
+}
+
+/**
+ * intel_huc_ucode_load() - load HuC uCode to device
+ * @dev: the drm device
+ *
+ * Called from gem_init_hw() during driver loading and also after a GPU reset.
+ * Be note that HuC loading must be done before GuC loading.
+ *
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_huc_ucode_init(), so here we need only check that
+ * is succeeded, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_huc_ucode_load(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+	int err;
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_NONE)
+		return 0;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	if (huc_fw->fetch_status == UC_FIRMWARE_SUCCESS &&
+	    huc_fw->load_status == UC_FIRMWARE_FAIL)
+		return -ENOEXEC;
+
+	huc_fw->load_status = UC_FIRMWARE_PENDING;
+
+	switch (huc_fw->fetch_status) {
+	case UC_FIRMWARE_FAIL:
+		/* something went wrong :( */
+		err = -EIO;
+		goto fail;
+
+	case UC_FIRMWARE_NONE:
+	case UC_FIRMWARE_PENDING:
+	default:
+		/* "can't happen" */
+		WARN_ONCE(1, "HuC fw %s invalid fetch_status %s [%d]\n",
+			huc_fw->uc_fw_path,
+			intel_uc_fw_status_repr(huc_fw->fetch_status),
+			huc_fw->fetch_status);
+		err = -ENXIO;
+		goto fail;
+
+	case UC_FIRMWARE_SUCCESS:
+		break;
+	}
+
+	err = huc_ucode_xfer(dev_priv);
+	if (err)
+		goto fail;
+
+	huc_fw->load_status = UC_FIRMWARE_SUCCESS;
+
+	DRM_DEBUG_DRIVER("%s fw status: fetch %s, load %s\n",
+		huc_fw->uc_fw_path,
+		intel_uc_fw_status_repr(huc_fw->fetch_status),
+		intel_uc_fw_status_repr(huc_fw->load_status));
+
+	return 0;
+
+fail:
+	if (huc_fw->load_status == UC_FIRMWARE_PENDING)
+		huc_fw->load_status = UC_FIRMWARE_FAIL;
+
+	DRM_ERROR("Failed to complete HuC uCode load with ret %d\n", err);
+
+	return err;
+}
+
+/**
+ * intel_huc_ucode_fini() - clean up resources allocated for HuC
+ * @dev: the drm device
+ *
+ * Cleans up by releasing the huc firmware GEM obj.
+ */
+void intel_huc_ucode_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.huc_fw;
+
+	mutex_lock(&dev->struct_mutex);
+	if (huc_fw->uc_fw_obj)
+		drm_gem_object_unreference(&huc_fw->uc_fw_obj->base);
+	huc_fw->uc_fw_obj = NULL;
+	mutex_unlock(&dev->struct_mutex);
+
+	huc_fw->fetch_status = UC_FIRMWARE_NONE;
+}
-- 
2.5.0



More information about the Intel-gfx mailing list