[Intel-gfx] [PATCH] drm/i915: disable non-sequential pfits on ivb/hsw

[Chris Bainbridge]

The existing code assumes a sequential mapping of panel fitters to pipes
(pfit0-pipeA, pfit1-pipeB, pfit2-pipeC), but boot firmware can
arbitrarily assign any pipe to a pfit on IVB hardware e.g. Macbook UEFI
uses pfit 0 and pipe C for eDP1 when the firmware boots in a non-16:10
resolution (the last-used resolution is stored in NVRAM by OS X so the
firmware can immediately restore it at boot). When this happens, the
display will appear letterboxed due to incorrect aspect ratio and
attempting to switch to alternative resolutions will fail. Fix this by
disabling any panel fitters which have been non-sequentially assigned at
boot time.

Link: https://bugs.freedesktop.org/show_bug.cgi?id=93523
Signed-off-by: Chris Bainbridge <chris.bainbridge at gmail.com>
---
 drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 32cf97346978..9e588139a2dd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9170,6 +9170,24 @@ static void ironlake_get_pfit_config(struct intel_crtc *crtc,
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
+	int pipe;
+
+	/*
+	 * PF_CTL assumes panel fitter 0 is on pipe A, panel fitter 1 is on
+	 * pipe B, and panel fitter 2 is on pipe C, but firmware can init IVB
+	 * panel fitters to any arbitrary pipe (Macbook UEFI uses pfit 0 for
+	 * pipe C), so find and disable any other mappings.
+	 */
+	for (pipe = 0; pipe < INTEL_INFO(dev)->num_pipes; pipe++) {
+		tmp = I915_READ(PF_CTL(pipe));
+		if (IS_GEN7(dev) && (tmp & PF_ENABLE) &&
+		    PF_PIPE_SEL_IVB(pipe) != (tmp & PF_PIPE_SEL_MASK_IVB)) {
+			DRM_DEBUG_KMS("disabling initial panel fitter\n");
+			I915_WRITE(PF_CTL(pipe), 0);
+			I915_WRITE(PF_WIN_POS(pipe), 0);
+			I915_WRITE(PF_WIN_SZ(pipe), 0);
+		}
+	}
 
 	tmp = I915_READ(PF_CTL(crtc->pipe));
 
@@ -9177,14 +9195,6 @@ static void ironlake_get_pfit_config(struct intel_crtc *crtc,
 		pipe_config->pch_pfit.enabled = true;
 		pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
 		pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
-
-		/* We currently do not free assignements of panel fitters on
-		 * ivb/hsw (since we don't use the higher upscaling modes which
-		 * differentiates them) so just WARN about this case for now. */
-		if (IS_GEN7(dev)) {
-			WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
-				PF_PIPE_SEL_IVB(crtc->pipe));
-		}
 	}
 }
 
-- 
2.1.4