[Intel-gfx] [PATCH v2 4/4] drm/i915: Enable lspcon initialization

[Sharma, Shashank]

Regards
Shashank

On 7/1/2016 4:23 AM, Rodrigo Vivi wrote:
> On Tue, Jun 21, 2016 at 8:00 AM, Shashank Sharma
> <shashank.sharma at intel.com> wrote:
>> This patch adds initialization code for lspcon.
>> What we are doing here is:
>>          - Check if lspcon is configured in VBT for this port
>>          - If lspcon is configured, initialize it and configure it
>>            as DP port.
>>
>> V2: Addressed Ville's review comments:
>> - Not adding AVI IF functions for LSPCON display now.
>>    This part will be added once the dig_port level AVI-IF series
>>    gets merged.
>>
>> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
>> ---
>>   drivers/gpu/drm/i915/intel_ddi.c | 29 ++++++++++++++++++++++++++++-
>>   1 file changed, 28 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
>> index ad3b0ee..208a1ff 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -2323,7 +2323,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
>>          struct intel_digital_port *intel_dig_port;
>>          struct intel_encoder *intel_encoder;
>>          struct drm_encoder *encoder;
>> -       bool init_hdmi, init_dp;
>> +       bool init_hdmi, init_dp, init_lspcon = false;
>>          int max_lanes;
>>
>>          if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) {
>> @@ -2355,6 +2355,19 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
>>          init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi ||
>>                       dev_priv->vbt.ddi_port_info[port].supports_hdmi);
>>          init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp;
>> +
>> +       if (intel_bios_is_lspcon_present(dev_priv, port)) {
>> +               /*
>> +                * Lspcon device needs to be driven with DP connector
>> +                * with special detection sequence. So make sure DP
>> +                * is initialized before lspcon.
>> +                */
>> +               init_dp = true;
>> +               init_lspcon = true;
>> +               init_hdmi = false;
>> +               DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
>> +       }
>> +
>>          if (!init_dp && !init_hdmi) {
>>                  DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
>>                                port_name(port));
>> @@ -2430,6 +2443,20 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
>>                          goto err;
>>          }
>>
>> +       if (init_lspcon) {
>> +               if (lspcon_init(intel_dig_port))
>> +                       /* TODO: handle hdmi info frame part */
>
> Does it work without handling it? What are we missing here?
> Is this related to "drm/i915: Allow DP ports to set/readout infoframe
> state (WIP)"
Yes, Ville suggested not to handle AVI IF in LSPCON specifically, but he 
gave this patch set where its being handled for DDI displays.
> shouldn't it be part of a same series?
>
I am not sure, they are two different threads going on, you can suggest 
how to go for this.
>
Shashank

>> +                       DRM_DEBUG_KMS("LSPCON init success on port %c\n",
>> +                               port_name(port));
>> +               else
>> +                       /*
>> +                        * LSPCON init faied, but DP init was success, so
>> +                        * lets try to drive as DP++ port.
>> +                        */
>> +                       DRM_ERROR("LSPCON init failed on port %c\n",
>> +                               port_name(port));
>> +       }
>> +
>>          return;
>>
>>   err:
>> --
>> 1.9.1
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>