[Intel-gfx] [RFC v2] drm/i915/chv: Clip cursor for CHV pipe C HW Cursor pos < 0
Shobhit Kumar
kumar at shobhit.info
Fri Jul 8 09:01:29 UTC 2016
On Wed, Jun 29, 2016 at 6:24 PM, Shobhit Kumar
<shobhit.kumar at linux.intel.com> wrote:
>
> From: Shobhit Kumar <shobhit.kumar at intel.com>
>
> CHV pipe C hits underrun when we get negative crtc_x values of cursor.
> To avoid this we clip and shift the cursor image by negative crtc_x
> value.
>
> v2: Make a copy of cursor plane state and allocate new gem object and fb
> for clipped cursor and use that in case of negative cursor position
>
> v3: Updated error handling
> Pin the gem object before use.
Summarizing the discussion with Ville and Chris on IRC few days back -
1. This indeed does break the uabi which expects coherent writing into
cursor plane (Chris)
2. Doing this with single buffer in kernel might result in tearing. We
will need triple buffering (Ville)
3. Some continuous rendering tools might break (Chris)
4. Animated cursor might break (Chris). But then update plane call
should copy back the original buffer every time and animated cursor
should work as long as this is not filtered.
So still recommendation remains to use SW cursor, though in theory
clipping is possible but with additional complexity.
Regards
Shobhit
>
> Signed-off-by: Akshu Agrawal <akshu.agrawal at intel.com>
> Signed-off-by: Shobhit Kumar <shobhit.kumar at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 7 ++
> drivers/gpu/drm/i915/intel_display.c | 131 ++++++++++++++++++++++++++++++++++-
> 2 files changed, 137 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 724d34b..1e59c02 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2041,6 +2041,13 @@ struct drm_i915_private {
> struct intel_encoder *dig_port_map[I915_MAX_PORTS];
>
> /*
> + * Temporary copy of cursor plane state for CHV PIPE_C
> + * Will be initialized only when crtc_x < 0 as there is a
> + * HW bug causing pipe underrun
> + */
> + struct intel_plane_state *cursor_state;
> +
> + /*
> * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
> * will be rejected. Instead look for a better place.
> */
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index c3b5dc8..e6c103a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -14456,6 +14456,132 @@ intel_update_cursor_plane(struct drm_plane *plane,
> intel_crtc_update_cursor(crtc, state);
> }
>
> +static void
> +intel_update_chv_pipe_c_cursor_plane(struct drm_plane *plane,
> + const struct intel_crtc_state *crtc_state,
> + const struct intel_plane_state *state)
> +{
> + struct drm_crtc *crtc = crtc_state->base.crtc;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct drm_device *dev = plane->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
> + struct drm_i915_gem_object *cur_obj = NULL, *use_obj = NULL;
> + uint32_t addr;
> + struct intel_plane_state *cursor_state = dev_priv->cursor_state;
> + const struct intel_plane_state *use_state;
> + char __iomem *src, *dst;
> + bool pinned = true;
> +
> + if (state->visible && state->base.crtc_x < 0) {
> + int bytes_per_pixel = state->base.fb->bits_per_pixel / 8;
> + int x = state->base.crtc_x;
> + int width = state->base.crtc_w;
> + int height = state->base.crtc_h;
> + struct drm_mode_fb_cmd2 mode_cmd = { 0 };
> + int i;
> +
> + if (!cursor_state) {
> + cursor_state = kzalloc(sizeof(*cursor_state), GFP_KERNEL);
> + if (!cursor_state) {
> + use_state = state;
> + use_obj = obj;
> + goto update;
> + }
> +
> + memcpy(cursor_state, state, sizeof(*state));
> +
> + /* Allocate new gem object */
> + cur_obj = i915_gem_object_create(dev, obj->base.size);
> + if (IS_ERR(cur_obj))
> + goto gem_err;
> +
> + mode_cmd.width = cursor_state->base.fb->width;
> + mode_cmd.height = cursor_state->base.fb->height;
> + mode_cmd.pitches[0] = cursor_state->base.fb->pitches[0];
> + mode_cmd.pixel_format = cursor_state->base.fb->pixel_format;
> +
> + cursor_state->base.fb = intel_framebuffer_create(dev, &mode_cmd, cur_obj);
> + if (IS_ERR(cursor_state->base.fb)) {
> + drm_gem_object_unreference_unlocked(&cur_obj->base);
> + goto gem_err;
> + }
> +
> + if (i915_gem_obj_ggtt_pin(cur_obj, 0, 0) < 0) {
> + drm_gem_object_unreference_unlocked(&cur_obj->base);
> + pinned = false;
> + goto cleanup;
> + }
> +
> + dev_priv->cursor_state = cursor_state;
> + } else
> + cur_obj = intel_fb_obj(cursor_state->base.fb);
> +
> + src = ioremap_wc(dev_priv->ggtt.mappable_base +
> + i915_gem_obj_ggtt_offset(obj),
> + obj->base.size);
> +
> + dst = ioremap_wc(dev_priv->ggtt.mappable_base +
> + i915_gem_obj_ggtt_offset(cur_obj),
> + cur_obj->base.size);
> +
> + /* shift the original cusrsor in to copy buffer offsetting -ive pos */
> + x = -x;
> + for (i = 0; i < height; i++) {
> + src += x * bytes_per_pixel;
> + memcpy(dst, src, (width - x) * bytes_per_pixel);
> + dst += (width - x) * bytes_per_pixel;
> + memset(dst, 0, x * bytes_per_pixel);
> + dst += x * bytes_per_pixel;
> + src += (width -x) * bytes_per_pixel;
> + }
> +
> + iounmap(src);
> + iounmap(dst);
> +
> + cursor_state->base.crtc_x = 0;
> + use_obj = cur_obj;
> + use_state = cursor_state;
> +
> + goto update;
> + }
> +
> +cleanup:
> + if (cursor_state) {
> + struct intel_framebuffer *intel_fb = to_intel_framebuffer(cursor_state->base.fb);
> +
> + if (pinned)
> + i915_gem_object_ggtt_unpin(cur_obj);
> +
> + drm_framebuffer_cleanup(cursor_state->base.fb);
> + mutex_lock(&dev->struct_mutex);
> + drm_gem_object_unreference(&intel_fb->obj->base);
> + mutex_unlock(&dev->struct_mutex);
> + kfree(intel_fb);
> + }
> +
> +gem_err:
> + if (dev_priv->cursor_state) {
> + kfree(dev_priv->cursor_state);
> + dev_priv->cursor_state = NULL;
> + }
> +
> + use_state = state;
> + use_obj = obj;
> +
> +update:
> + if (!use_obj)
> + addr = 0;
> + else if (!INTEL_INFO(dev)->cursor_needs_physical)
> + addr = i915_gem_obj_ggtt_offset(use_obj);
> + else
> + addr = use_obj->phys_handle->busaddr;
> +
> + intel_crtc->cursor_addr = addr;
> +
> + intel_crtc_update_cursor(crtc, use_state);
> +}
> +
> static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> int pipe)
> {
> @@ -14478,7 +14604,10 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> cursor->plane = pipe;
> cursor->frontbuffer_bit = INTEL_FRONTBUFFER_CURSOR(pipe);
> cursor->check_plane = intel_check_cursor_plane;
> - cursor->update_plane = intel_update_cursor_plane;
> + if (IS_CHERRYVIEW(dev) && pipe == PIPE_C)
> + cursor->update_plane = intel_update_chv_pipe_c_cursor_plane;
> + else
> + cursor->update_plane = intel_update_cursor_plane;
> cursor->disable_plane = intel_disable_cursor_plane;
>
> ret = drm_universal_plane_init(dev, &cursor->base, 0,
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list