[Intel-gfx] [PATCH 1/9] drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
David Weinehall
david.weinehall at linux.intel.com
Wed Jul 13 15:31:39 UTC 2016
On Tue, Jul 12, 2016 at 03:59:28PM +0300, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Bspec says:
> "For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control =
> DDIA x4), the I_boost value has to be programmed in both
> tx_blnclegsctl_0 and tx_blnclegsctl_4."
>
> Currently we only program tx_blnclegsctl_0. Let's do the other one as
> well.
Nice find.
Reviewed-by: David Weinehall <david.weinehall at linux.intel.com>
> Cc: David Weinehall <david.weinehall at linux.intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> drivers/gpu/drm/i915/intel_ddi.c | 36 +++++++++++++++++++++++-------------
> 2 files changed, 24 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 8bfde75789f6..e6f9f05b3a4a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1536,6 +1536,7 @@ enum skl_disp_power_wells {
> #define BALANCE_LEG_MASK(port) (7<<(8+3*(port)))
> /* Balance leg disable bits */
> #define BALANCE_LEG_DISABLE_SHIFT 23
> +#define BALANCE_LEG_DISABLE(port) (1 << (23 + (port)))
>
> /*
> * Fence registers
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index dd1d6fe12297..75354cd9bbab 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1379,14 +1379,30 @@ void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc)
> TRANS_CLK_SEL_DISABLED);
> }
>
> -static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv,
> - u32 level, enum port port, int type)
> +static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv,
> + enum port port, uint8_t iboost)
> {
> + u32 tmp;
> +
> + tmp = I915_READ(DISPIO_CR_TX_BMU_CR0);
> + tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port));
> + if (iboost)
> + tmp |= iboost << BALANCE_LEG_SHIFT(port);
> + else
> + tmp |= BALANCE_LEG_DISABLE(port);
> + I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp);
> +}
> +
> +static void skl_ddi_set_iboost(struct intel_encoder *encoder, u32 level)
> +{
> + struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
> + struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
> + enum port port = intel_dig_port->port;
> + int type = encoder->type;
> const struct ddi_buf_trans *ddi_translations;
> uint8_t iboost;
> uint8_t dp_iboost, hdmi_iboost;
> int n_entries;
> - u32 reg;
>
> /* VBT may override standard boost values */
> dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level;
> @@ -1428,16 +1444,10 @@ static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv,
> return;
> }
>
> - reg = I915_READ(DISPIO_CR_TX_BMU_CR0);
> - reg &= ~BALANCE_LEG_MASK(port);
> - reg &= ~(1 << (BALANCE_LEG_DISABLE_SHIFT + port));
> -
> - if (iboost)
> - reg |= iboost << BALANCE_LEG_SHIFT(port);
> - else
> - reg |= 1 << (BALANCE_LEG_DISABLE_SHIFT + port);
> + _skl_ddi_set_iboost(dev_priv, port, iboost);
>
> - I915_WRITE(DISPIO_CR_TX_BMU_CR0, reg);
> + if (port == PORT_A && intel_dig_port->max_lanes == 4)
> + _skl_ddi_set_iboost(dev_priv, PORT_E, iboost);
> }
>
> static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv,
> @@ -1568,7 +1578,7 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
> level = translate_signal_level(signal_levels);
>
> if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
> - skl_ddi_set_iboost(dev_priv, level, port, encoder->type);
> + skl_ddi_set_iboost(encoder, level);
> else if (IS_BROXTON(dev_priv))
> bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type);
>
> --
> 2.7.4
>
More information about the Intel-gfx
mailing list