[Intel-gfx] [PATCH 03/11] drm/doc: document all the properties in drm_mode_config
Daniel Vetter
daniel.vetter at ffwll.ch
Fri Jul 15 19:48:00 UTC 2016
I'm fed up with the warning noise from kernel-doc.
Aside: I stumbled over dirty_info_property, which is only set by udl
and qxl. But we have a _lot_ more drivers implementing a dirty
callback on framebuffers. Not entirely sure what the ABI is supposed
to be here, but it seems confusing for sure.
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
include/drm/drm_crtc.h | 196 +++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 180 insertions(+), 16 deletions(-)
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 656f189f1198..6a702a484a23 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -2351,18 +2351,8 @@ struct drm_mode_config_funcs {
* @property_blob_list: list of all the blob property objects
* @blob_lock: mutex for blob property allocation and management
* @*_property: core property tracking
- * @degamma_lut_property: LUT used to convert the framebuffer's colors to linear
- * gamma
- * @degamma_lut_size_property: size of the degamma LUT as supported by the
- * driver (read-only)
- * @ctm_property: Matrix used to convert colors after the lookup in the
- * degamma LUT
- * @gamma_lut_property: LUT used to convert the colors, after the CSC matrix, to
- * the gamma space of the connected screen (read-only)
- * @gamma_lut_size_property: size of the gamma LUT as supported by the driver
* @preferred_depth: preferred RBG pixel depth, used by fb helpers
* @prefer_shadow: hint to userspace to prefer shadow-fb rendering
- * @async_page_flip: does this device support async flips on the primary plane?
* @cursor_width: hint to userspace for max cursor width
* @cursor_height: hint to userspace for max cursor height
* @helper_private: mid-layer private data
@@ -2457,64 +2447,238 @@ struct drm_mode_config {
/* pointers to standard properties */
struct list_head property_blob_list;
+ /**
+ * @edid_property: Default connector property to hold the EDID of the
+ * currently connected sink, if any.
+ */
struct drm_property *edid_property;
+ /**
+ * @dpms_property: Default connector property to control the
+ * connector's DPMS state.
+ */
struct drm_property *dpms_property;
+ /**
+ * @path_property: Default connector property to hold the DP MST path
+ * for the port.
+ */
struct drm_property *path_property;
+ /**
+ * @tile_property: Default connector property to store the tile
+ * position of a tiled screen, for sinks which need to be driven with
+ * multiple CRTCs.
+ */
struct drm_property *tile_property;
+ /**
+ * @plane_type_property: Default plane property to differentiate
+ * CURSOR, PRIMARY and OVERLAY legacy uses of planes.
+ */
struct drm_property *plane_type_property;
+ /**
+ * @rotation_property: Optional property for planes or CRTCs to specifiy
+ * rotation.
+ */
struct drm_property *rotation_property;
+ /**
+ * @prop_src_x: Default atomic plane property for the plane source
+ * position in the connected &drm_framebuffer.
+ */
struct drm_property *prop_src_x;
+ /**
+ * @prop_src_y: Default atomic plane property for the plane source
+ * position in the connected &drm_framebuffer.
+ */
struct drm_property *prop_src_y;
+ /**
+ * @prop_src_w: Default atomic plane property for the plane source
+ * position in the connected &drm_framebuffer.
+ */
struct drm_property *prop_src_w;
+ /**
+ * @prop_src_h: Default atomic plane property for the plane source
+ * position in the connected &drm_framebuffer.
+ */
struct drm_property *prop_src_h;
+ /**
+ * @prop_crtc_x: Default atomic plane property for the plane destination
+ * position in the &drm_crtc is is being shown on.
+ */
struct drm_property *prop_crtc_x;
+ /**
+ * @prop_crtc_y: Default atomic plane property for the plane destination
+ * position in the &drm_crtc is is being shown on.
+ */
struct drm_property *prop_crtc_y;
+ /**
+ * @prop_crtc_w: Default atomic plane property for the plane destination
+ * position in the &drm_crtc is is being shown on.
+ */
struct drm_property *prop_crtc_w;
+ /**
+ * @prop_crtc_h: Default atomic plane property for the plane destination
+ * position in the &drm_crtc is is being shown on.
+ */
struct drm_property *prop_crtc_h;
+ /**
+ * @prop_fb_id: Default atomic plane property to specify the
+ * &drm_framebuffer.
+ */
struct drm_property *prop_fb_id;
+ /**
+ * @prop_crtc_id: Default atomic plane property to specify the
+ * &drm_crtc.
+ */
struct drm_property *prop_crtc_id;
+ /**
+ * @prop_active: Default atomic CRTC property to control the active
+ * state, which is the simplified implementation for DPMS in atomic
+ * drivers.
+ */
struct drm_property *prop_active;
+ /**
+ * @prop_mode_id: Default atomic CRTC property to set the mode for a
+ * CRTC. A 0 mode implies that the CRTC is entirely disabled - all
+ * connectors must be of and active must be set to disabled, too.
+ */
struct drm_property *prop_mode_id;
- /* DVI-I properties */
+ /**
+ * @dvi_i_subconnector_property: Optional DVI-I property to
+ * differentiate between analog or digital mode.
+ */
struct drm_property *dvi_i_subconnector_property;
+ /**
+ * @dvi_i_select_subconnector_property: Optional DVI-I property to
+ * select between analog or digital mode.
+ */
struct drm_property *dvi_i_select_subconnector_property;
- /* TV properties */
+ /**
+ * @tv_subconnector_property: Optional TV property to differentiate
+ * between different TV connector types.
+ */
struct drm_property *tv_subconnector_property;
+ /**
+ * @tv_select_subconnector_property: Optional TV property to select
+ * between different TV connector types.
+ */
struct drm_property *tv_select_subconnector_property;
+ /**
+ * @tv_mode_property: Optional TV property to select
+ * the output TV mode.
+ */
struct drm_property *tv_mode_property;
+ /**
+ * @tv_left_margin_property: Optional TV property to set the left
+ * margin.
+ */
struct drm_property *tv_left_margin_property;
+ /**
+ * @tv_right_margin_property: Optional TV property to set the right
+ * margin.
+ */
struct drm_property *tv_right_margin_property;
+ /**
+ * @tv_top_margin_property: Optional TV property to set the right
+ * margin.
+ */
struct drm_property *tv_top_margin_property;
+ /**
+ * @tv_bottom_margin_property: Optional TV property to set the right
+ * margin.
+ */
struct drm_property *tv_bottom_margin_property;
+ /**
+ * @tv_brightness_property: Optional TV property to set the
+ * brightness.
+ */
struct drm_property *tv_brightness_property;
+ /**
+ * @tv_contrast_property: Optional TV property to set the
+ * contrast.
+ */
struct drm_property *tv_contrast_property;
+ /**
+ * @tv_flicker_reduction_property: Optional TV property to control the
+ * flicker reduction mode.
+ */
struct drm_property *tv_flicker_reduction_property;
+ /**
+ * @tv_overscan_property: Optional TV property to control the overscan
+ * setting.
+ */
struct drm_property *tv_overscan_property;
+ /**
+ * @tv_saturation_property: Optional TV property to set the
+ * saturation.
+ */
struct drm_property *tv_saturation_property;
+ /**
+ * @tv_hue_property: Optional TV property to set the hue.
+ */
struct drm_property *tv_hue_property;
- /* Optional properties */
+ /**
+ * @scaling_mode_property: Optional connector property to control the
+ * upscaling, mostly used for built-in panels.
+ */
struct drm_property *scaling_mode_property;
+ /**
+ * @aspect_ratio_property: Optional connector property to control the
+ * HDMI infoframe aspect ratio setting.
+ */
struct drm_property *aspect_ratio_property;
+ /**
+ * @dirty_info_property: Optional connector property to give userspace a
+ * hint that the DIRTY_FB ioctl should be used.
+ */
struct drm_property *dirty_info_property;
- /* Optional color correction properties */
+ /**
+ * @degamma_lut_property: Optional CRTC property to set the LUT used to
+ * convert the framebuffer's colors to linear gamma.
+ */
struct drm_property *degamma_lut_property;
+ /**
+ * @degamma_lut_size_property: Optional CRTC property for the size of
+ * the degamma LUT as supported by the driver (read-only).
+ */
struct drm_property *degamma_lut_size_property;
+ /**
+ * @ctm_property: Optional CRTC property to set the
+ * matrix used to convert colors after the lookup in the
+ * degamma LUT.
+ */
struct drm_property *ctm_property;
+ /**
+ * @gamma_lut_property: Optional CRTC property to set the LUT used to
+ * convert the colors, after the CTM matrix, to the gamma space of the
+ * connected screen.
+ */
struct drm_property *gamma_lut_property;
+ /**
+ * @gamma_lut_size_property: Optional CRTC property for the size of the
+ * gamma LUT as supported by the driver (read-only).
+ */
struct drm_property *gamma_lut_size_property;
- /* properties for virtual machine layout */
+ /**
+ * @suggested_x_property: Optional connector property with a hint for
+ * the position of the output on the host's screen.
+ */
struct drm_property *suggested_x_property;
+ /**
+ * @suggested_y_property: Optional connector property with a hint for
+ * the position of the output on the host's screen.
+ */
struct drm_property *suggested_y_property;
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;
- /* whether async page flip is supported or not */
+ /**
+ * @async_page_flip: Does this device support async flips on the primary
+ * plane?
+ */
bool async_page_flip;
/**
--
2.8.1
More information about the Intel-gfx
mailing list