[Intel-gfx] [PATCH 4/7] drm/i915: Use the per-plane rotation property

Ville Syrjälä ville.syrjala at linux.intel.com
Wed Jul 20 14:13:06 UTC 2016


On Wed, Jul 20, 2016 at 04:57:32PM +0300, Joonas Lahtinen wrote:
> On ke, 2016-07-20 at 16:18 +0300, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > 
> > On certain platforms not all planes support the same set of
> > rotations/reflections, so let's use the per-plane property
> > for this.
> > 
> > This is already a problem on SKL when we use the legay cursor plane
> > as it only supports 0|180 whereas the universal planes support
> > 0|90|180|270, and it will be a problem on CHV soon.
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 51 +++++++++++++++++++-----------------
> >  drivers/gpu/drm/i915/intel_drv.h     |  4 +--
> >  drivers/gpu/drm/i915/intel_sprite.c  | 12 ++++++++-
> >  3 files changed, 40 insertions(+), 27 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 08b9f9a19df0..93ecb259c5ce 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -14217,6 +14217,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> >  	struct intel_plane *primary = NULL;
> >  	struct intel_plane_state *state = NULL;
> >  	const uint32_t *intel_primary_formats;
> > +	unsigned int supported_rotations;
> >  	unsigned int num_formats;
> >  	int ret;
> >  
> > @@ -14289,8 +14290,19 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
> >  	if (ret)
> >  		goto fail;
> >  
> > +	if (INTEL_INFO(dev)->gen >= 9) {
> > +		supported_rotations =
> > +			BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
> > +			BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270);
> > +	} else if (INTEL_INFO(dev)->gen >= 4) {
> > +		supported_rotations =
> > +			BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_180);
> > +	} else {
> > +		supported_rotations = BIT(DRM_ROTATE_0);
> > +	}
> > +
> 
> Might this be more informative if it was;
> 
> supported_rotations = BIT(DRM_ROTATE_0);
> 
> if (gen >= 4)
> 	supported_rotations |= BIT(DRM_ROTATE_180);
> 
> Then you could exclude too, for special platforms.

I think I prefer to have explicit "these platforms support exactly these things".
Less thinking required.

> 
> Also, use INTEL_GEN()
> 
> >  	if (INTEL_INFO(dev)->gen >= 4)
> > -		intel_create_rotation_property(dev, primary);
> > +		intel_create_rotation_property(primary, supported_rotations);
> >  
> >  	drm_plane_helper_add(&primary->base, &intel_plane_helper_funcs);
> >  
> > @@ -14303,22 +14315,20 @@ fail:
> >  	return NULL;
> >  }
> >  
> > -void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *plane)
> > +void intel_create_rotation_property(struct intel_plane *plane,
> > +				    unsigned int supported_rotations)
> >  {
> > -	if (!dev->mode_config.rotation_property) {
> > -		unsigned long flags = BIT(DRM_ROTATE_0) |
> > -			BIT(DRM_ROTATE_180);
> > +	struct drm_device *dev = plane->base.dev;
> >  
> > -		if (INTEL_INFO(dev)->gen >= 9)
> > -			flags |= BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270);
> > +	if (!plane->base.rotation_property)
> > +		plane->base.rotation_property =
> > +			drm_mode_create_rotation_property(dev,
> > +							  supported_rotations);
> >  
> > -		dev->mode_config.rotation_property =
> > -			drm_mode_create_rotation_property(dev, flags);
> > -	}
> > -	if (dev->mode_config.rotation_property)
> > +	if (plane->base.rotation_property)
> >  		drm_object_attach_property(&plane->base.base,
> > -				dev->mode_config.rotation_property,
> > -				plane->base.state->rotation);
> > +					   plane->base.rotation_property,
> > +					   plane->base.state->rotation);
> >  }
> >  
> >  static int
> > @@ -14449,17 +14459,10 @@ static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
> >  	if (ret)
> >  		goto fail;
> >  
> > -	if (INTEL_INFO(dev)->gen >= 4) {
> > -		if (!dev->mode_config.rotation_property)
> > -			dev->mode_config.rotation_property =
> > -				drm_mode_create_rotation_property(dev,
> > -							BIT(DRM_ROTATE_0) |
> > -							BIT(DRM_ROTATE_180));
> > -		if (dev->mode_config.rotation_property)
> > -			drm_object_attach_property(&cursor->base.base,
> > -				dev->mode_config.rotation_property,
> > -				state->base.rotation);
> > -	}
> > +	if (INTEL_INFO(dev)->gen >= 4)
> 
> INTEL_GEN() while touching it.
> 
> > +		intel_create_rotation_property(cursor,
> > +					       BIT(DRM_ROTATE_0) |
> > +					       BIT(DRM_ROTATE_180));
> >  
> >  	if (INTEL_INFO(dev)->gen >=9)
> >  		state->scaler_id = -1;
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 907a72cfdad3..2715aec979fc 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1255,8 +1255,8 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
> >  unsigned int intel_tile_height(const struct drm_i915_private *dev_priv,
> >  			       uint64_t fb_modifier, unsigned int cpp);
> >  
> > -void intel_create_rotation_property(struct drm_device *dev,
> > -					struct intel_plane *plane);
> > +void intel_create_rotation_property(struct intel_plane *plane,
> > +				    unsigned int supported_rotations);
> >  
> >  void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
> >  				    enum pipe pipe);
> > diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> > index cc6af1410d67..bc41c1bba04c 100644
> > --- a/drivers/gpu/drm/i915/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/intel_sprite.c
> > @@ -1046,6 +1046,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> >  	struct intel_plane_state *state = NULL;
> >  	unsigned long possible_crtcs;
> >  	const uint32_t *plane_formats;
> > +	unsigned int supported_rotations;
> >  	int num_plane_formats;
> >  	int ret;
> >  
> > @@ -1121,6 +1122,15 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> >  		goto fail;
> >  	}
> >  
> > +	if (INTEL_INFO(dev)->gen >= 9) {
> > +		supported_rotations =
> > +			BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
> > +			BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270);
> > +	} else {
> > +		supported_rotations =
> > +			BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_180);
> > +	}
> > +
> 
> Same here, I'd put the |='s in order so that new gens add features,
> making easier to get a picture of what was added at which point.
> 
> Regards, Joonas
> 
> >  	intel_plane->pipe = pipe;
> >  	intel_plane->plane = plane;
> >  	intel_plane->frontbuffer_bit = INTEL_FRONTBUFFER_SPRITE(pipe, plane);
> > @@ -1143,7 +1153,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> >  	if (ret)
> >  		goto fail;
> >  
> > -	intel_create_rotation_property(dev, intel_plane);
> > +	intel_create_rotation_property(intel_plane, supported_rotations);
> >  
> >  	drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs);
> >  
> -- 
> Joonas Lahtinen
> Open Source Technology Center
> Intel Corporation

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list