[Intel-gfx] [PATCH 14/18] drm/i915: Reuse legacy breadcrumbs + tail emission

Joonas Lahtinen joonas.lahtinen at linux.intel.com
Fri Jul 22 08:34:20 UTC 2016


On ke, 2016-07-20 at 14:12 +0100, Chris Wilson wrote:
> As GEN6+ is now a simple variant on the basic breadcrumbs + tail write,
> reuse the common code.
> 

Code motion could always be separate patch for easier review of what
functions were changed.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>

> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> ---
>  drivers/gpu/drm/i915/intel_ringbuffer.c | 71 ++++++++++++++-------------------
>  1 file changed, 29 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index 9c66745fc8d7..a74b42fc8f48 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -1414,25 +1414,18 @@ static int gen6_signal(struct drm_i915_gem_request *signaller_req)
>  	return 0;
>  }
>  
> -/**
> - * gen6_emit_request - Update the semaphore mailbox registers
> - *
> - * @request - request to write to the ring
> - *
> - * Update the mailbox registers in the *other* rings with the current seqno.
> - * This acts like a signal in the canonical semaphore.
> - */
> -static int gen6_emit_request(struct drm_i915_gem_request *req)
> +static void i9xx_submit_request(struct drm_i915_gem_request *request)
> +{
> +	struct drm_i915_private *dev_priv = request->i915;
> +
> +	I915_WRITE_TAIL(request->engine, request->tail);
> +}
> +
> +static int i9xx_emit_request(struct drm_i915_gem_request *req)
>  {
>  	struct intel_ring *ring = req->ring;
>  	int ret;
>  
> -	if (req->engine->semaphore.signal) {
> -		ret = req->engine->semaphore.signal(req);
> -		if (ret)
> -			return ret;
> -	}
> -
>  	ret = intel_ring_begin(req, 4);
>  	if (ret)
>  		return ret;
> @@ -1448,6 +1441,27 @@ static int gen6_emit_request(struct drm_i915_gem_request *req)
>  	return 0;
>  }
>  
> +/**
> + * gen6_emit_request - Update the semaphore mailbox registers
> + *
> + * @request - request to write to the ring
> + *
> + * Update the mailbox registers in the *other* rings with the current seqno.
> + * This acts like a signal in the canonical semaphore.
> + */
> +static int gen6_emit_request(struct drm_i915_gem_request *req)
> +{
> +	if (req->engine->semaphore.signal) {
> +		int ret;
> +
> +		ret = req->engine->semaphore.signal(req);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return i9xx_emit_request(req);
> +}
> +
>  static int gen8_render_emit_request(struct drm_i915_gem_request *req)
>  {
>  	struct intel_engine_cs *engine = req->engine;
> @@ -1682,33 +1696,6 @@ bsd_ring_flush(struct drm_i915_gem_request *req,
>  	return 0;
>  }
>  
> -static int i9xx_emit_request(struct drm_i915_gem_request *req)
> -{
> -	struct intel_ring *ring = req->ring;
> -	int ret;
> -
> -	ret = intel_ring_begin(req, 4);
> -	if (ret)
> -		return ret;
> -
> -	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
> -	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
> -	intel_ring_emit(ring, req->fence.seqno);
> -	intel_ring_emit(ring, MI_USER_INTERRUPT);
> -	intel_ring_advance(ring);
> -
> -	req->tail = intel_ring_get_tail(ring);
> -
> -	return 0;
> -}
> -
> -static void i9xx_submit_request(struct drm_i915_gem_request *request)
> -{
> -	struct drm_i915_private *dev_priv = request->i915;
> -
> -	I915_WRITE_TAIL(request->engine, request->tail);
> -}
> -
>  static void
>  gen6_irq_enable(struct intel_engine_cs *engine)
>  {
-- 
Joonas Lahtinen
Open Source Technology Center
Intel Corporation


More information about the Intel-gfx mailing list