[Intel-gfx] [PATCH] drm/i915: Only ignore eDP ports that are connected

Wed Jun 1 08:20:04 UTC 2016

On Wed, Jun 01, 2016 at 08:27:50AM +0100, Chris Wilson wrote:
> If the VBT says that a certain port should be eDP (and hence fused off
> from HDMI), but in reality it isn't, we need to try and acquire the HDMI
> connection instead. So only trust the VBT edp setting if we can connect
> to an eDP device on that port.
> 
> Fixes: d2182a6608 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV)
> References: https://bugs.freedesktop.org/show_bug.cgi?id=96288
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> Tested-by: Phidias Chiang <phidias.chiang at canonical.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 20 ++++++++++----------
>  drivers/gpu/drm/i915/intel_dp.c      | 13 ++++++-------
>  drivers/gpu/drm/i915/intel_drv.h     |  2 +-
>  3 files changed, 17 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 82796d1a87d7..0be8cede60e3 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -14642,6 +14642,8 @@ static void intel_setup_outputs(struct drm_device *dev)
>  		if (I915_READ(PCH_DP_D) & DP_DETECTED)
>  			intel_dp_init(dev, PCH_DP_D, PORT_D);
>  	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
> +		bool has_edp;
> +
>  		/*
>  		 * The DP_DETECTED bit is the latched state of the DDC
>  		 * SDA pin at boot. However since eDP doesn't require DDC
> @@ -14651,19 +14653,17 @@ static void intel_setup_outputs(struct drm_device *dev)
>  		 * eDP ports. Consult the VBT as well as DP_DETECTED to
>  		 * detect eDP ports.
>  		 */
> -		if (I915_READ(VLV_HDMIB) & SDVO_DETECTED &&
> -		    !intel_dp_is_edp(dev, PORT_B))
> +		has_edp = intel_dp_is_edp(dev, PORT_B);
> +		if (I915_READ(VLV_DP_B) & DP_DETECTED || has_edp)
> +			has_edp &= intel_dp_init(dev, VLV_DP_B, PORT_B);
> +		if (I915_READ(VLV_HDMIB) & SDVO_DETECTED && !has_edp)
>  			intel_hdmi_init(dev, VLV_HDMIB, PORT_B);
> -		if (I915_READ(VLV_DP_B) & DP_DETECTED ||
> -		    intel_dp_is_edp(dev, PORT_B))
> -			intel_dp_init(dev, VLV_DP_B, PORT_B);

This will change the order in which the connectors/encoders are 
registered. Shouldn't really matter. We use the DP,HDMI order on
some other platforms as well. I wonder if we should change everything
to use that order for consistency?

Also if the eDP init fails we'll not register a regular DP port, but
that's sort of OK since our eDP init doesn't actually check if the sink
is really eDP. Instead it just checks that DPCD can be read. So if we
would have a board with a normal user accesible DP connector which the
VBT claims to be eDP, we'd run into some hilarity when the user boots
w/o a display connected, yanks the cable after boot, or hotplugs in
another display. But I'm thinking we can just ignore that scenario
until we encounter such a board.

I'm happy enough with this as is, so
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

>  
> -		if (I915_READ(VLV_HDMIC) & SDVO_DETECTED &&
> -		    !intel_dp_is_edp(dev, PORT_C))
> +		has_edp = intel_dp_is_edp(dev, PORT_C);
> +		if (I915_READ(VLV_DP_C) & DP_DETECTED || has_edp)
> +			has_edp &= intel_dp_init(dev, VLV_DP_C, PORT_C);
> +		if (I915_READ(VLV_HDMIC) & SDVO_DETECTED && !has_edp)
>  			intel_hdmi_init(dev, VLV_HDMIC, PORT_C);
> -		if (I915_READ(VLV_DP_C) & DP_DETECTED ||
> -		    intel_dp_is_edp(dev, PORT_C))
> -			intel_dp_init(dev, VLV_DP_C, PORT_C);
>  
>  		if (IS_CHERRYVIEW(dev)) {
>  			/* eDP not supported on port D, so don't check VBT */
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 1d3824721c0a..d043b1384345 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -5565,9 +5565,9 @@ fail:
>  	return false;
>  }
>  
> -void
> -intel_dp_init(struct drm_device *dev,
> -	      i915_reg_t output_reg, enum port port)
> +bool intel_dp_init(struct drm_device *dev,
> +		   i915_reg_t output_reg,
> +		   enum port port)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_digital_port *intel_dig_port;
> @@ -5577,7 +5577,7 @@ intel_dp_init(struct drm_device *dev,
>  
>  	intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
>  	if (!intel_dig_port)
> -		return;
> +		return false;
>  
>  	intel_connector = intel_connector_alloc();
>  	if (!intel_connector)
> @@ -5634,7 +5634,7 @@ intel_dp_init(struct drm_device *dev,
>  	if (!intel_dp_init_connector(intel_dig_port, intel_connector))
>  		goto err_init_connector;
>  
> -	return;
> +	return true;
>  
>  err_init_connector:
>  	drm_encoder_cleanup(encoder);
> @@ -5642,8 +5642,7 @@ err_encoder_init:
>  	kfree(intel_connector);
>  err_connector_alloc:
>  	kfree(intel_dig_port);
> -
> -	return;
> +	return false;
>  }
>  
>  void intel_dp_mst_suspend(struct drm_device *dev)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index bef4ee90ca67..cb9dc596fb7e 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1328,7 +1328,7 @@ void intel_csr_ucode_suspend(struct drm_i915_private *);
>  void intel_csr_ucode_resume(struct drm_i915_private *);
>  
>  /* intel_dp.c */
> -void intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port port);
> +bool intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port port);
>  bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>  			     struct intel_connector *intel_connector);
>  void intel_dp_set_link_params(struct intel_dp *intel_dp,
> -- 
> 2.8.1

-- 
Ville Syrjälä
Intel OTC