[Intel-gfx] [PATCH 2/2] drm/i915: Crop cursor image for CHV pipe C cursor issue
Akshu Agrawal
akshu.agrawal at intel.com
Wed Jun 8 08:27:44 UTC 2016
CHV pipe C hits underrun when we get -ve X values of cursor. To avoid
this we crop the cursor image for by -ve X value and thus use '0' as
least X value.
Signed-off-by: Akshu Agrawal <akshu.agrawal at intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 113 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 3 +
2 files changed, 116 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bca9245..e6e6568 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14279,6 +14279,81 @@ void intel_create_rotation_property(struct drm_device *dev, struct intel_plane *
plane->base.state->rotation);
}
+static void vlv_unpin_buffer_obj(struct drm_i915_gem_object *obj,
+ char __iomem *buffer_start)
+{
+ iounmap(buffer_start);
+ i915_gem_object_ggtt_unpin(obj);
+}
+
+static char __iomem *vlv_pin_and_map_buffer_obj
+ (struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+ char __iomem *buffer_start;
+ int ret;
+
+ ret = i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, PIN_MAPPABLE);
+ if (ret)
+ return NULL;
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, true);
+ if (ret) {
+ i915_gem_object_ggtt_unpin(obj);
+ return NULL;
+ }
+
+ buffer_start = ioremap_wc(dev_priv->gtt.mappable_base +
+ i915_gem_obj_ggtt_offset(obj), obj->base.size);
+ if (buffer_start == NULL) {
+ i915_gem_object_ggtt_unpin(obj);
+ return NULL;
+ }
+
+ return buffer_start;
+}
+
+static int vlv_cursor_crop(struct intel_plane_state *state,
+ int prev_x)
+{
+ struct drm_i915_gem_object *obj = intel_fb_obj(state->base.fb);
+ struct drm_framebuffer *fb = state->base.fb;
+ char __iomem *buffer = state->vlv_cursor_image;
+ char __iomem *base, *cursor_base;
+ int size = obj->base.size;
+ int i, x = state->base.crtc_x;
+ int bytes_per_pixel = fb->bits_per_pixel / 8;
+
+ base = vlv_pin_and_map_buffer_obj(obj);
+ if (base == NULL)
+ return -ENOMEM;
+
+ if (prev_x >= 0) {
+ if (buffer != NULL)
+ kfree(buffer);
+ buffer = kzalloc(size, GFP_KERNEL);
+ state->vlv_cursor_image = buffer;
+ if (buffer == NULL)
+ return -ENOMEM;
+ memcpy(buffer, base, size);
+ }
+ cursor_base = buffer;
+ x = -x;
+ for (i = 0; i < state->base.crtc_h; i++) {
+ cursor_base += x * bytes_per_pixel;
+ memcpy(base, cursor_base,
+ (state->base.crtc_w - x) * bytes_per_pixel);
+ base += (state->base.crtc_w - x) * bytes_per_pixel;
+ memset(base, 0, x * bytes_per_pixel);
+ base += x * bytes_per_pixel;
+ cursor_base += (state->base.crtc_w - x) * bytes_per_pixel;
+ }
+
+ vlv_unpin_buffer_obj(obj, base);
+
+ return 0;
+}
+
static int
intel_check_cursor_plane(struct drm_plane *plane,
struct intel_crtc_state *crtc_state,
@@ -14287,8 +14362,10 @@ intel_check_cursor_plane(struct drm_plane *plane,
struct drm_crtc *crtc = crtc_state->base.crtc;
struct drm_framebuffer *fb = state->base.fb;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
+ enum pipe pipe = to_intel_plane(plane)->pipe;
unsigned stride;
int ret;
+ int crtc_prev_x = state->vlv_cursor_prev_x;
ret = drm_plane_helper_check_update(plane, crtc, fb, &state->src,
&state->dst, &state->clip,
@@ -14309,6 +14386,32 @@ intel_check_cursor_plane(struct drm_plane *plane,
return -EINVAL;
}
+ /*
+ * There is an issue in CHV PIPE C where we hit underrun on
+ * -ve value of cursor. To avoid this we are cropping the
+ * image for all PIPE C -ve values.
+ */
+ if (IS_CHERRYVIEW(plane->dev)) {
+ if (pipe == PIPE_C && state->visible &&
+ state->base.crtc_x < 0) {
+ ret = vlv_cursor_crop(state, crtc_prev_x);
+ if (ret)
+ return -ENOMEM;
+ } else if (crtc_prev_x < 0) { /* Restore the image back */
+ char __iomem *base;
+ char __iomem *org_image = state->vlv_cursor_image;
+ int size = obj->base.size;
+
+ if (org_image == NULL)
+ return -ENOMEM;
+ base = vlv_pin_and_map_buffer_obj(obj);
+ if (base == NULL)
+ return -ENOMEM;
+ memcpy(base, org_image, size);
+ vlv_unpin_buffer_obj(obj, base);
+ }
+ }
+
stride = roundup_pow_of_two(state->base.crtc_w) * 4;
if (obj->base.size < stride * state->base.crtc_h) {
DRM_DEBUG_KMS("buffer is too small\n");
@@ -14320,6 +14423,16 @@ intel_check_cursor_plane(struct drm_plane *plane,
return -EINVAL;
}
+ if (IS_CHERRYVIEW(plane->dev)) {
+ if (pipe == PIPE_C &&
+ state->visible && state->base.crtc_x < 0) {
+ state->vlv_cursor_prev_x = state->base.crtc_x;
+ state->base.crtc_x = 0;
+ } else {
+ state->vlv_cursor_prev_x = state->base.crtc_x;
+ }
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ebe7b34..0c406d1 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -350,6 +350,9 @@ struct intel_plane_state {
/* async flip related structures */
struct drm_i915_gem_request *wait_req;
+
+ char __iomem *vlv_cursor_image;
+ int vlv_cursor_prev_x;
};
struct intel_initial_plane_config {
--
1.9.1
More information about the Intel-gfx
mailing list