[Intel-gfx] [PATCH v4 09/11] drm/i915: Check pixel rate for DP to VGA dongle

[Ville Syrjälä]

On Mon, Jun 06, 2016 at 04:29:11PM +0300, Mika Kahola wrote:
> Filter out a mode that exceeds the max pixel rate setting
> for DP to VGA dongle. This is defined in DPCD register 0x81
> if detailed cap info i.e. info field is 4 bytes long and
> it is available for DP downstream port.
> 
> The register defines the pixel rate divided by 8 in MP/s.
> 
> v2: DPCD read outs and computation moved to drm (Ville, Daniel)
> v3: Sink pixel rate computation moved to drm_dp_max_sink_dotclock()
>     function (Daniel)
> v4: Use of drm_dp_helper.c routines to compute max pixel clock (Ville)
> 
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 096acbf0..1b94347 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -200,6 +200,23 @@ intel_dp_mode_valid(struct drm_connector *connector,
>  	int target_clock = mode->clock;
>  	int max_rate, mode_rate, max_lanes, max_link_clock;
>  	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> +	bool is_branch_device;
> +	int max_dp_clk;
> +	int type;
> +	uint8_t port_cap[4];
> +
> +	is_branch_device = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> +		DP_DWN_STRM_PORT_PRESENT;
> +
> +	if (is_branch_device) {
> +		drm_dp_downstream_port_cap(&intel_dp->aux, intel_dp->dpcd, port_cap);

I'm pretty sure we already read out the downstream port caps in fact.
Hmm, yeah ->downstream_ports. So no need for this, and I suppose no need
for your helper for the readout either. Just always readoing out the
full 16 bytes should be fine.

> +		type = drm_dp_downstream_type(intel_dp->dpcd, port_cap);
> +		max_dp_clk = drm_dp_downstream_max_clock(intel_dp->dpcd, port_cap);
> +
> +		if ((type == DP_DS_PORT_TYPE_VGA) && (max_dp_clk > 0)) {

Type check can be skipped if drm_dp_downstream_max_clock() just returns
0 for the "don't know" case.

> +			max_dotclk = min(max_dotclk, max_dp_clk);
> +		}
> +	}
>  
>  	if (is_edp(intel_dp) && fixed_mode) {
>  		if (mode->hdisplay > fixed_mode->hdisplay)
> -- 
> 1.9.1

-- 
Ville Syrjälä
Intel OTC