[Intel-gfx] [PATCH 3/8] drm/i915: Extract i915_gem_obj_prepare_shmem_write()
Joonas Lahtinen
joonas.lahtinen at linux.intel.com
Thu Jun 9 12:47:55 UTC 2016
On to, 2016-06-09 at 12:29 +0100, Chris Wilson wrote:
> This is a companion to i915_gem_obj_prepare_shmem_read() that prepares
> the backing storage for direct writes. It first serialises with the GPU,
> pins the backing storage and then indicates what clfushes are required in
> order for the writes to be coherent.
>
> Whilst here, fix support for ancient CPUs without clflush for which we
> cannot do the GTT+clflush tricks.
>
Could add here that WARN is kicked
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> ---
> drivers/gpu/drm/i915/i915_cmd_parser.c | 2 +-
> drivers/gpu/drm/i915/i915_drv.h | 6 +-
> drivers/gpu/drm/i915/i915_gem.c | 119 +++++++++++++++++++++------------
> 3 files changed, 83 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c
> index b0fd6a7b0603..de038da6c01b 100644
> --- a/drivers/gpu/drm/i915/i915_cmd_parser.c
> +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c
> @@ -970,7 +970,7 @@ static u32 *copy_batch(struct drm_i915_gem_object *dest_obj,
> u32 batch_start_offset,
> u32 batch_len)
> {
> - int needs_clflush = 0;
> + unsigned needs_clflush;
Mildly irritated by innuendo to boolean. Not sure why not just "flags".
> void *src_base, *src;
> void *dst = NULL;
> int ret;
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index b333cf4923bc..ef321f84e5fc 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3026,7 +3026,11 @@ void i915_gem_release_all_mmaps(struct drm_i915_private *dev_priv);
> void i915_gem_release_mmap(struct drm_i915_gem_object *obj);
>
> int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj,
> - int *needs_clflush);
> + unsigned *needs_clflush);
> +int i915_gem_obj_prepare_shmem_write(struct drm_i915_gem_object *obj,
> + unsigned *needs_clflush);
> +#define CLFLUSH_BEFORE 0x1
> +#define CLFLUSH_AFTER 0x2
>
> int __must_check i915_gem_object_get_pages(struct drm_i915_gem_object *obj);
>
> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
> index a41fa01eb024..c6d06cb21191 100644
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -563,34 +563,95 @@ __copy_from_user_swizzled(char *gpu_vaddr, int gpu_offset,
> * flush the object from the CPU cache.
> */
> int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj,
> - int *needs_clflush)
> + unsigned *needs_clflush)
> {
> int ret;
>
> *needs_clflush = 0;
> -
> - if (WARN_ON((obj->ops->flags & I915_GEM_OBJECT_HAS_STRUCT_PAGE) == 0))
> + if ((obj->ops->flags & I915_GEM_OBJECT_HAS_STRUCT_PAGE) == 0)
Why no more WARN?
> return -EINVAL;
>
> if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)) {
> + ret = i915_gem_object_wait_rendering(obj, true);
> + if (ret)
> + return ret;
> +
> /* If we're not in the cpu read domain, set ourself into the gtt
> * read domain and manually flush cachelines (if required). This
> * optimizes for the case when the gpu will dirty the data
> * anyway again before the next pread happens. */
> *needs_clflush = !cpu_cache_is_coherent(obj->base.dev,
> obj->cache_level);
Maybe add CLFLUSH_NONE and use ?:, this is deceiving now that it's not
boolean, and that's why the name should be changed too.
> - ret = i915_gem_object_wait_rendering(obj, true);
> + }
> +
> + ret = i915_gem_object_get_pages(obj);
> + if (ret)
> + return ret;
> +
> + i915_gem_object_pin_pages(obj);
> +
> + if (*needs_clflush && !boot_cpu_has(X86_FEATURE_CLFLUSH)) {
Your own comment applies here.
> + ret = i915_gem_object_set_to_cpu_domain(obj, false);
> + if (ret) {
> + i915_gem_object_unpin_pages(obj);
> + return ret;
> + }
> + *needs_clflush = 0;
> + }
> +
> + return 0;
> +}
> +
> +int i915_gem_obj_prepare_shmem_write(struct drm_i915_gem_object *obj,
> + unsigned *needs_clflush)
> +{
> + int ret;
> +
> + *needs_clflush = 0;
> + if ((obj->ops->flags & I915_GEM_OBJECT_HAS_STRUCT_PAGE) == 0)
> + return -EINVAL;
> +
> + if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
> + ret = i915_gem_object_wait_rendering(obj, false);
> if (ret)
> return ret;
> +
> + /* If we're not in the cpu write domain, set ourself into the
> + * gtt write domain and manually flush cachelines (as required).
> + * This optimizes for the case when the gpu will use the data
> + * right away and we therefore have to clflush anyway.
> + */
> + *needs_clflush |= cpu_write_needs_clflush(obj) << 1;
> }
>
> + /* Same trick applies to invalidate partially written cachelines read
> + * before writing.
> + */
> + if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0)
> + *needs_clflush |= !cpu_cache_is_coherent(obj->base.dev,
> + obj->cache_level);
> +
> ret = i915_gem_object_get_pages(obj);
> if (ret)
> return ret;
>
> i915_gem_object_pin_pages(obj);
>
> - return ret;
> + if (*needs_clflush && !boot_cpu_has(X86_FEATURE_CLFLUSH)) {
> + ret = i915_gem_object_set_to_cpu_domain(obj, true);
> + if (ret) {
> + i915_gem_object_unpin_pages(obj);
> + return ret;
> + }
> + *needs_clflush = 0;
> + }
Relatively large common mid-section in these two, static func?
Otherwise looks fine to me, those explained or fixed;
Reviewed-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Regards, Joonas
> +
> + if ((*needs_clflush & CLFLUSH_AFTER) == 0)
> + obj->cache_dirty = true;
> +
> + intel_fb_obj_invalidate(obj, ORIGIN_CPU);
> + obj->dirty = 1;
> + return 0;
> + }
>
> /* Per-page copy function for the shmem pread fastpath.
> @@ -999,41 +1060,17 @@ i915_gem_shmem_pwrite(struct drm_device *dev,
> int shmem_page_offset, page_length, ret = 0;
> int obj_do_bit17_swizzling, page_do_bit17_swizzling;
> int hit_slowpath = 0;
> - int needs_clflush_after = 0;
> - int needs_clflush_before = 0;
> + unsigned needs_clflush;
> struct sg_page_iter sg_iter;
>
> - user_data = u64_to_user_ptr(args->data_ptr);
> - remain = args->size;
> -
> - obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
> -
> - if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
> - /* If we're not in the cpu write domain, set ourself into the gtt
> - * write domain and manually flush cachelines (if required). This
> - * optimizes for the case when the gpu will use the data
> - * right away and we therefore have to clflush anyway. */
> - needs_clflush_after = cpu_write_needs_clflush(obj);
> - ret = i915_gem_object_wait_rendering(obj, false);
> - if (ret)
> - return ret;
> - }
> - /* Same trick applies to invalidate partially written cachelines read
> - * before writing. */
> - if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0)
> - needs_clflush_before =
> - !cpu_cache_is_coherent(dev, obj->cache_level);
> -
> - ret = i915_gem_object_get_pages(obj);
> + ret = i915_gem_obj_prepare_shmem_write(obj, &needs_clflush);
> if (ret)
> return ret;
>
> - intel_fb_obj_invalidate(obj, ORIGIN_CPU);
> -
> - i915_gem_object_pin_pages(obj);
> -
> + obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
> + user_data = u64_to_user_ptr(args->data_ptr);
> offset = args->offset;
> - obj->dirty = 1;
> + remain = args->size;
>
> for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents,
> offset >> PAGE_SHIFT) {
> @@ -1057,7 +1094,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev,
> /* If we don't overwrite a cacheline completely we need to be
> * careful to have up-to-date data by first clflushing. Don't
> * overcomplicate things and flush the entire patch. */
> - partial_cacheline_write = needs_clflush_before &&
> + partial_cacheline_write = needs_clflush & CLFLUSH_BEFORE &&
> ((shmem_page_offset | page_length)
> & (boot_cpu_data.x86_clflush_size - 1));
>
> @@ -1067,7 +1104,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev,
> ret = shmem_pwrite_fast(page, shmem_page_offset, page_length,
> user_data, page_do_bit17_swizzling,
> partial_cacheline_write,
> - needs_clflush_after);
> + needs_clflush & CLFLUSH_AFTER);
> if (ret == 0)
> goto next_page;
>
> @@ -1076,7 +1113,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev,
> ret = shmem_pwrite_slow(page, shmem_page_offset, page_length,
> user_data, page_do_bit17_swizzling,
> partial_cacheline_write,
> - needs_clflush_after);
> + needs_clflush & CLFLUSH_AFTER);
>
> mutex_lock(&dev->struct_mutex);
>
> @@ -1098,17 +1135,15 @@ out:
> * cachelines in-line while writing and the object moved
> * out of the cpu write domain while we've dropped the lock.
> */
> - if (!needs_clflush_after &&
> + if (!(needs_clflush & CLFLUSH_AFTER) &&
> obj->base.write_domain != I915_GEM_DOMAIN_CPU) {
> if (i915_gem_clflush_object(obj, obj->pin_display))
> - needs_clflush_after = true;
> + needs_clflush |= CLFLUSH_AFTER;
> }
> }
>
> - if (needs_clflush_after)
> + if (needs_clflush & CLFLUSH_AFTER)
> i915_gem_chipset_flush(to_i915(dev));
> - else
> - obj->cache_dirty = true;
>
> intel_fb_obj_flush(obj, false, ORIGIN_CPU);
> return ret;
--
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
More information about the Intel-gfx
mailing list