[Intel-gfx] [PATCH 6/7] drm/i915: Remove mostly duplicated video DIP handling from PSR code
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon Jun 13 12:27:15 UTC 2016
On Mon, Jun 13, 2016 at 05:39:47PM +0530, Sharma, Shashank wrote:
> Regards
> Shashank
>
> On 6/3/2016 1:25 AM, ville.syrjala at linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Now that the infoframe hooks are part of the intel_dig_port, we can use
> > the normal .write_infoframe() hook to update the VSC SDP. We do need to
> > deal with the size difference between the VSC DIP and the others though.
> >
> > Another minor snag is that the compiler will complain to use if we keep
> > using enum hdmi_infoframe_type type and passing in the DP define instead,
> > so et's just change to unsigned int all over for the inforframe type.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_drv.h | 2 +-
> > drivers/gpu/drm/i915/intel_hdmi.c | 26 +++++++++++++++----------
> > drivers/gpu/drm/i915/intel_psr.c | 41 ++++++++-------------------------------
> > 3 files changed, 25 insertions(+), 44 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 4c8451e3d8f1..5dcaa14ff90d 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -900,7 +900,7 @@ struct intel_digital_port {
> > /* for communication with audio component; protected by av_mutex */
> > const struct drm_connector *audio_connector;
> > void (*write_infoframe)(struct drm_encoder *encoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > const void *frame, ssize_t len);
> > void (*set_infoframes)(struct drm_encoder *encoder,
> > bool enable,
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index 637b17baf798..600a58210450 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -68,7 +68,7 @@ static struct intel_hdmi *intel_attached_hdmi(struct drm_connector *connector)
> > return enc_to_intel_hdmi(&intel_attached_encoder(connector)->base);
> > }
> >
> > -static u32 g4x_infoframe_index(enum hdmi_infoframe_type type)
> > +static u32 g4x_infoframe_index(unsigned int type)
> > {
> > switch (type) {
> > case HDMI_INFOFRAME_TYPE_AVI:
> > @@ -83,7 +83,7 @@ static u32 g4x_infoframe_index(enum hdmi_infoframe_type type)
> > }
> > }
> >
> > -static u32 g4x_infoframe_enable(enum hdmi_infoframe_type type)
> > +static u32 g4x_infoframe_enable(unsigned int type)
> > {
> > switch (type) {
> > case HDMI_INFOFRAME_TYPE_AVI:
> > @@ -98,9 +98,11 @@ static u32 g4x_infoframe_enable(enum hdmi_infoframe_type type)
> > }
> > }
> >
> > -static u32 hsw_infoframe_enable(enum hdmi_infoframe_type type)
> > +static u32 hsw_infoframe_enable(unsigned int type)
> > {
> > switch (type) {
> > + case DP_SDP_VSC:
> Why do we need a new field like this ? Would it make sense to set the
> type itself as "HDMI_INFOFRAME_TYPE_AVI" ?
We want to enable/write the VSC, not the AVI.
> > + return VIDEO_DIP_ENABLE_VSC_HSW;
> > case HDMI_INFOFRAME_TYPE_AVI:
> > return VIDEO_DIP_ENABLE_AVI_HSW;
> > case HDMI_INFOFRAME_TYPE_SPD:
> > @@ -116,10 +118,12 @@ static u32 hsw_infoframe_enable(enum hdmi_infoframe_type type)
> > static i915_reg_t
> > hsw_dip_data_reg(struct drm_i915_private *dev_priv,
> > enum transcoder cpu_transcoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > int i)
> > {
> > switch (type) {
> > + case DP_SDP_VSC:
> > + return HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder, i);
> > case HDMI_INFOFRAME_TYPE_AVI:
> > return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i);
> > case HDMI_INFOFRAME_TYPE_SPD:
> > @@ -133,7 +137,7 @@ hsw_dip_data_reg(struct drm_i915_private *dev_priv,
> > }
> >
> > static void g4x_write_infoframe(struct drm_encoder *encoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > const void *frame, ssize_t len)
> > {
> > const uint32_t *data = frame;
> > @@ -187,7 +191,7 @@ static bool g4x_infoframe_enabled(struct drm_encoder *encoder,
> > }
> >
> > static void ibx_write_infoframe(struct drm_encoder *encoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > const void *frame, ssize_t len)
> > {
> > const uint32_t *data = frame;
> > @@ -246,7 +250,7 @@ static bool ibx_infoframe_enabled(struct drm_encoder *encoder,
> > }
> >
> > static void cpt_write_infoframe(struct drm_encoder *encoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > const void *frame, ssize_t len)
> > {
> > const uint32_t *data = frame;
> > @@ -303,7 +307,7 @@ static bool cpt_infoframe_enabled(struct drm_encoder *encoder,
> > }
> >
> > static void vlv_write_infoframe(struct drm_encoder *encoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > const void *frame, ssize_t len)
> > {
> > const uint32_t *data = frame;
> > @@ -361,7 +365,7 @@ static bool vlv_infoframe_enabled(struct drm_encoder *encoder,
> > }
> >
> > static void hsw_write_infoframe(struct drm_encoder *encoder,
> > - enum hdmi_infoframe_type type,
> > + unsigned int type,
> > const void *frame, ssize_t len)
> > {
> > const uint32_t *data = frame;
> > @@ -371,6 +375,8 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
> > enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
> > i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
> > i915_reg_t data_reg;
> > + int data_size = type == DP_SDP_VSC ?
> Ok, I think may be this is the reason why we need a separate filed for
> DP_SDP_VSC, is it so ?
No, we need to regarless of the size of the buffer.
>
> - Shashank
> > + VIDEO_DIP_VSC_DATA_SIZE : VIDEO_DIP_DATA_SIZE;
> > int i;
> > u32 val = I915_READ(ctl_reg);
> >
> > @@ -386,7 +392,7 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
> > data++;
> > }
> > /* Write every possible data byte to force correct ECC calculation. */
> > - for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
> > + for (; i < data_size; i += 4)
> > I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
> > type, i >> 2), 0);
> > mmiowb();
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> > index 29a09bf6bd18..904994dd1c9e 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -72,37 +72,6 @@ static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
> > (val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
> > }
> >
> > -static void intel_psr_write_vsc(struct intel_dp *intel_dp,
> > - const struct edp_vsc_psr *vsc_psr)
> > -{
> > - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> > - struct drm_device *dev = dig_port->base.base.dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
> > - enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
> > - i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
> > - uint32_t *data = (uint32_t *) vsc_psr;
> > - unsigned int i;
> > -
> > - /* As per BSPec (Pipe Video Data Island Packet), we need to disable
> > - the video DIP being updated before program video DIP data buffer
> > - registers for DIP being updated. */
> > - I915_WRITE(ctl_reg, 0);
> > - POSTING_READ(ctl_reg);
> > -
> > - for (i = 0; i < sizeof(*vsc_psr); i += 4) {
> > - I915_WRITE(HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder,
> > - i >> 2), *data);
> > - data++;
> > - }
> > - for (; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4)
> > - I915_WRITE(HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder,
> > - i >> 2), 0);
> > -
> > - I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW);
> > - POSTING_READ(ctl_reg);
> > -}
> > -
> > static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
> > {
> > struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > @@ -121,6 +90,7 @@ static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
> >
> > static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
> > {
> > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > struct edp_vsc_psr psr_vsc;
> >
> > /* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
> > @@ -129,11 +99,14 @@ static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
> > psr_vsc.sdp_header.HB1 = 0x7;
> > psr_vsc.sdp_header.HB2 = 0x3;
> > psr_vsc.sdp_header.HB3 = 0xb;
> > - intel_psr_write_vsc(intel_dp, &psr_vsc);
> > +
> > + intel_dig_port->write_infoframe(&intel_dig_port->base.base,
> > + DP_SDP_VSC, &psr_vsc, sizeof(psr_vsc));
> > }
> >
> > static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
> > {
> > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > struct edp_vsc_psr psr_vsc;
> >
> > /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
> > @@ -142,7 +115,9 @@ static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
> > psr_vsc.sdp_header.HB1 = 0x7;
> > psr_vsc.sdp_header.HB2 = 0x2;
> > psr_vsc.sdp_header.HB3 = 0x8;
> > - intel_psr_write_vsc(intel_dp, &psr_vsc);
> > +
> > + intel_dig_port->write_infoframe(&intel_dig_port->base.base,
> > + DP_SDP_VSC, &psr_vsc, sizeof(psr_vsc));
> > }
> >
> > static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
> >
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list