[Intel-gfx] [PATCH v10 4/6] drm/i915: Interrupt driven fences
John.C.Harrison at Intel.com
John.C.Harrison at Intel.com
Thu Jun 16 12:54:38 UTC 2016
From: John Harrison <John.C.Harrison at Intel.com>
The intended usage model for struct fence is that the signalled status
should be set on demand rather than polled. That is, there should not
be a need for a 'signaled' function to be called everytime the status
is queried. Instead, 'something' should be done to enable a signal
callback from the hardware which will update the state directly. In
the case of requests, this is the seqno update interrupt. The idea is
that this callback will only be enabled on demand when something
actually tries to wait on the fence.
This change removes the polling test and replaces it with the callback
scheme. Each fence is added to a 'please poke me' list at the start of
i915_add_request(). The interrupt handler (via a deferred work queue)
then scans through the 'poke me' list when a new seqno pops out and
signals any matching fence/request. The fence is then removed from the
list so the entire request stack does not need to be scanned every
time. The fence is added to the list before the commands to generate
the seqno interrupt are added to the ring. Thus the sequence is
guaranteed to be race free if the interrupt is already enabled.
Note that the interrupt is only enabled on demand (i.e. when
__wait_request() is called). Thus there is still a potential race when
enabling the interrupt as the request may already have completed.
However, this is simply solved by calling the interrupt processing
code immediately after enabling the interrupt and thereby checking for
already completed requests.
Lastly, the ring clean up code has the possibility to cancel
outstanding requests (e.g. because TDR has reset the ring). These
requests will never get signalled and so must be removed from the
signal list manually. This is done by setting a 'cancelled' flag and
then calling the regular notify/retire code path rather than
attempting to duplicate the list manipulatation and clean up code in
multiple places. This also avoids any race condition where the
cancellation request might occur after/during the completion interrupt
actually arriving.
v2: Updated to take advantage of the request unreference no longer
requiring the mutex lock.
v3: Move the signal list processing around to prevent unsubmitted
requests being added to the list. This was occurring on Android
because the native sync implementation calls the
fence->enable_signalling API immediately on fence creation.
Updated after review comments by Tvrtko Ursulin. Renamed list nodes to
'link' instead of 'list'. Added support for returning an error code on
a cancelled fence. Update list processing to be more efficient/safer
with respect to spinlocks.
v5: Made i915_gem_request_submit a static as it is only ever called
from one place.
Fixed up the low latency wait optimisation. The time delay between the
seqno value being to memory and the drive's ISR running can be
significant, at least for the wait request micro-benchmark. This can
be greatly improved by explicitly checking for seqno updates in the
pre-wait busy poll loop. Also added some documentation comments to the
busy poll code.
Fixed up support for the faking of lost interrupts
(test_irq_rings/missed_irq_rings). That is, there is an IGT test that
tells the driver to loose interrupts deliberately and then check that
everything still works as expected (albeit much slower).
Updates from review comments: use non IRQ-save spinlocking, early exit
on WARN and improved comments (Tvrtko Ursulin).
v6: Updated to newer nigthly and resolved conflicts around the
wait_request busy spin optimisation. Also fixed a race condition
between this early exit path and the regular completion path.
v7: Updated to newer nightly - lots of ring -> engine renaming plus an
interface change on get_seqno(). Also added a list_empty() check
before acquring spinlocks and doing list processing.
v8: Updated to newer nightly - changes to request clean up code mean
non of the deferred free mess is needed any more.
v9: Moved the request completion processing out of the interrupt
handler and into a worker thread (Chris Wilson).
v10: Changed to an un-ordered work queue to allow parallel processing
of different engines. Also set the high priority flag for reduced
latency. Removed some unnecessary checks for invalid seqno values.
Improved/added some comments and WARNs. Moved a spinlock release a few
lines later to make the 'locked' parameter of
i915_gem_request_enable_interrupt redundant and removed it. Also
shuffled the function around in the file so as to make it static and
remove it from the header file. Corrected the use of
fence_signal_locked() to fence_signal() in the retire code. Dropped
the irq save part of the spin lock calls in the notify code as this is
no longer called from the ISR. Changed the call of
i915_gem_retire_requests_ring() in the reset cleanup code to
i915_gem_request_notify() instead as the former is just duplicating a
lot of operations.
[Review comments from Maarten Lankhorst & Tvrtko Ursulin]
Made the call to _notify() from _retire_requests_ring() conditional on
interrupts not being enabled as it is only a race condition work
around for that case.
Re-instated the lazy_coherency flag (but now on the _notify()
function) to reduce the overhead of retire_requests_ring() calling
_notify() lots and lots (even with the above check).
Updated for yet more nightly changes (u64 for fence context).
For: VIZ-5190
Signed-off-by: John Harrison <John.C.Harrison at Intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/i915_dma.c | 14 +-
drivers/gpu/drm/i915/i915_drv.h | 10 ++
drivers/gpu/drm/i915/i915_gem.c | 248 +++++++++++++++++++++++++++++---
drivers/gpu/drm/i915/i915_irq.c | 2 +
drivers/gpu/drm/i915/intel_lrc.c | 5 +
drivers/gpu/drm/i915/intel_ringbuffer.c | 5 +
drivers/gpu/drm/i915/intel_ringbuffer.h | 10 +-
7 files changed, 271 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 07edaed..298d447 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1019,9 +1019,18 @@ static int i915_workqueues_init(struct drm_i915_private *dev_priv)
if (dev_priv->wq == NULL)
goto out_err;
+ /*
+ * Making this work queue un-ordered means that request notifications
+ * for different engines can be processed in parallel across multiple
+ * CPU cores (if available).
+ */
+ dev_priv->req_wq = alloc_workqueue("i915-rq", WQ_HIGHPRI, I915_NUM_ENGINES);
+ if (dev_priv->req_wq == NULL)
+ goto out_free_wq;
+
dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
if (dev_priv->hotplug.dp_wq == NULL)
- goto out_free_wq;
+ goto out_free_req_wq;
dev_priv->gpu_error.hangcheck_wq =
alloc_ordered_workqueue("i915-hangcheck", 0);
@@ -1032,6 +1041,8 @@ static int i915_workqueues_init(struct drm_i915_private *dev_priv)
out_free_dp_wq:
destroy_workqueue(dev_priv->hotplug.dp_wq);
+out_free_req_wq:
+ destroy_workqueue(dev_priv->req_wq);
out_free_wq:
destroy_workqueue(dev_priv->wq);
out_err:
@@ -1044,6 +1055,7 @@ static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
{
destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
destroy_workqueue(dev_priv->hotplug.dp_wq);
+ destroy_workqueue(dev_priv->req_wq);
destroy_workqueue(dev_priv->wq);
}
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d753457..8a26db5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1849,6 +1849,9 @@ struct drm_i915_private {
*/
struct workqueue_struct *wq;
+ /* Work queue for request completion processing */
+ struct workqueue_struct *req_wq;
+
/* Display functions */
struct drm_i915_display_funcs display;
@@ -2356,6 +2359,10 @@ struct drm_i915_gem_request {
* Underlying object for implementing the signal/wait stuff.
*/
struct fence fence;
+ struct list_head signal_link;
+ bool cancelled;
+ bool irq_enabled;
+ bool signal_requested;
/** On Which ring this request was generated */
struct drm_i915_private *i915;
@@ -2457,6 +2464,9 @@ struct drm_i915_gem_request {
struct drm_i915_gem_request * __must_check
i915_gem_request_alloc(struct intel_engine_cs *engine,
struct i915_gem_context *ctx);
+void i915_gem_request_notify(struct intel_engine_cs *ring, bool fence_locked,
+ bool lazy_coherency);
+void i915_gem_request_worker(struct work_struct *work);
static inline bool i915_gem_request_completed(struct drm_i915_gem_request *req)
{
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 9a55b87..a2c761b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -39,6 +39,8 @@
#include <linux/pci.h>
#include <linux/dma-buf.h>
+static void i915_gem_request_submit(struct drm_i915_gem_request *req);
+
static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
static void
@@ -1251,9 +1253,8 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
{
struct intel_engine_cs *engine = i915_gem_request_get_engine(req);
struct drm_i915_private *dev_priv = req->i915;
- const bool irq_test_in_progress =
- ACCESS_ONCE(dev_priv->gpu_error.test_irq_rings) & intel_engine_flag(engine);
int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE;
+ uint32_t seqno;
DEFINE_WAIT(wait);
unsigned long timeout_expire;
s64 before = 0; /* Only to silence a compiler warning. */
@@ -1261,9 +1262,6 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
WARN(!intel_irqs_enabled(dev_priv), "IRQs disabled");
- if (list_empty(&req->list))
- return 0;
-
if (i915_gem_request_completed(req))
return 0;
@@ -1293,10 +1291,10 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
if (ret == 0)
goto out;
- if (!irq_test_in_progress && WARN_ON(!engine->irq_get(engine))) {
- ret = -ENODEV;
- goto out;
- }
+ /*
+ * Enable interrupt completion of the request.
+ */
+ fence_enable_sw_signaling(&req->fence);
for (;;) {
struct timer_list timer;
@@ -1320,6 +1318,19 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
break;
}
+ /*
+ * There is quite a lot of latency in the user interrupt
+ * path. So do an explicit seqno check and potentially
+ * remove all that delay.
+ */
+ if (req->engine->irq_seqno_barrier)
+ req->engine->irq_seqno_barrier(req->engine);
+ seqno = engine->get_seqno(engine);
+ if (i915_seqno_passed(seqno, req->seqno)) {
+ ret = 0;
+ break;
+ }
+
if (signal_pending_state(state, current)) {
ret = -ERESTARTSYS;
break;
@@ -1346,14 +1357,36 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
destroy_timer_on_stack(&timer);
}
}
- if (!irq_test_in_progress)
- engine->irq_put(engine);
finish_wait(&engine->irq_queue, &wait);
out:
trace_i915_gem_request_wait_end(req);
+ if (ret == 0) {
+ if (req->engine->irq_seqno_barrier)
+ req->engine->irq_seqno_barrier(req->engine);
+ seqno = engine->get_seqno(engine);
+ /*
+ * Check for the fast path case of the seqno being passed but
+ * the request not actually being signalled yet.
+ */
+ if (i915_seqno_passed(seqno, req->seqno) &&
+ !i915_gem_request_completed(req)) {
+ /*
+ * Make sure the request is marked as completed before
+ * returning. NB: Need to acquire the spinlock around
+ * the whole call to avoid a race condition when the
+ * interrupt handler is running concurrently and could
+ * cause this invocation to early exit even though the
+ * request has not actually been fully processed yet.
+ */
+ spin_lock_irq(&req->engine->fence_lock);
+ i915_gem_request_notify(req->engine, true, true);
+ spin_unlock_irq(&req->engine->fence_lock);
+ }
+ }
+
if (timeout) {
s64 tres = *timeout - (ktime_get_raw_ns() - before);
@@ -1419,6 +1452,11 @@ static void i915_gem_request_retire(struct drm_i915_gem_request *request)
{
trace_i915_gem_request_retire(request);
+ if (request->irq_enabled) {
+ request->engine->irq_put(request->engine);
+ request->irq_enabled = false;
+ }
+
/* We know the GPU must have read the request to have
* sent us the seqno + interrupt, so use the position
* of tail of the request to update the last known position
@@ -1432,6 +1470,22 @@ static void i915_gem_request_retire(struct drm_i915_gem_request *request)
list_del_init(&request->list);
i915_gem_request_remove_from_client(request);
+ /*
+ * In case the request is still in the signal pending list,
+ * e.g. due to being cancelled by TDR, preemption, etc.
+ */
+ if (!list_empty(&request->signal_link)) {
+ /*
+ * The request must be marked as cancelled and the underlying
+ * fence as failed. NB: There is no explicit fence fail API,
+ * there is only a manual poke and signal.
+ */
+ request->cancelled = true;
+ /* How to propagate to any associated sync_fence??? */
+ request->fence.status = -EIO;
+ fence_signal(&request->fence);
+ }
+
if (request->previous_context) {
if (i915.enable_execlists)
intel_lr_context_unpin(request->previous_context,
@@ -2699,6 +2753,12 @@ void __i915_add_request(struct drm_i915_gem_request *request,
*/
request->postfix = intel_ring_get_tail(ringbuf);
+ /*
+ * Add the fence to the pending list before emitting the commands to
+ * generate a seqno notification interrupt.
+ */
+ i915_gem_request_submit(request);
+
if (i915.enable_execlists)
ret = engine->emit_request(request);
else {
@@ -2789,22 +2849,157 @@ static void i915_gem_request_free(struct fence *req_fence)
call_rcu(&req->fence.rcu, i915_gem_request_free_rcu);
}
-static bool i915_gem_request_enable_signaling(struct fence *req_fence)
+/*
+ * The request is being actively waited on, so enable interrupt based
+ * completion signalling.
+ */
+static void i915_gem_request_enable_interrupt(struct drm_i915_gem_request *req)
{
- /* Interrupt driven fences are not implemented yet.*/
- WARN(true, "This should not be called!");
- return true;
+ struct drm_i915_private *dev_priv = req->engine->i915;
+ const bool irq_test_in_progress =
+ ACCESS_ONCE(dev_priv->gpu_error.test_irq_rings) &
+ intel_engine_flag(req->engine);
+
+ if (req->irq_enabled)
+ return;
+
+ if (irq_test_in_progress)
+ return;
+
+ if (req->engine->irq_get(req->engine))
+ req->irq_enabled = true;
+ else
+ WARN(1, "Failed to get IRQ!");
+
+ /*
+ * Because the interrupt is only enabled on demand, there is a race
+ * where the interrupt can fire before anyone is looking for it. So
+ * do an explicit check for missed interrupts.
+ */
+ i915_gem_request_notify(req->engine, true, false);
}
-static bool i915_gem_request_is_completed(struct fence *req_fence)
+static bool i915_gem_request_enable_signaling(struct fence *req_fence)
{
struct drm_i915_gem_request *req = container_of(req_fence,
typeof(*req), fence);
+
+ /*
+ * No need to actually enable interrupt based processing until the
+ * request has been submitted to the hardware. At which point
+ * 'i915_gem_request_submit()' is called. So only really enable
+ * signalling in there. Just set a flag to say that interrupts are
+ * wanted when the request is eventually submitted. On the other hand
+ * if the request has already been submitted then interrupts do need
+ * to be enabled now.
+ */
+
+ req->signal_requested = true;
+
+ if (!list_empty(&req->signal_link))
+ i915_gem_request_enable_interrupt(req);
+
+ return true;
+}
+
+/*
+ * The request is about to be submitted to the hardware so add the fence to
+ * the list of signalable fences.
+ *
+ * NB: This does not necessarily enable interrupts yet. That only occurs on
+ * demand when the request is actually waited on. However, adding it to the
+ * list early ensures that there is no race condition where the interrupt
+ * could pop out prematurely and thus be completely lost. The race is merely
+ * that the interrupt must be manually checked for after being enabled.
+ */
+static void i915_gem_request_submit(struct drm_i915_gem_request *req)
+{
+ /*
+ * Always enable signal processing for the request's fence object
+ * before that request is submitted to the hardware. Thus there is no
+ * race condition whereby the interrupt could pop out before the
+ * request has been added to the signal list. Hence no need to check
+ * for completion, undo the list add and return false.
+ */
+ i915_gem_request_reference(req);
+
+ spin_lock_irq(&req->engine->fence_lock);
+
+ WARN_ON(!list_empty(&req->signal_link));
+ list_add_tail(&req->signal_link, &req->engine->fence_signal_list);
+
+ /*
+ * NB: Interrupts are only enabled on demand. Thus there is still a
+ * race where the request could complete before the interrupt has
+ * been enabled. Thus care must be taken at that point.
+ */
+
+ /* Have interrupts already been requested? */
+ if (req->signal_requested)
+ i915_gem_request_enable_interrupt(req);
+
+ spin_unlock_irq(&req->engine->fence_lock);
+}
+
+/**
+ * i915_gem_request_worker - request work handler callback.
+ * @work: Work structure
+ * Called in response to a seqno interrupt to process the completed requests.
+ */
+void i915_gem_request_worker(struct work_struct *work)
+{
+ struct intel_engine_cs *engine;
+
+ engine = container_of(work, struct intel_engine_cs, request_work);
+ i915_gem_request_notify(engine, false, false);
+}
+
+void i915_gem_request_notify(struct intel_engine_cs *engine, bool fence_locked,
+ bool lazy_coherency)
+{
+ struct drm_i915_gem_request *req, *req_next;
u32 seqno;
- seqno = req->engine->get_seqno(req->engine);
+ /*
+ * Note that this is safe to do before acquiring the spinlock as any
+ * items are only added to the list before enabling interrupts. Hence
+ * this can't be run while the list is transitioning from empty to
+ * not-empty. And a false not-empty is not an issue - it would just be
+ * the same as not doing the early exit test at all.
+ */
+ if (list_empty(&engine->fence_signal_list))
+ return;
+
+ if (!fence_locked)
+ spin_lock_irq(&engine->fence_lock);
+
+ if (!lazy_coherency && engine->irq_seqno_barrier)
+ engine->irq_seqno_barrier(engine);
+ seqno = engine->get_seqno(engine);
+
+ list_for_each_entry_safe(req, req_next, &engine->fence_signal_list, signal_link) {
+ if (!req->cancelled && !i915_seqno_passed(seqno, req->seqno))
+ break;
+
+ /*
+ * Start by removing the fence from the signal list otherwise
+ * the retire code can run concurrently and get confused.
+ */
+ list_del_init(&req->signal_link);
+
+ if (!req->cancelled)
+ fence_signal_locked(&req->fence);
+
+ if (req->irq_enabled) {
+ req->engine->irq_put(req->engine);
+ req->irq_enabled = false;
+ }
+
+ i915_gem_request_unreference(req);
+ }
- return i915_seqno_passed(seqno, req->seqno);
+ if (!fence_locked)
+ spin_unlock_irq(&engine->fence_lock);
}
static const char *i915_gem_request_get_driver_name(struct fence *req_fence)
@@ -2851,7 +3046,6 @@ static void i915_gem_request_fence_value_str(struct fence *req_fence,
static const struct fence_ops i915_gem_request_fops = {
.enable_signaling = i915_gem_request_enable_signaling,
- .signaled = i915_gem_request_is_completed,
.wait = fence_default_wait,
.release = i915_gem_request_free,
.get_driver_name = i915_gem_request_get_driver_name,
@@ -2933,6 +3127,7 @@ __i915_gem_request_alloc(struct intel_engine_cs *engine,
req->ctx = ctx;
i915_gem_context_reference(req->ctx);
+ INIT_LIST_HEAD(&req->signal_link);
fence_init(&req->fence, &i915_gem_request_fops, &engine->fence_lock,
ctx->engine[engine->id].fence_timeline.fence_context,
i915_fence_timeline_get_next_seqno(&ctx->engine[engine->id].fence_timeline));
@@ -3067,6 +3262,12 @@ static void i915_gem_reset_engine_cleanup(struct drm_i915_private *dev_priv,
i915_gem_request_retire(request);
}
+ /*
+ * Make sure that any requests that were on the signal pending list also
+ * get cleaned up.
+ */
+ i915_gem_request_notify(engine, false, false);
+
/* Having flushed all requests from all queues, we know that all
* ringbuffers must now be empty. However, since we do not reclaim
* all space when retiring the request (to prevent HEADs colliding
@@ -3114,6 +3315,14 @@ i915_gem_retire_requests_ring(struct intel_engine_cs *engine)
{
WARN_ON(i915_verify_lists(engine->dev));
+ /*
+ * If no-one has waited on a request recently then interrupts will
+ * not have been enabled and thus no requests will ever be marked as
+ * completed. So do an interrupt check now.
+ */
+ if(engine->irq_refcount == 0)
+ i915_gem_request_notify(engine, false, true);
+
/* Retire requests first as we use it above for the early return.
* If we retire requests last, we may use a later seqno and so clear
* the requests lists without clearing the active list, leading to
@@ -5146,6 +5355,7 @@ init_engine_lists(struct intel_engine_cs *engine)
{
INIT_LIST_HEAD(&engine->active_list);
INIT_LIST_HEAD(&engine->request_list);
+ INIT_LIST_HEAD(&engine->fence_signal_list);
}
void
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 72c04d6..c5024e7 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -982,6 +982,8 @@ static void notify_ring(struct intel_engine_cs *engine)
trace_i915_gem_request_notify(engine);
engine->user_interrupts++;
+ queue_work(engine->i915->req_wq, &engine->request_work);
+
wake_up_all(&engine->irq_queue);
}
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index b59ef1e..6fbb05e 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1922,6 +1922,8 @@ void intel_logical_ring_cleanup(struct intel_engine_cs *engine)
dev_priv = engine->i915;
+ cancel_work_sync(&engine->request_work);
+
if (engine->buffer) {
intel_logical_ring_stop(engine);
WARN_ON((I915_READ_MODE(engine) & MODE_IDLE) == 0);
@@ -2070,6 +2072,7 @@ logical_ring_setup(struct drm_device *dev, enum intel_engine_id id)
INIT_LIST_HEAD(&engine->active_list);
INIT_LIST_HEAD(&engine->request_list);
+ INIT_LIST_HEAD(&engine->fence_signal_list);
INIT_LIST_HEAD(&engine->buffers);
INIT_LIST_HEAD(&engine->execlist_queue);
spin_lock_init(&engine->execlist_lock);
@@ -2078,6 +2081,8 @@ logical_ring_setup(struct drm_device *dev, enum intel_engine_id id)
tasklet_init(&engine->irq_tasklet,
intel_lrc_irq_handler, (unsigned long)engine);
+ INIT_WORK(&engine->request_work, i915_gem_request_worker);
+
logical_ring_init_platform_invariants(engine);
logical_ring_default_vfuncs(engine);
logical_ring_default_irqs(engine, info->irq_shift);
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index df36da7..b2aea2b 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -2326,6 +2326,7 @@ static int intel_init_ring_buffer(struct drm_device *dev,
INIT_LIST_HEAD(&engine->request_list);
INIT_LIST_HEAD(&engine->execlist_queue);
INIT_LIST_HEAD(&engine->buffers);
+ INIT_LIST_HEAD(&engine->fence_signal_list);
spin_lock_init(&engine->fence_lock);
i915_gem_batch_pool_init(dev, &engine->batch_pool);
memset(engine->semaphore.sync_seqno, 0,
@@ -2333,6 +2334,8 @@ static int intel_init_ring_buffer(struct drm_device *dev,
init_waitqueue_head(&engine->irq_queue);
+ INIT_WORK(&engine->request_work, i915_gem_request_worker);
+
ringbuf = intel_engine_create_ringbuffer(engine, 32 * PAGE_SIZE);
if (IS_ERR(ringbuf)) {
ret = PTR_ERR(ringbuf);
@@ -2379,6 +2382,8 @@ void intel_cleanup_engine(struct intel_engine_cs *engine)
dev_priv = engine->i915;
+ cancel_work_sync(&engine->request_work);
+
if (engine->buffer) {
intel_stop_engine(engine);
WARN_ON(!IS_GEN2(dev_priv) && (I915_READ_MODE(engine) & MODE_IDLE) == 0);
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 01f3df6..9e79fbd 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -347,11 +347,15 @@ struct intel_engine_cs {
u32 (*get_cmd_length_mask)(u32 cmd_header);
/*
- * This spinlock is used by the fence implementation internally. Note,
- * it can be acquire from interrupt context so all usage must be IRQ
- * safe.
+ * This spinlock is used by the fence implementation internally and by
+ * the i915 driver for operations on the fence_signal_list and on fences
+ * in general. Note, it can be acquire from interrupt context so all
+ * usage must be IRQ safe.
*/
spinlock_t fence_lock;
+ struct list_head fence_signal_list;
+
+ struct work_struct request_work;
};
static inline bool
--
1.9.1
More information about the Intel-gfx
mailing list