[Intel-gfx] i915 driver on Minnow board - 1920x1200 resolution not working
vinoth eswaran
evinoth1206 at gmail.com
Tue Jun 21 11:07:50 UTC 2016
On Tue, Jun 21, 2016 at 12:54 PM, Jani Nikula
<jani.nikula at linux.intel.com> wrote:
> On Tue, 21 Jun 2016, vinoth eswaran <evinoth1206 at gmail.com> wrote:
>> On Tue, Jun 21, 2016 at 11:35 AM, Jani Nikula
>> <jani.nikula at linux.intel.com> wrote:
>>> On Tue, 21 Jun 2016, vinoth eswaran <evinoth1206 at gmail.com> wrote:
>>>> On Tue, Jun 21, 2016 at 10:17 AM, Jani Nikula
>>>> <jani.nikula at linux.intel.com> wrote:
>>>>> On Tue, 21 Jun 2016, vinoth eswaran <evinoth1206 at gmail.com> wrote:
>>>>>> Hello,
>>>>>>
>>>>>> I am currently working on an embedded project using Minnowboard max. I
>>>>>> have builded a customized Linux kernel-v4.4 and using u-boot (latest
>>>>>> version) as Boot loader.
>>>>>>
>>>>>> The VESA driver in the u-boot takes more time to initialize,so I have
>>>>>> disabled it. I am passing the kernel parameters "video=" to enable the
>>>>>> HDMI port to which a monitor is connected.
>>>>>
>>>>> Is is a DVI display?
>>>> Its an LED Monitor - LG 24EB23.
>>>> The monitor supports the HD resolution.
>>>
>>> How do you connect the display? Is it HDMI directly or using the DVI
>>> connector?
>>>
>> Sorry initially I got the question wrongly.
>> Micro HDMI connector to the board and then HDMI-DVI cable to connect
>> to the monitor.
>
> Single link DVI is limited to 165 Mhz. It *might* work with CVT and
> reduced blanking. Please try video=HDMI-A-1:1920x1200 at 60RMD as the mode.
>
> I'm surprised the display doesn't report that via EDID to begin with;
> what does it do without the video parameter on the command line?
The display is not coming up now. Also without no video parameter,
the display is not coming up.
I checked the status of card-0* in /sys/class/drm all the three
connectors are listed as disconnected.
I have attached the drm driver logs for your reference.
Regards,
Vinothkumar
> BR,
> Jani.
>
>
> --
> Jani Nikula, Intel Open Source Technology Center
-------------- next part --------------
root at minnowturbot:~# dmesg | grep -i 'drm\|i915'
[ 0.000000] Command line: console=ttyS0,115200 quiet initcall_debug=1 video=HDMI-A-1:1920x1200 at 60RMD video=VGA-1:d video=DP-1:d drm.debug=0x06 i915.fastboot=1
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty0 console=ttyS0,115200 quiet initcall_debug=1 video=HDMI-A-1:1920x1200 at 60RMD video=VGA-1:d video=DP-1:d drm.debug=0x06 i915.fastboot=1
[ 0.217361] calling drm_core_init+0x0/0xed @ 1
[ 0.217408] [drm] Initialized drm 1.1.0 20060810
[ 0.217418] initcall drm_core_init+0x0/0xed returned 0 after 46 usecs
[ 0.217426] calling i915_init+0x0/0x99 @ 1
[ 0.219700] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0f31 rev=0x11 flags=is_mobile,need_gfx_hws,is_valleyview,has_hotplug,
[ 0.219740] [drm:intel_detect_pch] No PCH found.
[ 0.219824] [drm] Memory usable by graphics device = 2048M
[ 0.219830] [drm:i915_gem_gtt_init] GMADR size = 256M
[ 0.219834] [drm:i915_gem_gtt_init] GTT stolen size = 64M
[ 0.219838] [drm:i915_gem_gtt_init] ppgtt mode: 1
[ 0.219843] [drm] Replacing VGA console driver
[ 0.219933] [drm:intel_opregion_setup] graphic opregion physical addr: 0x0
[ 0.219938] [drm:intel_opregion_setup] ACPI OpRegion not supported!
[ 0.220204] [drm:intel_device_info_runtime_init] slice total: 0
[ 0.220209] [drm:intel_device_info_runtime_init] subslice total: 0
[ 0.220213] [drm:intel_device_info_runtime_init] subslice per slice: 0
[ 0.220216] [drm:intel_device_info_runtime_init] EU total: 0
[ 0.220220] [drm:intel_device_info_runtime_init] EU per subslice: 0
[ 0.220224] [drm:intel_device_info_runtime_init] has slice power gating: n
[ 0.220227] [drm:intel_device_info_runtime_init] has subslice power gating: n
[ 0.220231] [drm:intel_device_info_runtime_init] has EU power gating: n
[ 0.220235] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.220238] [drm] Driver supports precise vblank timestamp query.
[ 0.220243] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
[ 0.220252] i915 0000:00:02.0: Invalid ROM contents
[ 0.225745] [drm] failed to find VBIOS tables
[ 0.225867] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 65536K
[ 0.233200] [drm:vlv_cmnlane_wa] toggling display PHY side reset
[ 0.244357] [drm:intel_power_well_enable] enabling always-on
[ 0.244363] [drm:intel_power_well_enable] enabling display
[ 0.246403] [drm:intel_power_well_enable] enabling dpio-tx-b-01
[ 0.248446] [drm:intel_power_well_enable] enabling dpio-tx-b-23
[ 0.251597] [drm:intel_power_well_enable] enabling dpio-tx-c-01
[ 0.254990] [drm:intel_power_well_enable] enabling dpio-tx-c-23
[ 0.256241] [drm:intel_power_well_enable] enabling dpio-common
[ 0.301718] [drm:intel_modeset_init] 2 display pipes available.
[ 0.305316] [drm:intel_update_czclk] CZ clock rate: 266667 kHz
[ 0.307278] [drm:intel_update_cdclk] Current CD clock rate: 320000 kHz
[ 0.307284] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
[ 0.307288] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
[ 0.307645] [drm] forcing VGA-1 connector OFF
[ 0.307651] [drm:drm_connector_get_cmdline_mode] cmdline mode for connector VGA-1 0x0 at 60Hz
[ 0.307767] [drm:intel_crt_reset] crt adpa set to 0xf40000
[ 0.307893] [drm:intel_dp_init_connector] Adding DP connector on port B
[ 0.307914] [drm] forcing DP-1 connector OFF
[ 0.307920] [drm:drm_connector_get_cmdline_mode] cmdline mode for connector DP-1 0x0 at 60Hz
[ 0.308020] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
[ 0.308103] [drm:intel_dsi_init]
[ 0.308116] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: disabled
[ 0.308123] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: disabled
[ 0.308129] [drm:intel_modeset_readout_hw_state] [ENCODER:30:DAC-30] hw state readout: disabled, pipe A
[ 0.308136] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
[ 0.308141] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: disabled, pipe A
[ 0.308147] [drm:intel_modeset_readout_hw_state] [CONNECTOR:29:VGA-1] hw state readout: disabled
[ 0.308152] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:HDMI-A-1] hw state readout: disabled
[ 0.308157] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:DP-1] hw state readout: disabled
[ 0.308167] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff880077c58400 for pipe A
[ 0.308171] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 0.308174] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 0.308179] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.308184] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.308189] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 0.308193] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 0.308197] [drm:intel_dump_pipe_config] requested mode:
[ 0.308203] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.308207] [drm:intel_dump_pipe_config] adjusted mode:
[ 0.308213] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.308218] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 0.308222] [drm:intel_dump_pipe_config] port clock: 0
[ 0.308226] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 0.308230] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 0.308235] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.308239] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 0.308285] [drm:intel_dump_pipe_config] ips: 0
[ 0.308290] [drm:intel_dump_pipe_config] double wide: 0
[ 0.308294] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[ 0.308298] [drm:intel_dump_pipe_config] planes on this crtc
[ 0.308303] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
[ 0.308308] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[ 0.308313] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 0.308318] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.2 idx: 3 disabled, scaler_id = 0
[ 0.308325] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880077c59800 for pipe B
[ 0.308328] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 0.308332] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 0.308337] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.308342] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 0.308347] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 0.308351] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 0.308354] [drm:intel_dump_pipe_config] requested mode:
[ 0.308360] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.308363] [drm:intel_dump_pipe_config] adjusted mode:
[ 0.308369] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 0.308375] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 0.308378] [drm:intel_dump_pipe_config] port clock: 0
[ 0.308382] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 0.308386] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 0.308391] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 0.308395] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 0.308398] [drm:intel_dump_pipe_config] ips: 0
[ 0.308402] [drm:intel_dump_pipe_config] double wide: 0
[ 0.308406] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[ 0.308410] [drm:intel_dump_pipe_config] planes on this crtc
[ 0.308415] [drm:intel_dump_pipe_config] STANDARD PLANE:24 plane: 1.0 idx: 4 disabled, scaler_id = 0
[ 0.308420] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 1.2 idx: 5 disabled, scaler_id = 0
[ 0.308425] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 1.1 idx: 6 disabled, scaler_id = 0
[ 0.308430] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.2 idx: 7 disabled, scaler_id = 0
[ 0.308439] [drm:vlv_get_fifo_size] Pipe A primary A FIFO size: 256
[ 0.308445] [drm:vlv_get_fifo_size] Pipe A sprite A FIFO size: 128
[ 0.308450] [drm:vlv_get_fifo_size] Pipe A sprite B FIFO size: 127
[ 0.308455] [drm:vlv_get_fifo_size] Pipe B primary B FIFO size: 256
[ 0.308460] [drm:vlv_get_fifo_size] Pipe B sprite C FIFO size: 128
[ 0.308465] [drm:vlv_get_fifo_size] Pipe B sprite D FIFO size: 127
[ 0.308470] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15
[ 0.308475] [drm:vlv_wm_get_hw_state] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15
[ 0.308480] [drm:vlv_wm_get_hw_state] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0
[ 0.308499] [drm:intel_power_well_disable] disabling dpio-common
[ 0.316293] [drm:intel_power_well_disable] disabling dpio-tx-c-23
[ 0.324291] [drm:intel_power_well_disable] disabling dpio-tx-c-01
[ 0.332375] [drm:intel_power_well_disable] disabling dpio-tx-b-23
[ 0.340524] [drm:intel_power_well_disable] disabling dpio-tx-b-01
[ 0.348673] [drm:intel_power_well_disable] disabling display
[ 0.356826] [drm:intel_power_well_disable] disabling always-on
[ 0.356842] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, 7ffff000]
[ 0.359855] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
[ 0.362599] [drm:i915_gem_context_init] HW context support initialized
[ 0.362612] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[ 0.362620] [drm:i915_pages_create_for_stolen] offset=0x0, size=131072
[ 0.362648] [drm:init_status_page] render ring hws offset: 0x00001000
[ 0.362718] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00024000
[ 0.362725] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[ 0.362731] [drm:i915_pages_create_for_stolen] offset=0x20000, size=131072
[ 0.362753] [drm:init_status_page] bsd ring hws offset: 0x00025000
[ 0.362787] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[ 0.362794] [drm:i915_pages_create_for_stolen] offset=0x40000, size=131072
[ 0.362818] [drm:init_status_page] blitter ring hws offset: 0x00048000
[ 0.364439] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
[ 0.364446] [drm:i915_pages_create_for_stolen] offset=0x3efa000, size=24576
[ 0.364452] [drm:valleyview_setup_pctx] PCBR: 0x7fefa001
[ 0.366338] [drm:valleyview_init_gt_powersave] DDR speed: 1066 MHz
[ 0.368383] [drm:valleyview_init_gt_powersave] max GPU freq: 668 MHz (213)
[ 0.372463] [drm:valleyview_init_gt_powersave] RPe GPU freq: 534 MHz (207)
[ 0.374505] [drm:valleyview_init_gt_powersave] RP1(Guar Freq) GPU freq: 534 MHz (207)
[ 0.376549] [drm:valleyview_init_gt_powersave] min GPU freq: 178 MHz (191)
[ 0.378592] [drm:intel_update_cdclk] Current CD clock rate: 320000 kHz
[ 0.378615] [drm:intel_fbdev_init_bios] pipe A not active or no fb, skipping
[ 0.378620] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
[ 0.378624] [drm:intel_fbdev_init_bios] no active fbs found, not using BIOS config
[ 0.378670] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:VGA-1]
[ 0.378679] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:VGA-1] disconnected
[ 0.378687] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.378690] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
[ 0.378694] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
[ 0.378700] [drm:intel_power_well_enable] enabling display
[ 0.378808] initcall i915_init+0x0/0x99 returned 0 after 157426 usecs
[ 0.386446] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[ 0.475447] [drm:intel_hdmi_detect] Live status not up!
[ 0.475457] [drm:intel_power_well_disable] disabling display
[ 0.483622] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] status updated from 3 to 2
[ 0.483635] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
[ 0.483642] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1]
[ 0.483647] [drm:intel_dp_force] [CONNECTOR:37:DP-1]
[ 0.483651] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected
[ 0.483658] i915 0000:00:02.0: No connectors reported connected with modes
[ 0.483662] [drm:drm_setup_crtcs]
[ 0.483668] [drm:drm_enable_connectors] connector 29 enabled? no
[ 0.483672] [drm:drm_enable_connectors] connector 32 enabled? no
[ 0.483675] [drm:drm_enable_connectors] connector 37 enabled? no
[ 0.483681] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[ 0.483685] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[ 0.483688] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[ 0.483692] [drm:intel_fb_initial_config] Not using firmware configuration
[ 0.483697] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[ 0.483702] [drm] Cannot find any crtc or sizes - going 1024x768
[ 0.483706] [drm:intelfb_create] no BIOS fb, allocating a new one
[ 0.483711] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000
[ 0.483727] [drm:i915_pages_create_for_stolen] offset=0x60000, size=3145728
[ 0.485323] [drm:intelfb_create] allocated 1024x768 fb: 0x00080000, bo ffff880077f70000
[ 0.485452] [drm:drm_fb_helper_hotplug_event]
[ 0.485459] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:VGA-1]
[ 0.485463] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:VGA-1] disconnected
[ 0.485469] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
[ 0.485473] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
[ 0.485478] [drm:intel_power_well_enable] enabling display
[ 0.485633] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.493543] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[ 0.581567] [drm:intel_hdmi_detect] Live status not up!
[ 0.581578] [drm:intel_power_well_disable] disabling display
[ 0.589760] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
[ 0.589770] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1]
[ 0.589775] [drm:intel_dp_force] [CONNECTOR:37:DP-1]
[ 0.589779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected
[ 0.589789] [drm:drm_setup_crtcs]
[ 0.589795] [drm:drm_enable_connectors] connector 29 enabled? no
[ 0.589799] [drm:drm_enable_connectors] connector 32 enabled? no
[ 0.589803] [drm:drm_enable_connectors] connector 37 enabled? no
[ 0.589808] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[ 0.589812] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[ 0.589816] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[ 0.589820] [drm:intel_fb_initial_config] Not using firmware configuration
[ 0.589824] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[ 1.726081] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[ 1.730234] [drm:valleyview_enable_rps] GPLL enabled? yes
[ 1.730243] [drm:valleyview_enable_rps] GPU status: 0x0000cf90
[ 1.730249] [drm:valleyview_enable_rps] current GPU freq: 534 MHz (207)
[ 1.730253] [drm:valleyview_enable_rps] setting GPU freq to 534 MHz (207)
[ 2.437117] [drm:i915_gem_open]
[ 3.017984] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.018000] [drm:drm_mode_getresources] [CRTC:21]
[ 3.018004] [drm:drm_mode_getresources] [CRTC:26]
[ 3.018009] [drm:drm_mode_getresources] [ENCODER:30:DAC-30]
[ 3.018012] [drm:drm_mode_getresources] [ENCODER:31:TMDS-31]
[ 3.018016] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36]
[ 3.018020] [drm:drm_mode_getresources] [CONNECTOR:29:VGA-1]
[ 3.018024] [drm:drm_mode_getresources] [CONNECTOR:32:HDMI-A-1]
[ 3.018028] [drm:drm_mode_getresources] [CONNECTOR:37:DP-1]
[ 3.018032] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.018044] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[ 3.018050] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:VGA-1]
[ 3.018055] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:29:VGA-1] disconnected
[ 3.018065] [drm:drm_mode_getconnector] [CONNECTOR:29:?]
[ 3.018077] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
[ 3.018082] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1]
[ 3.018087] [drm:intel_hdmi_detect] [CONNECTOR:32:HDMI-A-1]
[ 3.018093] [drm:intel_power_well_enable] enabling display
[ 3.026014] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
[ 3.114064] [drm:intel_hdmi_detect] Live status not up!
[ 3.114075] [drm:intel_power_well_disable] disabling display
[ 3.123111] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:HDMI-A-1] disconnected
[ 3.123137] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
[ 3.123154] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
[ 3.123160] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1]
[ 3.123164] [drm:intel_dp_force] [CONNECTOR:37:DP-1]
[ 3.123169] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:37:DP-1] disconnected
[ 3.123177] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
More information about the Intel-gfx
mailing list