[Intel-gfx] [PATCH 15/15] drm/i915: Reject mixing MST and SST/HDMI on the same digital port

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

We can't mix MST with SST/HDMI on the same physical port, so we'll need
to reject such configurations in check_digital_port_conflicts(). Nothing
else will prevent this as MST has its fake encoders and its own connectors
so the cloning checks won't catch this.

The same digital port can be used multiple times, but only if all the
encoders involved are MST encoders, so we only want to check MST vs.
SST/HDMI, not MST vs. MST. And SST/HDMI vs. SST/HDMI we already check.

Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 02764a4c2f0d..7c103f6eee6e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12303,6 +12303,7 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
 	struct drm_device *dev = state->dev;
 	struct drm_connector *connector;
 	unsigned int used_ports = 0;
+	unsigned int used_mst_ports = 0;
 
 	/*
 	 * Walk the connector list instead of the encoder
@@ -12339,11 +12340,20 @@ static bool check_digital_port_conflicts(struct drm_atomic_state *state)
 				return false;
 
 			used_ports |= port_mask;
+			break;
+		case INTEL_OUTPUT_DP_MST:
+			used_mst_ports |=
+				1 << enc_to_mst(&encoder->base)->primary->port;
+			break;
 		default:
 			break;
 		}
 	}
 
+	/* can't mix MST and SST/HDMI on the same port */
+	if (used_ports & used_mst_ports)
+		return false;
+
 	return true;
 }
 
-- 
2.7.4