[Intel-gfx] [CI 01/15] drm/i915: Move panel's backlight setup next to panel init

Chris Wilson chris at chris-wilson.co.uk
Fri Jun 24 13:00:13 UTC 2016


Currently setting up the backlight for a panel is sometimes done
together with initialising the panel, and sometimes after the connector
is registered. The backlight setup does not depend upon connector
registration (i.e. access to sysfs/debugfs and the kobject hierachy) so
perform it consistently just after panel initialisation.

Note the discrepancy here as destroying the panel is done during
connector unregistration...

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_drv.h  | 3 ++-
 drivers/gpu/drm/i915/intel_dsi.c  | 3 +--
 drivers/gpu/drm/i915/intel_lvds.c | 3 +--
 3 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 1f82dccfcd58..ca2de043b9ce 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1496,7 +1496,8 @@ void intel_gmch_panel_fitting(struct intel_crtc *crtc,
 			      int fitting_mode);
 void intel_panel_set_backlight_acpi(struct intel_connector *connector,
 				    u32 level, u32 max);
-int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe);
+int intel_panel_setup_backlight(struct drm_connector *connector,
+				enum pipe pipe);
 void intel_panel_enable_backlight(struct intel_connector *connector);
 void intel_panel_disable_backlight(struct intel_connector *connector);
 void intel_panel_destroy_backlight(struct drm_connector *connector);
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index b444d0e35a98..ae2dcaf1b52e 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1587,13 +1587,12 @@ void intel_dsi_init(struct drm_device *dev)
 	connector->display_info.height_mm = fixed_mode->height_mm;
 
 	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
+	intel_panel_setup_backlight(connector, INVALID_PIPE);
 
 	intel_dsi_add_properties(intel_connector);
 
 	drm_connector_register(connector);
 
-	intel_panel_setup_backlight(connector, INVALID_PIPE);
-
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 935b53642948..6306c5499587 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -1120,6 +1120,7 @@ out:
 	mutex_unlock(&dev->mode_config.mutex);
 
 	intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
+	intel_panel_setup_backlight(connector, INVALID_PIPE);
 
 	lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
@@ -1134,8 +1135,6 @@ out:
 	}
 	drm_connector_register(connector);
 
-	intel_panel_setup_backlight(connector, INVALID_PIPE);
-
 	return;
 
 failed:
-- 
2.8.1



More information about the Intel-gfx mailing list